What is the oil specification for the Envision?

1 Answers
DelPiper
07/30/25 3:22am
The oil specification for the Envision is 5W30 fully synthetic oil, and approximately 5.4L is required during maintenance. According to the Buick Envision's maintenance manual, maintenance is required every 5,000 kilometers. The Envision models currently on sale are the 2019 models, divided into National V and National VI versions. The Envision has dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm. The Envision is available in both two-wheel drive and four-wheel drive versions, featuring a front-engine four-wheel-drive layout with an on-demand four-wheel-drive system. The front and rear brake types are ventilated disc and disc, respectively, with an electronic parking brake.
Was this review help?
18
5
Share
More Forum Discussions

How often should front brake pads be replaced?

The replacement interval for front brake pads is 60,000 to 80,000 kilometers or 3 to 4 years. Precautions for replacing brake pads are as follows: After installing new brake pads, the surface of the pads will be flat while the contact surface on the brake disc will be uneven, which may result in so-called "ineffective braking". Therefore, new brake pads must undergo a break-in period. Find a location with good road conditions and minimal traffic for the break-in process. Accelerate to 60 km/h, then gently apply the brakes with moderate force to reduce speed to 10 km/h. Release the brakes and drive several kilometers to allow the brake pads to cool slightly before repeating the above steps at least 10 times. The broken-in brake pads still require several hundred kilometers of driving to achieve optimal performance with the brake discs. During this period, drive carefully to prevent accidents.
15
1
Share

Does Idling the Car with the Heater On Consume Fuel?

Idling the car with the heater on does not consume fuel. Below are the reasons why using the heater doesn't consume fuel and some precautions: Reasons why using the heater doesn't consume fuel: The heater utilizes excess heat generated during engine operation. If the heater is not used, this heat is dissipated into the air through the cooling system, including the radiator and cooling fins, via the circulation of coolant. Therefore, under normal circumstances, the impact of using the heater on fuel consumption is negligible. Precautions when using the heater: Avoid turning on the heater immediately after a cold start. Wait 3 to 5 minutes until the engine coolant reaches normal operating temperature before activating the heater. When the car is first started, the engine oil needs time to circulate from the oil pan to lubricate all components. Turning on the heater during this period can lead to insufficient lubrication, increased friction, and higher engine load, which may result in higher fuel consumption.
8
3
Share

Why Does the Car Air Conditioner Only Cool but Not Heat?

Here are the detailed reasons why the car air conditioner does not produce heat: 1. Poor operation of the heating control mechanism leads to insufficient heating. 2. Issues with the engine cooling system cause the car heater to not produce heat. Below is a detailed explanation of the car heating system: 1. Check the temperature of the two inlet pipes of the heater core. If both pipes are hot, the problem lies with the airflow control mechanism. Conversely, if both pipes are cold, or if one is hot and the other is cold, the issue is with the cooling system. 2. The car heater uses a blower to direct heat from the heater core into the cabin. If the airflow is insufficient or the distribution of hot and cold air is poor, preventing the heat from the heater core from being effectively released, the temperature of the heater will not rise.
12
2
Share

Is There Any Harm in Having a Driver's License Bound to a Company?

There is no harm in having a driver's license bound to a company. A driver's license can be bound to three vehicles, and binding it to a company vehicle does not affect binding the other two vehicles. The functions of a driver's license are as follows: 1. Purchasing tickets: When buying tickets for travel, you can present your driver's license to purchase tickets. Generally, ticket sales staff will provide ticket sales services because the number on the driver's license is completely consistent with the ID card number, fully serving as proof of identity. 2. Hotel check-in: Hotels can use the driver's license as a basis, serving the same function as an ID card. 3. Medical registration: A driver's license can be equivalent to an ID card and is considered a valid document. However, it can only be used for registration at manual service counters; it cannot be used for quick registration or self-service registration.
13
5
Share

What is the function of a car throttle position sensor?

The main function of the car throttle position sensor is to detect whether the engine is in idle state or load state, and whether it is in acceleration or deceleration state. Detailed information is as follows: 1. The rotating shaft of the resistor is linked with the throttle, and it has two contacts: the full-open contact and the idle contact. When the throttle is in the idle position, the idle contact closes, and the idle signal is output to the computer; 2. When the throttle is in another position, the idle contact opens, outputting voltage signals corresponding to different rotation angles of the throttle. The computer identifies the engine load based on the signal voltage value; 3. The computer recognizes whether the working condition is acceleration or deceleration based on the change of the signal voltage over a certain period of time. The computer adjusts the fuel injection amount or performs fuel cut-off control based on these working condition information.
4
1
Share

What does the MAX button in the car mean?

In the car, the MAX button is usually the strong cooling button for the air conditioning. Here is some relevant information about the MAX button in cars: How to use the MAX button: Generally, only the air conditioning system in the car has a MAX button. When the MAX button is pressed, the air conditioning will enter the maximum cooling mode, which can quickly lower the temperature inside the car. The car air conditioning is an important comfort feature in a vehicle. The cooling principle of the air conditioning is actually quite simple. When cooling is needed, the AC button must be pressed so that the compressor clutch engages, allowing the engine to drive the compressor. The compressor then continuously compresses the refrigerant and delivers it to the evaporator. Meaning of MAX in other locations: If MAX is found on the engine oil dipstick, it indicates the maximum oil level. When adding oil, ensure that the oil level does not exceed the MAX mark.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.