What is the operation for left reverse parking?

1 Answers
MacNaomi
07/30/25 5:59am
Move the vehicle forward back to the parking position, shift into reverse gear, and watch the left rearview mirror. When the rear left wheel is about to cover the corner of the parking line, immediately turn the steering wheel fully to the left. Observe the distance between the rear wheel and the left corner of the parking space. If the distance is approximately 30CM, no correction is needed—simply continue reversing. If the distance between the wheel and the corner is less than 30CM, adjust by turning the steering wheel back half a turn to maintain a 30CM gap. Continue reversing while monitoring the rearview mirror. When the car body aligns parallel with the sideline, straighten the steering wheel immediately. If the alignment is uneven, steer toward the wider side. Check the endpoint line behind. When it aligns with the yellow line in the rearview mirror, you can stop the car.
Was this review help?
9
2
Share
More Forum Discussions

How many days after window tinting can I roll down the windows?

You should wait 7 days after window tinting before rolling down the windows. Theoretically, the film usually sets within 3 days, but this is just a theoretical estimate. Since the quality of window films varies, this standard may not always apply, and the actual quality of the film should be considered. Additionally, when choosing a window film, pay attention to the color of the film. If the color does not meet the standards, it may not pass the annual inspection. Some overly dark films can also affect normal driving safety. Moreover, the heat insulation effect of the film is not directly related to its darkness; the coating technology inside the film is the key factor determining its heat insulation performance. Generally, films with a heat insulation rate of 60% on the market are considered good products.
2
1
Share

How to reset the maintenance light on Citroen C5?

The method to reset the maintenance light on Citroen C5: First, turn off the ignition switch of the C5, then press and hold the CHECK maintenance mileage reset button. Turn on the ignition switch, and you will see the odometer start counting down. When the display shows "Initialization completed" or reaches 0, you can release the button. At this point, the wrench symbol, which is the maintenance indicator light, has been successfully reset. The dimensions of the Citroen C5 are 4805mm in length, 1860mm in width, and 1458mm in height, with a wheelbase of 2815mm. The Citroen C5 is equipped with a new 2.3L displacement engine, which is a new generation of all-aluminum high-efficiency engine designed and developed by the PSA Peugeot Citroen Group R&D Center. It has a maximum power of 126kw and a maximum torque of 230nm.
5
4
Share

How to Open the Hood of a Chevrolet Car?

Opening the hood of a Chevrolet car requires a two-step unlocking process. First, pull the unlocking mechanism inside the engine compartment (located on the panel above the driver's left foot), then move to the front of the engine compartment and lift the unlocking lever to open the hood. Chevrolet is a brand under the General Motors Group, with models including Trax, Trailblazer, Equinox, Lova, Aveo, and New Sail. Among them, the Sail is a joint-venture brand model marketed specifically as a family sedan, with body dimensions of 4249mm in length, 1690mm in width, and 1705mm in height. It is equipped with a naturally aspirated engine and a five-speed manual transmission.
14
4
Share

What is the ground clearance of the Chevrolet Equinox?

The ground clearance of the Chevrolet Equinox is 17cm, approximately 20cm when unloaded. The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a vehicle. It supports and installs the car's engine and its various components and assemblies, forming the overall shape of the vehicle, bearing the engine's power, and ensuring normal operation. The Chevrolet Equinox is a mid-size SUV with dimensions of 4652mm in length, 1843mm in width, and 1684mm in height, and a wheelbase of 2725mm. Some models of this vehicle are equipped with additional features such as leather seats, an electric trunk, GPS navigation system, and Type-C interfaces.
1
3
Share

How to Replace Coolant in a Chevrolet Cruze?

The method for replacing coolant in a Chevrolet Cruze is as follows: 1. Open the car hood, locate the coolant reservoir, find the drain plug at the bottom along the drain pipe, unscrew the drain plug at the bottom, and allow the coolant to drain from the drain plug hole; 2. Alternatively, you can directly disconnect the drain hose. The advantage of this method is faster and more thorough drainage, and there's no need to lift the vehicle with a jack. The protective functions of coolant include: 1. Providing anti-corrosion protection for components of the cooling system; 2. Preventing scale buildup to avoid reducing the radiator's heat dissipation efficiency; 3. Ensuring the engine operates within the normal temperature range.
4
1
Share

Where is the Cabin Air Filter Located on the Cruze?

The cabin air filter of the Cruze is located behind the glove box on the passenger side. Open the glove compartment, and you will find limit clips on both inner sides. Remove them by hand to lower the glove box. Inside, there is a black plastic cover secured by three clips. Unfasten the clips by hand to remove the cover, and you will see the cabin air filter, which can be pulled out by hand. The Chevrolet Cruze is a compact sedan under the Chevrolet brand, with body dimensions of 4666mm in length, 1807mm in width, and 1460mm in height, and a wheelbase of 2700mm. The Chevrolet Cruze is a new-generation model developed by General Motors with the goal of creating a benchmark in design and performance for compact cars, integrating global resources.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.