What is the OnStar Smart Rearview Mirror?

1 Answers
LePaige
07/29/25 12:21pm
The OnStar Smart Rearview Mirror is a device connected to the OnStar system. This device primarily features three buttons: a gray RESET button, a blue ON button, and a red SOS button. The gray RESET button can activate, turn on/off, or restart the OnStar system. The blue ON button connects to OnStar's customer service for consultations, such as providing vehicle location or addressing any issues encountered while using OnStar. The red SOS button is mainly used for emergency calls in situations like traffic accidents or vehicle breakdowns. Pressing this button connects the user to OnStar customer service, who will then guide third-party rescue personnel to the scene, such as ambulances, traffic police, or towing services. The OnStar Smart Rearview Mirror is an automotive rearview mirror with an independent operating system and runtime environment, capable of delivering rich functionalities via wireless networks. Here’s some relevant information: OnStar is a joint venture established by General Motors, SAIC Group, and Shanghai GM. Users of the OnStar Smart Rearview Mirror can install third-party applications, games, navigation, and other services as needed, and can access wireless networks via WiFi or mobile data. Beyond personalized services, the mirror also offers features like driving recording, GPS positioning, and rearview camera functionality. Special Feature: Unlike other smart rearview mirrors, the OnStar mirror includes automatic anti-glare sensing, enhancing nighttime driving safety for drivers.
Was this review help?
11
1
Share
More Forum Discussions

How to Start an Automatic Transmission Car with One-Key Start?

When it's ready to start, the driver can press the start button once, the ACC light will turn on, then press the brake and press the one-key start button to ignite and start the engine. You can choose to warm up the car in place, and the duration depends on the environment. The driver should maintain a safe distance from the vehicle in front to reduce potential safety hazards. Shift to D gear, release the handbrake, slowly release the foot brake, gently press the accelerator, and the one-key start process is completed.
1
1
Share

How to Set the Sunroof on a 2012 Passat?

First, manually force the sunroof to close. Remove the overhead light cover panel (the panel with the sunroof switch), disconnect the motor wiring harness plug or disconnect the negative battery cable, wait for 10 seconds, and then reconnect the wiring harness or power. Rotate the switch from the closed position to the open position by about 15 degrees, then quickly rotate it back to the closed position. After turning off the ignition switch for 5-7 seconds, the sunroof setting memory is completed.
13
4
Share

How to reset the tire pressure monitoring light on a 2021 Sagitar?

Park the car in a garage or safe area. Start the vehicle, turn on the central control screen, and click the button marked by the red frame. Find the "Tire" option marked by the red frame on the central control screen and click to enter. Click the "SET" button marked by the red frame to proceed to the next step of settings. Click the "Confirm" button marked by the red frame to proceed to the next step of settings. Click "Tire Pressure Monitoring Initialization" to reset the tire pressure warning light.
14
2
Share

How to Deal with Rust Inside Car Tires?

Tires that need rectification appear rusty after being removed. Prepare rust remover and tools. Cut sandpaper into suitable sizes, using 80-grit coarse sandpaper. Flatten the top of a stick and proceed with the operation. Spray the oxidation solution on the rusty areas. Use the wrapped sandpaper to scrub back and forth on the areas sprayed with the oxidation solution, applying slightly more force. Repeat the scrubbing for about half an hour, and the effect will be noticeable. If the rust is severe, it's best to take the vehicle to a repair shop and have the rust thoroughly sanded off.
20
4
Share

What is the tutorial for removing the headlights of a Sagitar?

There are fixing screws between the headlight and the headlight guard plate. The most easily noticeable are the two screws on top. Remove these two screws. You will find a screw fixed to the radiator frame at the lower right of the headlight. Remove this screw. The last screw fixing the headlight is located beneath the headlight. Remove this screw and keep it safe for reinstallation. Hold the edge of the headlight with your hand and pull it backward. This will make it easier to locate the wiring harness connector of the headlight and avoid scratching the headlight surface. Then gently pull out the wiring harness connector by hand to avoid breaking the conductive wires inside the connector.
1
5
Share

What is the correct way to close a car door with proper force?

This action is actually quite simple. When pulling the door inward, pause for a moment when it is about half a foot away from closing. Then apply a little more force, and the door will close smoothly with minimal vibration and noise. Both the driver and passengers will find it acceptable.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.