What is the operation method for starting and moving off with the Hongqi HS5?

1 Answers
VonEllie
07/25/25 11:26am
The operation method for starting and moving off with the Hongqi HS5 is as follows: 1. Press the start button while keeping your right foot on the brake pedal; 2. Move the gear selector to the D (Drive) position for forward movement; 3. Release the parking brake lever; 4. Gradually release the brake pedal; 5. Move your right foot to the accelerator pedal and gently press it to move forward. Taking the 2019 Hongqi HS5 as an example, it is a mid-size SUV with the following dimensions: length 4760mm, width 1907mm, height 1700mm, wheelbase 2870mm, fuel tank capacity 64 liters, and curb weight 1755kg.
Was this review help?
14
2
Share
More Forum Discussions

Will the driving test appointment be automatically canceled if it fails?

If the driving test appointment fails, it will be automatically canceled. Here are the relevant details: Rebooking: If the appointment shows as failed, there is no need to take any action or manually click to cancel. After the system automatically updates, it will return to the appointment interface, allowing you to rebook the test. Regulations: According to regulations, if the test appointment quota is not fully booked, the appointment results will be announced three working days before the test, which is the deadline for test appointments. If the quota is fully booked, the appointment results will be announced five working days before the test, which is the deadline for test appointments. Only after the appointment fails or is canceled can you rebook the test time and location.
3
2
Share

Can fog lights modified to golden light pass the annual inspection?

Fog lights modified to golden light can pass the annual inspection. Here are the relevant details: Legal modification: It is legal to change car fog lights to golden light, but modifications must not alter the vehicle's exterior appearance, structure, framework, or performance. Fog lights, typically installed at the front and rear of a car, are used to illuminate the road and provide safety warnings during rainy or foggy conditions. Purpose of fog lights: In foggy or rainy weather where visibility is significantly affected, fog lights help other vehicles see your car. Therefore, fog light sources need strong penetration capability. Most vehicles use halogen fog lights, while xenon fog lights are a more advanced option. Fog lights must be installed below the bumper, at the lowest point of the vehicle body closest to the ground, to ensure their effectiveness. If installed too high, the light cannot penetrate the fog to illuminate the road (as fog is generally thinner below 1 meter), which can easily lead to hazards.
3
3
Share

Is it harmful for lithium batteries to get rained on?

Lithium batteries cannot be used after being rained on. Here are the specific details: Hazards of being rained on: If the battery swells after being rained on, do not use it to avoid explosions and spontaneous combustion. Generally, temperature has a significant impact on the lifespan of lithium batteries. Temperatures below freezing can cause lithium batteries to burn out instantly upon activation, while excessively high temperatures can also reduce the battery's capacity. Precautions for storing lithium batteries: If lithium-ion batteries are stored unused for a long time, they should be charged and discharged once every six months. During transportation, precautions should be taken to prevent moisture, dampness, compression, and collisions to avoid battery damage. Do not use or store batteries in high-temperature environments (such as under scorching sunlight or in very hot cars), as this may cause overheating, fire, functional failure, or shortened lifespan. Avoid storing batteries in areas with strong static electricity or magnetic fields, as this can damage the battery's safety protection mechanisms and create potential hazards. If the battery emits an odor, overheats, changes color, deforms, or exhibits any abnormalities during use, storage, or charging, immediately remove the battery from the device or charger and discontinue use. Proper storage of lithium batteries is essential to prevent explosions and potential losses.
2
2
Share

What are the dimensions for a driver's license photo?

Driver's license photo dimensions are 2.5cm × 3.5cm. Below are the relevant requirements: Photo specifications: Photo dimensions are measured in inches, where 1 inch = 2.54cm. Typically, X-inch refers to the length of the longer side of the photo in inches. All photos must be recent, front-facing, color headshots with no hats, with the head occupying 2/3 of the photo dimensions, on a white background without borders. The image should be clear, with rich layers, natural expression, and no obvious distortion. Other materials required for the test: For local residents applying for a driver's license, the required documents are: household registration book and valid ID card. For non-local residents applying for a driver's license, the required documents are: ID card and temporary residence permit. Fill out and submit the "Motor Vehicle Driver Physical Condition Certificate".
1
5
Share

How often should a driver's license be reviewed?

C, D, E, and F class driver's licenses do not require annual review, while A and B class driver's licenses need to undergo an annual review once a year. The review must be conducted within thirty days after the end of the scoring cycle of the driver's license at the traffic management department of the public security authorities. However, if there is no record of violating traffic safety laws and regulations within a scoring cycle, the driver's license can be exempted from the annual review for that cycle. If a driver's license that requires an annual review fails to undergo it, it can be reviewed retroactively within three years. A and B class driver's licenses that have not been reviewed for more than three years will be downgraded, with the maximum downgrade being to a C1 class driver's license. Preparation before reviewing the driver's license: Handling violations: Before reviewing the driver's license, all violation information must be processed, and fines must be paid in full; otherwise, the review cannot proceed. Physical examination: During the review, a "Driver's Physical Condition Certificate" must be submitted. Additionally, the physical condition certificate must be issued by a medical institution at or above the county level or a military regiment-level hospital. ID photo: The review requires submitting a recent 1-inch color, white-background, bareheaded front-facing photo taken within the last six months. If you do not have one, you should promptly go to have it taken.
20
0
Share

What are the contents of a driver's license?

Motor vehicle driving license consists of three parts: the license holder, the main page, and the supplementary page. Among them: the front of the main page is the signed core, and the back is the photo of the motor vehicle, which is sealed with a plastic cover. The supplementary page is the signed core. The following is the relevant introduction: The main page contains text information such as the People's Republic of China Motor Vehicle Driving License, license plate number, vehicle type, owner, address, usage nature, brand model, vehicle identification number, engine number, registration date, and issuance date. The supplementary page contains text information such as license plate number, file number, approved number of passengers, total mass, curb weight, approved load capacity, overall dimensions, approved towing total mass, remarks, and inspection records.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.