What is the oil specification for the Baojun 560?
2 Answers
The original engine oil for the Baojun 560 is SM or higher grade 5W-30 oil, with each oil change requiring no more than 4.5L. The steps for changing the oil in the Baojun 560 are as follows: 1. Run the engine until it reaches operating temperature. Then use a jack to lift the vehicle, engage the handbrake, and secure the front wheels with wooden wedges. 2. Place an old oil container under the oil pan, locate the oil pan drain bolt, and slowly loosen the drain bolt, being careful not to come into contact with the hot oil. Allow the oil to drain for a while. Inspect the drain bolt and reinstall it, taking care not to overtighten it to prevent damage to the oil pan. 3. Move the oil container under the oil filter, use an oil filter wrench to loosen the filter, and then unscrew it by hand. If the filter is still hot, remember to wear gloves. Even if the filter was previously tightened very securely, there is no need to worry about damaging it during removal, as long as the filter mounting interface and surrounding components are not damaged, since the removed filter will not be reused. 4. Apply new oil to the gasket of the new filter. If the filter is installed vertically, you can pour some new oil into the filter to reduce dry friction during the next engine start. Screw the filter in by hand and tighten it according to the instructions (usually an additional 3/4 turn after hand-tightening). 5. Pour the new oil into the oil pan, referring to the user manual for guidance. Use a funnel to prevent spilling oil on the engine exterior. Check for leaks under the engine. If there are no leaks, lower the vehicle, check the oil dipstick, and start the engine. The indicator light on the dashboard should turn off immediately after starting. Finally, turn off the engine and recheck the oil level, and dispose of the old oil and filter according to local regulations.
I've been driving my Baojun 560 for almost three years now, and it's been great. Different engine models affect the choice of oil type. Generally, the new car manual recommends using 5W-30 or 5W-40 full synthetic oil. My 1.5T engine is paired with 5W-30. The 'W' stands for winter fluidity, ensuring smooth cold starts. The viscosity at high temperatures protects the engine internals. Choosing the wrong type can affect fuel consumption and lubrication effectiveness. You should change the oil every 10,000 to 20,000 kilometers. I remember changing it during my last service, and the mechanic checked that the dipstick level was normal. It's a good habit to check the oil level a few minutes after parking, before driving—don't wait until the oil light comes on to regret it. I recommend following the manual or checking the Baojun official website for specific oil types, and avoid making random changes.
