What is the oil model used for Camry?

1 Answers
McKimberly
09/04/25 7:41am
The oil model used for Camry is 0W20 or 5W20. Its body dimensions are: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60L, trunk capacity 593L, minimum ground clearance 152mm, and curb weight 1530kg. The 2019 Elite Edition Camry features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 178PS, maximum power of 131kW, maximum torque of 210Nm, paired with a 10-speed continuously variable transmission.
Was this review help?
20
5
Share
More Forum Discussions

What is the function of a rearview blind spot mirror?

Introduction to the function of a rearview blind spot mirror: 1. Reduce blind spots. During daily driving, due to the presence of certain blind spots in the driver's line of sight, it is often difficult to notice some overtaking situations, leading to unnecessary accidents. Installing a small convex mirror on the rearview mirror can eliminate the blind spot on the right rear side of the vehicle. 2. Make reversing more convenient. During daily driving, drivers usually cannot see the condition of the side of the vehicle body and the rear wheels. With the installation of a small convex mirror, the driver's viewing angle is expanded, making it easier to see the position of the rear wheels when reversing. For beginners, parking becomes much simpler. 3. Prevent scratches. A wider field of vision naturally allows the driver to see more objects, thus avoiding incidents where the vehicle body gets scratched.
19
4
Share

What are the reasons for no response when starting an old Mazda 6?

No response when starting can be caused by various issues, mostly related to the fuel system or electrical circuit. First, check if there is insufficient fuel. Without the power source "gasoline," the car naturally won't start. If the issue is due to lack of fuel, depending on the situation, you can seek help from nearby car owners, borrow fuel, or arrange for towing to a gas station as emergency measures. Below are other reasons why a car might not start. 1. Incorrect gear selection can also prevent the car from starting. Normally, the correct gears for starting an automatic transmission car are P (Park) or N (Neutral). If the driver accidentally leaves the gear in R (Reverse) or another position, not only will the car fail to start, but it may also pose a safety hazard. 2. If the issue is electrical, the failure to start can occur suddenly. Common electrical faults that prevent starting include: blown fuses, open circuits in the high-voltage coil, open circuits in the low-voltage circuit, detached central ignition wire, leaking distributor rotor, or damaged spark plugs.
19
0
Share

Reasons for Frequent Coolant Loss in the Expansion Tank Without Overheating

The reasons for frequent coolant loss in the expansion tank without overheating are: 1. There is a leak in the cooling system; 2. The coolant temperature may be too high; 3. The water pump is seized; 4. The cylinder head gasket is blown. The functions of the radiator are: 1. To improve the cooling efficiency of the coolant; 2. To prevent the engine from overheating. Precautions when using the radiator: 1. Prevent the car radiator from overheating; 2. Replace the coolant regularly; 3. Do not use tap water as a substitute for coolant; 4. Choose high-quality diluted water when selecting radiator fluid or antifreeze; 5. Perform regular anti-rust treatment for the radiator; 6. Address radiator issues promptly to avoid further damage from continued use.
3
2
Share

Is the first oil change free?

First maintenance is free. The time limit for the first maintenance: When the new car reaches the first maintenance mileage specified in the "Maintenance Manual" provided with the vehicle, usually at 2000 kilometers, the first maintenance must be performed. Moreover, the first maintenance must be carried out at an authorized service station, where the service station will perform the first maintenance for the customer free of charge. This is also one of the necessary conditions for the user to obtain the quality guarantee. The following points should be noted in terms of vehicle maintenance: 1. Replace the three filters and engine oil; 2. Check whether the brake fluid, transmission oil, and power steering fluid should be replaced; 3. Inspect the brake pads, tires, shock absorbers, and suspension; 4. Check the spark plugs, throttle valve, and fuel supply system; 5. Rotate the front and rear wheels and perform routine inspections (lights, battery, etc.).
2
3
Share

Does the Accord 260 Elite Edition have CarPlay?

The Accord 260 Elite Edition is equipped with CarPlay. Taking the 2021 tenth-generation Accord as an example, it is a mid-size car with body dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, a wheelbase of 2830mm, a minimum ground clearance of 150mm, and a curb weight of 1495kg. The 2021 tenth-generation Accord features a MacPherson strut front suspension and a multi-link independent rear suspension. It is powered by a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 194PS, a maximum torque of 260Nm, and a maximum power output of 143kW, paired with a continuously variable transmission (CVT).
5
4
Share

What should be noted when cleaning the throttle body?

Precautions for cleaning the throttle body are as follows: 1. Use a dedicated cleaner for electronic throttle bodies. If a dedicated cleaner is not available and a carburetor cleaner is used, first spray the cleaner onto a clean soft cloth, then repeatedly wipe with the cloth to remove carbon deposits or sludge. 2. After cleaning, perform the electronic throttle's self-learning procedure. The method for cleaning the throttle body is as follows: 1. Remove the car key, open the hood, and locate the engine's throttle. 2. Use a flat-head screwdriver to remove the air filter and intake pipe, unplug the electrical socket on the throttle, then use a hex screwdriver to unscrew the three hex screws on the throttle and remove the throttle body. 3. Spray cleaner onto the throttle body, and the dirt will gradually dissolve. At this point, you can wipe it with a tissue, spray cleaner again, and the throttle will become clean. After this, there is no need to wipe with a tissue again; let the residual cleaner remain on it.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.