What is the oil specification for Dongfeng Honda?

3 Answers
McStephen
07/29/25 3:50pm
Dongfeng Honda's dedicated oil specifications include 0W20, 5W30, and 5W40. The original Honda oil is sourced from Nisseki oil, a joint venture between Nisseki and Great Wall. For later maintenance oil changes, you can choose brands such as Mobil, Shell, Castrol, and Total. The viscosity of the oil changes with temperature, so special attention is needed to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity index better at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing oil in a Dongfeng Honda is as follows: Wait for the engine temperature to drop and allow the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine for 30 seconds to allow the oil in the main oil passage to drain. Use a special wrench to remove the oil filter. Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new oil through the engine valve cover's oil filler port. Generally, fill about three-quarters of a bottle. Start the engine and let it run for 5 minutes. Check for leaks around the oil drain plug and oil filter. If there are any leaks, perform necessary repairs. After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
Was this review help?
16
1
Share
AylaAnn
08/15/25 3:38am
As an owner of a Dongfeng Honda vehicle, I've noticed that models like the Civic or CR-V typically recommend using 0W-20 full synthetic engine oil. This grade flows quickly at low temperatures, making cold starts easier in winter, while also providing excellent engine protection against excessive wear under high temperatures. Personally, I change the oil every six months or 10,000 kilometers, opting for reputable brands like Shell or Mobil. The cost is reasonable, around 100 yuan per bottle, with an oil change totaling just a few hundred yuan. Once, I tried saving money by using 5W-40 oil, which resulted in increased fuel consumption and sluggish acceleration—a lesson well learned. I recommend checking your new car's maintenance manual for the correct oil specification and avoiding random substitutions. Regularly monitoring your oil's condition ensures safe and smooth driving. For manual transmission owners, periodic checks provide added peace of mind.
Was this review help?
7
3
Share
Expand All
DelEvan
10/12/25 4:14am
Having driven cars for over a decade, I've learned that choosing the right engine oil for Dongfeng Honda models primarily depends on the engine type. Commonly used grades like 0W-20 or 5W-30, preferably full synthetic, are better suited for modern engines. Using the correct oil extends vehicle lifespan and prevents wear and abnormal noises. I've witnessed cases where wrong oil grades were used, such as mistakenly opting for higher viscosity oil, leading to poor lubrication and doubled repair costs. For winter, thinner oils like 0W-20 are recommended for easier cold starts, while 5W-30 works in summer but avoid overly thick variants. Maintain oil change intervals between 7,500 to 10,000 kilometers, purchase from authorized channels, and remember: saving small amounts might cost you big in engine maintenance. Ensuring proper oil selection guarantees stable engine performance.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What is the working principle of engine valves?

The working principle of engine valves is driven by the camshaft through tappets and push rods. Symptoms of engine valve leakage: Valve leakage leads to weak vehicle performance, excessively rich or lean air-fuel mixture, incomplete combustion of fuel in the combustion chamber, resulting in increased fuel consumption; Valve leakage can also cause slow acceleration. Engine valve leakage can make the engine difficult to start, reduce power, cause incomplete combustion, severe carbon buildup, and even lead to individual cylinders not working. Causes of engine valve leakage: Valve burning leads to decreased sealing between the valve and valve seat; Valve clearance adjusted too small, causing the valve to not close tightly; Carbon buildup on the conical surface of the valve and valve seat; Foreign objects stuck during valve installation causing poor sealing; Pitting, scratches, spots, burns, or dents on the valve working surface; Poor grinding of valve sealing rings during maintenance; Excessive runout of the valve and valve stem; Excessive coaxiality deviation between the valve guide hole and seat hole.
20
4
Share

What is the CLA?

According to Mercedes-Benz's official introduction, the CLA is a compact four-door coupe, categorized as an A-segment vehicle. Its body dimensions are 4654*1777*1417mm, which aligns with the positioning of cars in this class. It features frameless doors and smooth body lines, making it popular among many young people. Additional information: 1. CLA's powertrain: The CLA offers a choice between a 1.6-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.6-liter low-power version delivers a maximum horsepower of 122 hp, while the high-power version produces 156 hp. The 2.0-liter low-power version has a maximum horsepower of 184 hp, and the high-power version reaches 211 hp. 3. CLA's transmission: In terms of transmission, the CLA is equipped with a 7-speed dual-clutch transmission across all models. 4. CLA's drivetrain: For drivetrain options, the CLA is available in both front-wheel drive and all-wheel drive configurations. 5. CLA's suspension: Regarding suspension, the CLA features a McPherson strut independent front suspension and a multi-link independent rear suspension.
15
4
Share

What is the torque specification standard for Volkswagen vehicles?

Automotive cylinder head connecting rod cap crankshaft cap bolts have a torque of 8 for the main bearing cap and 6 for the small bearing cap. The compression ratios of engines vary by model, so the bolt torque specifications also differ. The standard torque specifications for Volkswagen vehicles are as follows: 1. Class A: Iron screws fixed with iron nuts (threaded holes). For example: assembly of various components in the housing; grounding screws and nuts. 2. Class B: Iron screws with copper nuts (threaded holes and aluminum alloy threaded holes). For example: fixing transistors or wire terminals on aluminum heat sinks; fixing aluminum heat sinks on PCBs; fixing screws for large capacitors or transistor terminals; fixing RS-232 hexagonal copper pillars. 3. Class C: Iron screws locked into plastic holes. For example: fixing plastic panels to the housing; fixing PCBs on plastic panels. 4. Class D: Iron screws locked into tapped holes with a plate thickness of 1.0.
13
3
Share

Why does Volkswagen CarPlay prompt 'unlocked'?

Check if there is an issue with the wiring itself, verify whether the wiring is compatible with the phone, or review the phone's settings. Below are the specific details: 1. CarPlay: It is an in-car system released by Apple Inc., seamlessly integrating users' iOS devices and iOS experience with the dashboard system. It allows the majority of basic functions of an iPhone to be used through the car's control panel. Some of these features include the Siri voice assistant tool, iTunes music playback, Apple Maps, and messaging services. 2. Ways to control CarPlay: Siri: You can communicate with the car through Siri, instructing the car on what to do next. You can also hear the system announce messages received on the phone and respond using voice dictation. Touchscreen display: Some cars that support CarPlay are equipped with a touchscreen display, enabling the launching or closing of apps on a fairly simple home screen. Physical buttons: Cars with physical buttons offer another way to control CarPlay, with controls like volume adjustment and track switching seamlessly integrated.
15
4
Share

What is the curb weight of the BMW 5 Series?

The weight of the BMW X5 is generally 2.24 tons. The domestic BMW 5 Series has a curb weight of 1740KG. Interior of the BMW X5: The interior design feels familiar, but the new BMW X5 uses higher-grade decorative materials. Except for the driving dashboard, the entire console appears lower, enhancing the brightness of the cabin space. The central LCD display has been replaced with a large, independently designed thin-screen. Additionally, the new BMW X5 incorporates real wood trim and silver decorative frames. Due to the increased dimensions of the new car, the interior space feels more spacious, and the rear trunk space has been expanded to 1870 liters. Powertrain of the BMW X5: The entry-level model of the new-generation X5 will be equipped with a 2.0T engine delivering a maximum power of 245 horsepower. Furthermore, the new car will also feature 3.0T and 4.4T engines. The engines are paired with an 8-speed automatic transmission from ZF.
2
4
Share

How to Pass the Color Vision Test for Driver's License Renewal?

Here are methods to pass the color vision test for driver's license renewal: 1. Take the test under sufficient lighting: The more adequate the lighting, the more saturated the colors will appear, making it easier for individuals with color vision deficiency to distinguish them; 2. Wear color-correcting glasses: Whether for color vision deficiency or myopia, wearing glasses is permitted during the driver's license medical examination. Therefore, individuals with color vision deficiency can purchase corrective glasses from professional stores to enhance their perception of color contrast; 3. Inform the staff about your condition: Medical personnel will arrange a different color blindness test upon understanding the situation, which increases the chances of passing for individuals with color vision deficiency. Additional information: Color vision deficiency is not the same as color blindness: Color vision deficiency, also known as color vision defect, can be understood as a mild form of color blindness where individuals can recognize colors but with reduced sensitivity. The most intuitive difference is that color blindness prevents color recognition, while color vision deficiency merely impairs color recognition ability, making colors distinguishable only when they are highly saturated. The most common types are red deficiency (protanomaly) and green deficiency (deuteranomaly), with blue deficiency being extremely rare.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.