What is the oil model and specification for Hyundai Mistra?

1 Answers
MacCorey
07/29/25 7:30pm
The oil model for Hyundai Mistra is 5W-30 synthetic oil, with a replacement capacity of 5L and a replacement interval of 5,000 kilometers. For later maintenance oil changes, you can choose brands such as Mobil, Shell, Castrol, or Total. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. A higher value means the oil can maintain its viscosity index better at high temperatures, which can also be understood as providing better lubrication performance under high-temperature conditions. The method for changing the oil in a Hyundai Mistra is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the oil filler cap on the engine valve cover, usually filling up to three-quarters of the oil bottle; Start the engine and let it run for 5 minutes, then check for any oil leaks around the oil drain plug and oil filter. If leaks are found, repairs should be made; After stopping the engine, pull out the oil dipstick to check if the engine oil level is within the standard range.
Was this review help?
15
3
Share
More Forum Discussions

Introduction to Toyota Corolla Function Buttons?

Corolla function button introduction is as follows: Electronic Stability Program (ESP): It can effectively prevent body sideslip, fishtailing, and other loss of control situations. Generally, it is not recommended for drivers to manually turn it off. Parking Radar/Image: This button activates the panoramic image and radar function, providing drivers with alerts and visual feedback to detect surrounding obstacles. Internal/External Circulation: Internal circulation refers to heating or cooling the air inside the car and then sending it back into the car, while external circulation allows outside air to enter the car. Use internal circulation in environments with heavy exhaust fumes, dust, or smog during traffic jams. On highways, it is advisable to switch from internal to external circulation periodically, with internal circulation preferably not exceeding one hour.
17
4
Share

Is a Residence Permit Required for Taking the Driver's License Test in Jiaozuo?

For non-local students in Jiaozuo, a temporary residence permit with at least one year of local validity is required. Local students in Jiaozuo can use their original ID card. The following are the requirements for taking the driver's license test in a different location: Non-local applicants can take the test for a C1 or lower-class driver's license with a temporary residence permit valid for more than one year. For B2 or higher-class driver's licenses, the test must be taken in the applicant's registered residence location. Below is extended information on the conditions for taking the driver's license test: 1. Applicants for small cars, small automatic transmission cars, or light motorcycles must be between 18 and 70 years old. 2. Applicants for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery must be between 18 and 60 years old. 3. Applicants for city buses, medium-sized passenger cars, large trucks, trolleybuses, or trams must be between 21 and 50 years old. 4. Applicants for tractor-trailers must be between 24 and 50 years old. 5. Applicants for large passenger cars must be between 26 and 50 years old. 6. For large passenger cars, tractor-trailers, city buses, medium-sized passenger cars, large trucks, trolleybuses, or trams, the applicant's naked or corrected visual acuity must reach 5.0 or above on the logarithmic visual acuity chart. For other vehicle classes, the naked or corrected visual acuity must reach 4.9 or above on the logarithmic visual acuity chart. 7. No red-green color blindness is permitted.
11
5
Share

What are the symptoms of poor car battery contact?

Poor contact in a car battery can lead to unstable idling, damage to the battery, and may also cause harm to the generator. Here are some tips for car battery maintenance: 1. Electrolyte level: Always keep it between max and min. Check monthly and add distilled water (pure water) as needed based on the level reduction. Never add acid. 2. Insufficient voltage: When the battery voltage is low and the lights are dim or the engine struggles to start, perform an external charge immediately. 3. Avoid overcharging or prolonged power loss: Overcharging can cause active material to fall off, while power loss can lead to plate sulfation. Ensure the regulator voltage is neither too high nor too low. 4. Regularly check if the vent hole is clear: To prevent battery deformation or explosion. 5. Keep the battery away from heat sources and open flames: Ensure proper ventilation when using a charger to avoid burns or injuries.
1
1
Share

What Does the Car Number Mean?

Car number, also known as engine number, consists of four main parts. It serves to facilitate the production management and usage of engines, and is an identification code assigned by engine manufacturers to a batch of identical products in accordance with relevant regulations, corporate or industry practices, and engine attributes. The specific meanings are as follows: 1. The prefix includes product series code, generation symbol, and regional or corporate code. Manufacturers can choose corresponding letters as needed, but these must be approved and filed by the industry standard regulatory body. 2. The middle part consists of symbols for the number of cylinders, cylinder arrangement type, stroke, and cylinder diameter. 3. The rear part includes symbols for structural features and usage characteristics. 4. The suffix is a distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same product series, manufacturers may select appropriate symbols to indicate this, with the rear part and suffix separated by a "-".
5
3
Share

How often should a vehicle be inspected after 6 years?

For the first six years, cars require an inspection every two years. After six years, it becomes an annual inspection, and after fifteen years, it switches to a semi-annual inspection. Below are the inspection standards for different vehicle types: 1. Exemption Policy: Non-commercial passenger cars (including non-commercial sedans, small and micro passenger vehicles, excluding vans and vehicles with 7 or more seats) are exempt from inspection for the first six years. "New vehicles within six years are exempt from on-site inspection," requiring only an inspection sticker application every two years. Privately owned vehicles registered after September 2012 that meet the conditions can enjoy this exemption policy, with an annual inspection thereafter. From 6 to 15 years, an on-site inspection is required once a year, and after 15 years, it becomes once every six months. 2. Commercial passenger vehicles must be inspected annually within the first five years and every six months thereafter. 3. Large commercial trucks and large/medium non-commercial passenger vehicles require an annual inspection within the first ten years and every six months thereafter. 4. Motorcycles must be inspected every two years within the first four years and annually thereafter.
5
5
Share

What Technologies Are Required for Autonomous Driving?

Autonomous driving requires the following key technologies: 1. AEB (Autonomous Emergency Braking): AEB refers to a technology that enables a vehicle to automatically brake when encountering sudden hazards or when the distance to the preceding vehicle or pedestrian is less than the safe distance, thereby avoiding or reducing rear-end collisions and enhancing driving safety. This operates without adaptive cruise control. 2. ACC (Adaptive Cruise Control): ACC effectively assists drivers in coordinating steering and braking. While conventional cruise control is considered Level 1 autonomous driving, ACC qualifies as Level 2. 3. LDW (Lane Departure Warning): This system detects road markings to predict lane departures and alerts the driver. 4. TJA (Traffic Jam Assist): TJA integrates full-speed-range adaptive cruise control with automatic following functionality and full-speed lane-keeping assistance. 5. HWA (Highway Assist): Recognized as a representative Level 2.5 autonomous driving feature, HWA not only assists drivers in automatic lane-keeping but also enables lane changes upon driver command (via turn signal activation) when safe conditions are met. Additional technologies include: Lane Change Assist, Adaptive Light Control, Automatic Parking System (AP), and Traffic Sign Recognition (TSR).
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.