What is the oil pressure standard for the EA888 engine?

[DeEmmanuel]

The oil pressure standard for the EA888 engine is 6 to 40 bar. The method for changing the oil is as follows: 1. Lift the vehicle, remove the underbody cover, and place a container beneath the oil drain plug; 2. Loosen the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the drain plug and wipe it with a tissue to check for leaks; 3. Reinstall the underbody cover, lower the vehicle, and add oil through the filler port. Precautions for changing the oil: 1. Perform the procedure while the engine is warm to ensure the old oil is drained as thoroughly as possible; 2. Add oil and ensure the amount is appropriate; 3. After adding oil, start the engine and check all components for leaks. Run the engine for 3 minutes to confirm the oil level is at the normal mark.