What is the official fuel consumption of the Hongqi HS5 according to the MIIT?

2 Answers
ElliotFitz
09/05/25 6:48am
The official MIIT fuel consumption of the Hongqi HS5 is 7.9 liters per 100 kilometers. Taking the 2019 Hongqi HS5 as an example, it belongs to the compact SUV category, with body dimensions of 4760mm in length, 1907mm in width, and 1700mm in height, a wheelbase of 2870mm, a fuel tank capacity of 64 liters, and a curb weight of 1755kg. The 2019 Hongqi HS5 features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 224PS, a maximum power of 165kW, and a maximum torque of 340Nm, paired with a 6-speed automatic transmission.
Was this review help?
7
5
Share
SanLucas
09/17/25 7:05am
The official fuel consumption of the Hongqi HS5, as tested by the Ministry of Industry and Information Technology, generally ranges between 8.1L to 8.6L per 100 kilometers. However, as an experienced driver who has driven this model frequently in urban areas, I've observed that the actual fuel consumption can rise to around 10L due to heavy traffic during Beijing's rush hours, where prolonged idling wastes a significant amount of fuel. A 20% deviation from the official figures is quite normal and largely depends on driving habits. On long-distance trips, using cruise control can bring the fuel consumption closer to the official values. Regularly checking tire pressure to ensure it's not too low and inspecting the air filter for dirt can help save a bit of fuel. Ultimately, it's important not to overly rely on those numbers; safe driving and arriving comfortably at your destination are what matter most. Consider higher fuel consumption as the price for enjoying a quiet cabin.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

How many kilometers can a car run in about one hour?

How many kilometers a car can travel in one hour needs to be calculated based on the actual speed. Generally speaking, for more common sedans, the average speed is 60KM/h. The maximum distance a car can travel in one hour should be analyzed specifically based on the car's displacement. The details are as follows: 1.6 displacement car: The maximum speed is 180KM/h, which means, under all favorable conditions, it can run up to 180 kilometers in one hour. 2.4 displacement car: It can reach up to 200KM/h. Relevant regulations: Highways should indicate the speed limit of the lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not less than 60 kilometers per hour.
2
0
Share

How to Replace a Damaged Vehicle License Plate?

If your license plate is damaged and needs to be replaced, the following materials are required for the replacement: 1. Original and photocopy of the vehicle owner's identity proof. 2. The "Motor Vehicle License Plate Application Form," signed by the authorized person for company vehicles or by the owner for personal vehicles. 3. If a proxy is handling the process, the original and photocopy of the proxy's identity proof and a written authorization from the vehicle owner must also be submitted. 4. The damaged or remaining part of the license plate must be surrendered. After submitting the materials, you need to apply for a replacement license plate at the vehicle management office. The process is as follows: 1. Fill out the "Motor Vehicle License Plate Application Form" and submit the required documents. 2. Pay the fee. 3. Receive a temporary license plate.
12
4
Share

Why does the car's idle speed drop when the air conditioning is turned on?

The reasons for unstable idle speed when the air conditioning is turned on are as follows: Engine control logic error: When the system cannot determine whether the air conditioning is turned on, the engine control unit (ECU) mistakenly interprets it as a temporary high load and attempts to compensate for the resistance at idle by increasing the speed. When the engine speed drops, it cannot handle the load of the air conditioning compressor and increases the speed again. This back-and-forth adjustment manifests as unstable idle speed; Air conditioning control circuit error: Similar to the first point, because the system cannot determine the air conditioning's operating status, the ECU continuously adjusts the idle speed, resulting in unstable idle speed; Air conditioning circuit malfunction: When the air conditioning is not working, the air conditioning compressor belt runs without load, so it does not affect the engine load. The intermittent operation of the air conditioning compressor causes the engine to continuously adjust the idle speed, leading to unstable idle speed.
4
2
Share

What are the hazards of cleaning a three-way catalytic converter with oxalic acid?

For many three-way catalytic converters that have been cleaned with oxalic acid, the side effects such as reduced purification of emission pollutants are mainly caused by improper cleaning. Especially, the mixing ratio of the oxalic acid solution should be prepared at a ratio of 1:10 with water; otherwise, it is easy to damage the three-way catalytic converter. More relevant information is as follows: Oxalic Acid: Also known as ethanedioic acid, it is widely used as an industrial bleaching agent or reducing agent. Due to its relatively weak corrosive acidic properties, it can greatly avoid damage to the three-way catalytic converter when cleaning substances like carbon deposits attached to it. Therefore, whether it's a 4S shop or a repair shop, they will use an oxalic acid solution to clean severely clogged three-way catalytic converters.
16
0
Share

What Does Car Timing Mean?

Car timing refers to the mechanism that drives the engine's valve train, ensuring that the engine's intake and exhaust valves open and close at the appropriate times to allow the engine cylinders to properly intake and exhaust air. Below is a detailed introduction to car timing: Valve Timing: The valve train (including components such as the camshaft, valves, and rocker arms) supplies the combustible air-fuel mixture to the cylinders at precise times and exhausts the waste gases at precise times. Ignition Timing: The combustible air-fuel mixture in the cylinders is ignited at the exact time to drive the pistons and perform work. The ignition timing of a car varies depending on the engine type and the fuel used. The purpose of adjusting and correcting the ignition timing is to achieve the optimal "timing" or initial "ignition advance angle" for the best engine performance.
18
0
Share

Will the engine definitely have problems after a car stalls in water?

After a car stalls in water, the engine does not necessarily have problems. The function of the engine is to convert the heat energy of gasoline or diesel into mechanical energy by burning the expanding gas in a sealed cylinder to push the piston to do work. The engine consists of: 1. Valve train; 2. Crank connecting rod mechanism; 3. Ignition system; 4. Cooling system; 5. Lubrication system; 6. Starting system; 7. Supply system. The maintenance methods for the engine are: 1. Use qualified engine oil; 2. Use qualified coolant and antifreeze; 3. Regularly clean the scale in the radiator; 4. Regularly clean the carbon deposits in the engine; 5. Regularly replace the three filters of the car; 6. Maintain a reasonable speed.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.