What is the oil specification for the Leiling 1.2t?

1 Answers
StAnna
07/29/25 8:37pm
Toyota Leiling 1.2t engine uses 5W-30 oil. Here is some relevant information: 1. There are three types of engine oil used in cars: mineral oil, semi-synthetic oil, and fully synthetic oil. Compared to mineral oil and semi-synthetic oil, fully synthetic oil performs better, has a longer service life, and provides better protection for the engine. 2. During engine operation, oil is essential as it forms a protective film inside the engine, offering enhanced protection and extending the engine's lifespan. 3. Low-temperature viscosity grades: These include 0W, 5W, 10W, 15W, 20W, and 25W. The smaller the number, the better the cold-start performance at low temperatures. 'W' stands for winter, indicating low-temperature performance. For example, 0W oil freezes at -35°C, while 5W oil freezes at -30°C. 4. High-temperature viscosity grades: These represent the viscosity at 100°C and include 20, 30, 40, 50, and 60. The higher the number, the greater the viscosity. 5. All-season oil: Specifications like 5W-40, which include both low and high-temperature viscosity grades, indicate all-season oil. Most modern vehicles use all-season oil, eliminating the need to change oil with the seasons.
Was this review help?
6
5
Share
More Forum Discussions

How to resolve the driving system malfunction in Audi A4L?

When the brake pads with wear sensors reach their limit, the sensor wire automatically completes the circuit, triggering the warning light. Low brake fluid level will also be accompanied by significantly reduced braking force, and in severe cases, complete loss of braking power may occur.
16
3
Share

What is the Function of an Automotive Air Suspension System?

Introduction to the functions of an automotive air suspension system: 1. Control the damping force of the shock absorber: The air suspension system collects signals from sensors such as the vehicle speed sensor, steering angle sensor, and body height sensor. After processing by the suspension ECU, it controls electromagnetic or stepper motor actuators to adjust the damping force of the shock absorber. During sharp turns, rapid acceleration, or emergency braking, it suppresses vehicle "squat," "dive," and roll, preventing excessive changes in vehicle posture, thereby improving handling stability. 2. Adjust the stiffness of the elastic element: The air suspension system adjusts the stiffness of the shock absorber by changing its elastic coefficient, allowing the vehicle to freely choose between sport mode or comfort mode based on actual driving needs. 3. Adjust the vehicle height: One of the main functions of the air suspension system is to maintain the vehicle height within a reasonable range under various operating conditions. If the vehicle remains too high off the ground for an extended period, driving will feel very bumpy, as if no shock absorbers are installed. If the vehicle is too close to the ground, the lower part of the chassis may easily collide with uneven surfaces, or even render the vehicle undrivable. The electronically controlled air suspension system automatically compresses or extends the air springs by controlling the air compressor, height control valve, and exhaust valve, thereby reducing or increasing the ground clearance of the chassis to maintain the vehicle at an appropriate height.
7
4
Share

What to Do When the Handbrake Won't Release During Hill Start?

There is a button on the top of the handbrake lever. Use your right hand to grip the lever, press the button with your thumb, and lift the lever upward with the other four fingers to reset the button. Drive slowly on a flat road, gently pull the handbrake lever, and feel its sensitivity and engagement point.
3
1
Share

How to Solve the Random Jumping Issue of the Central Lock on Baojun 560 Door Locks?

If the central lock jumps randomly while driving, it indicates that the central lock's power ground or the brake light power line is damaged. It is recommended to visit a repair shop to troubleshoot the issue. The central lock, short for central control door lock, is a type of automotive accessory. If damaged, replacing the central lock motor gear should resolve the problem.
1
3
Share

Where are domestic BMWs produced?

Domestic BMWs are produced in Shenyang City, Liaoning Province. Domestic BMW is a joint venture established through investment by BMW Group and Brilliance China Automotive Holdings Limited. Below is relevant information about domestic BMW: 1. The mid-size SUV under Brilliance BMW has body dimensions of 4717mm in length, 1891mm in width, and 1689mm in height, with a wheelbase of 2864mm. 2. BMW's drive system is front-engine four-wheel drive, with the front suspension using a double-joint spring strut front axle and the rear suspension employing a multi-link independent suspension. The tire specification is 245/50R19.
17
2
Share

How to Replace the Battery in a Ford Key?

Here are the steps to replace the battery in a Ford key: 1. First, press the button on the key fob to open the remote key. 2. Find a coin (preferably a 1-yuan coin, but a 5-jiao coin can also be used) and insert it into the key slot as a tool to pry open the key cover. 3. Apply force by twisting the edge of the coin clockwise, and the key cover will open easily. 4. Use a pointed object, such as one end of a paperclip, to gently lift the battery, which will pop out. Note and confirm the battery model. The battery model is CR-2025, and the original battery is made in Indonesia. 5. Finally, replace it with a new battery and snap the key cover back into place.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.