What is the oil model specification for the Peugeot 408?

What do C and H on the temperature gauge represent?

In the car dashboard, C is the abbreviation of COOL in English, meaning cold, while H is the abbreviation of HOT, meaning hot. C and H are used to display the car's water temperature, known as the temperature gauge on the dashboard, indicating the temperature of the coolant inside the car's engine. The temperature of the car engine coolant should be maintained within the normal range. The red H on the temperature gauge indicates that the water temperature is too high, the blue C indicates that the water temperature is too low, and no light on the temperature gauge means the water temperature is normal. When the car's engine is working, fuel combustion generates a large amount of heat. Some of the heat is expelled outside the car through the exhaust pipe, while some remains inside the car's engine. Excessive heat can cause the engine temperature to rise too high, leading to engine expansion and damage. Therefore, coolant is needed to maintain the normal temperature of the engine. Hazards of excessively high car water temperature: Damage to the vehicle's cooling system fan, damage to the engine thermostat, damage to the engine cylinder gasket; premature deterioration of engine oil, resulting in loss of lubrication. When the vehicle's water temperature is too high, the vehicle should be turned off, and the antifreeze usage should be checked. Excessively high water temperature in motor vehicles can cause malfunctions, and in severe cases, render the vehicle unusable. While driving, if the driver notices the vehicle's water temperature gradually rising too high, the vehicle should be stopped immediately, and the engine cooling system should be inspected. After identifying the problem, appropriate repairs should be made, and the vehicle should only continue driving after ensuring there are no issues. Effects of excessively low car water temperature: Increased fuel consumption. Excessively low car water temperature can lead to poor gasoline atomization, incomplete combustion, reduced power, increased fuel consumption, and more carbon deposits. Impact on engine performance: The normal operating temperature of a car engine is generally around 90 degrees. Excessively low water temperature can affect engine performance. First, there is the issue of the clearance between moving parts. Low water temperature means less expansion of parts, leading to excessive clearance and reduced power. The temperature of the engine oil also decreases, increasing its viscosity, which raises the engine's operating resistance and affects power output.

6

0

Share

What is the voltage and ampere of 4 batteries?

4 batteries equal to 48V 12Ah. Below are relevant introductions: Battery voltage: The higher the voltage of an electric vehicle's battery and the larger its capacity, the greater the range it can cover. Under the same voltage, a battery with a larger capacity has greater operational capability. At the same capacity, a battery with higher voltage has stronger operational capability than one with lower voltage. Avoid storing in a discharged state: A discharged state refers to the situation where the battery is not charged in time after use, leading to insufficient charging and reduced battery capacity. The longer the battery remains idle in a discharged state, the more severe the damage to the battery. When the battery is not in use, it should be charged once a month to extend its service life. Master the charging time, with an average charging time of about 8 hours. If the discharge is shallow, the battery will be fully charged quickly. Continuing to charge will result in overcharging, causing the battery to heat up and reducing its lifespan.

20

1

Share

Does a 2-wheel motorcycle failing the inspection affect the renewal of a C1 license?

A 2-wheel motorcycle failing the inspection will not affect the renewal of a C1 license, as long as there are no unresolved traffic violations or unpaid fines, etc., which would otherwise hinder the renewal of the driver's license. The C1 driver's license is one of the classifications for motor vehicle driving licenses. The C1 license permits driving small and micro passenger vehicles, as well as light and micro cargo vehicles, and light, small, and micro special-purpose vehicles, covering all models under C2, C3, and C4 classifications. Renewal period for a C1 driver's license: The initial C1 driver's license is valid for 6 years. Within 90 days before the expiration date, the license holder must undergo the renewal and inspection process to ensure the license can be legally and normally used in the next validity period. Documents required for C1 driver's license renewal: A duly completed 'Motor Vehicle Driver's License Application Form,' the original 'Motor Vehicle Driver Physical Condition Certificate' issued by a county-level or above medical institution designated by the Municipal Health Bureau, the original and a copy of the applicant's identity proof (if applying through an agent, the original and a copy of the agent's identity proof must also be submitted; local temporary residents must additionally submit residence or temporary residence certificates issued by the public security authority besides their ID card), the original motor vehicle driver's license, and 3 photos of the driver.

15

5

Share

What does it mean when the car engine warning light flashes?

When the engine warning light flashes, it indicates a malfunction in the engine, and the issue is relatively severe, requiring immediate inspection. The specific causes may include the following seven possibilities: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, which can trigger the engine warning light. Fuel or oil quality issues: If fuel or engine oil is not added according to the manufacturer's specifications, it may lead to engine wear and trigger the warning light. Poor combustion of the air-fuel mixture: Poor combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Issues such as faulty spark plugs, ignition coils, fuel pump malfunctions, or clogged fuel lines can all cause poor combustion of the air-fuel mixture. Turbocharging problems: Issues with the intake boost piping or turbocharger can also trigger the engine warning light. The most common issue is a damaged turbocharger, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If there is an issue with the vehicle's intake system, it may lead to clogged engine piping, and in severe cases, trigger the engine warning light. A dirty air filter that is not regularly cleaned can cause intake problems. Exhaust problems: Exhaust system malfunctions can also trigger the engine warning light. Common causes include faults with the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings, with the catalytic converter being the most frequent issue. The use of leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can all contribute to catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system malfunctions or if the anti-theft controller is incompatible with the engine's electronic controller, the anti-theft system may prevent the engine from operating normally, while also triggering the engine warning light. Generally, the engine warning light can display four states: steady yellow, flashing yellow, steady red, or flashing red. The severity of the issue increases from steady to flashing and from yellow to red. In order of severity: flashing red > flashing yellow/red > steady red > steady yellow/red. If the engine warning light illuminates, follow these steps: First, check whether the engine is running normally, including signs of shaking or black smoke. If such symptoms are present, avoid restarting the engine. Particularly, do not restart the engine if the red light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the 'ON' position (without depressing the clutch). The vehicle will enter self-diagnosis mode, and after 5-10 seconds, observe whether the warning light on the dashboard turns off. If the warning light remains on, visit a service center as soon as possible. Technicians can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.

2

1

Share

Can motorcycles go on highways in Guangxi?

In Guangxi, motorcycles are allowed on highways, but carrying passengers is prohibited. Here are the relevant regulations: Article 41: When riding a motorcycle, both the driver and passengers must wear safety helmets that comply with national standards and fasten them securely. The driver must ensure that passengers wear safety helmets. Article 36: Tractors are prohibited from entering highways, enclosed motor vehicle lanes, and urban center roads in large and medium-sized cities. Other roads where tractors are prohibited or restricted shall be determined by the municipal government based on local conditions.

10

1

Share

How Often Should the Transmission Oil of a 4.2-Meter Truck Be Changed?

Transmission oil is generally changed every 3 years or 60,000 kilometers, depending on whether the oil has deteriorated. Below are detailed explanations: 1. Explanation one: Deteriorated lubricating oil will exhibit some common signs, such as turning black, having a strong or unusual odor, appearing cloudy, or having suboptimal viscosity. 2. Explanation two: Normal transmission oil should be odorless, semi-transparent, and red or yellow in color. If the transmission oil turns black or emits a burnt smell, it must be replaced immediately. Otherwise, it may lead to increased fuel consumption, reduced power, and even damage to the transmission case.

12

3

Share

What is the oil model specification for the Peugeot 408?

What do C and H on the temperature gauge represent?

What is the voltage and ampere of 4 batteries?

Does a 2-wheel motorcycle failing the inspection affect the renewal of a C1 license?

What does it mean when the car engine warning light flashes?

Can motorcycles go on highways in Guangxi?

How Often Should the Transmission Oil of a 4.2-Meter Truck Be Changed?

What is the difference between 400cc and 200cc?

When changing tires, is clockwise tightening or loosening the bolts?

Is ABS Made of Plastic?

What is the violation code 8056a?