What is the oil reset method for the Envision?

What is the reason why the automatic start-stop of the Mercedes-Benz A200L does not respond?

Reasons why the automatic start-stop of the Mercedes-Benz A200L does not respond: Failure to meet safety conditions: The vehicle has not reached the ideal working state. Insufficient battery power or low voltage can cause the automatic start-stop to not work. This is because during engine shutdown, the engine cooling fan and in-car air conditioning require power to operate. Engine coolant temperature being too high or too low can also cause the automatic start-stop to not work. Failure to reach the set state: The vehicle has not reached the state set by the driver. When the in-car air conditioning is turned on in summer, if the engine is turned off, the air conditioning compressor will not work. Once the difference between the in-car temperature and the air conditioning set temperature is too large, the automatic start-stop system will restart the engine.

14

1

Share

What is the size of the Volkswagen T-Roc windshield?

The front windshield of the T-Roc measures approximately 145cm in length, 40cm in width, and 6mm in thickness. The T-Roc is a compact SUV produced by FAW-Volkswagen, known for its stylish design and rich features, making it particularly popular among young drivers. Overview of automotive windshields: Car windshields are typically designed as a single-piece, large-curved surface with specific curvatures on all sides. They are primarily made of laminated tempered glass, capable of withstanding strong impacts. Function of windshields: Windshields provide a survival space for passengers. Upon impact and shattering, the glass breaks into small fragments with blunt edges, minimizing the risk of injury to occupants.

10

1

Share

Does the Audi Q7 have autonomous driving?

2021 Audi Q7 does not come with autonomous driving assistance across all trims. Autonomous Driving System: The system employs advanced communication, computer, network, and control technologies to achieve real-time and continuous control over trains. Utilizing modern communication methods, it directly interfaces with trains, enabling bidirectional data communication between the train and ground. This system features fast transmission speeds and large data capacity, allowing following trains and control centers to promptly obtain the exact position of preceding trains. This enhances operational flexibility, improves control efficiency, and better meets the requirements of train autonomous driving. Main Functions of the Autonomous Driving System: The primary functions include bidirectional information transmission between ground and vehicle, as well as comprehensive and emergency handling of operational organization. The ground-vehicle information transmission channel is a crucial component of the train operation automatic control system. The onboard equipment of the automatic control system relies entirely on operational control commands received from the ground control center to operate. It continuously monitors the train's actual speed and the ground's permitted speed commands. If the train speed exceeds the ground operational speed limit, the onboard equipment will implement braking to ensure the safety of train operation.

8

4

Share

Where is the diagnostic interface of Mercedes-Benz ML350?

The diagnostic interface of Mercedes-Benz ML350 is located next to the transmission. A sensor is a detection device that can sense the measured information and convert the sensed information into electrical signals or other required forms of information output according to certain rules. Automotive Fault Diagnostic Tool: An automotive fault diagnostic tool is a vehicle fault self-check terminal. The automotive fault diagnostic tool (also known as a car decoder) is a portable intelligent automotive fault self-check instrument used to detect car faults. Users can quickly read faults in the automotive electronic control system and display fault information through the LCD screen, quickly identifying the location and cause of the fault. How to use the diagnostic tool: Find the diagnostic socket in the car; select the corresponding diagnostic interface; enter the corresponding diagnostic system according to the vehicle model; read the fault codes; view the data stream; clear the fault codes after diagnosis and repair. Diagnostic principle and function: diagnose the status of sensors and actuators in the electronic control system and whether the ECU is working properly. By determining whether the input and output voltages of the ECU change within the specified range, it can be judged whether the electronic control system is working normally.

8

0

Share

How often should the carbon canister of Hongguang S be replaced?

Generally, there is no need to replace the carbon canister, it depends on the situation. If symptoms such as jerking, increased fuel consumption, or gasoline odor occur and troubleshooting is ineffective, then it is necessary to check whether the carbon canister needs to be replaced. It is rare to need to replace the carbon canister; there is no need to worry about it for three to four years or 60,000 to 70,000 kilometers. Regular carbon deposit cleaning, adding gasoline according to the standard octane rating, or using gasoline additives can generally prevent issues with the carbon canister. Introduction to the carbon canister: The carbon canister is usually installed between the gasoline tank and the engine. Since gasoline is a volatile liquid, the fuel tank is often filled with vapor at normal temperatures. The function of the fuel evaporation emission control system is to introduce the vapor into the combustion process and prevent it from volatilizing into the atmosphere. Working process of the carbon canister: Because activated carbon has adsorption capabilities, when the car is running or turned off, gasoline vapor from the fuel tank enters the upper part of the activated carbon canister through the pipeline, while fresh air enters the activated carbon canister from the lower part.

4

5

Share

What is the Impact of Replacing a Cylinder Head Assembly on the Engine?

Replacing a cylinder head assembly affects the engine when components such as pistons and crankshafts are removed and processes like cylinder sleeving are performed. Below is an introduction to automotive generators: 1. Introduction: The automotive generator is the primary power source of a vehicle, functioning to supply power to all electrical devices (except the starter) and charge the battery while the engine is running normally. Based on the three-phase stator winding of a standard AC generator, additional winding turns are added with lead-out terminals, along with an extra three-phase bridge rectifier. At low speeds, the output is from the original and additional windings in series, while at higher speeds, only the original three-phase winding provides output. 2. Classification: Automotive generators can be divided into DC generators and AC generators. Due to the superior performance of AC generators in many aspects, DC generators have been phased out.

2

1

Share

What is the oil reset method for the Envision?

What is the reason why the automatic start-stop of the Mercedes-Benz A200L does not respond?

What is the size of the Volkswagen T-Roc windshield?

Does the Audi Q7 have autonomous driving?

Where is the diagnostic interface of Mercedes-Benz ML350?

How often should the carbon canister of Hongguang S be replaced?

What is the Impact of Replacing a Cylinder Head Assembly on the Engine?

Does the Mercedes-Benz C260 come with Burmester sound system?

What is the reason for the constant flashing of the Prado differential lock light?

What is the reason for the intermittent operation of the Xiali A+ odometer?

What causes the abnormal noise in the Audi A4L dual-clutch transmission?