···
Log in / Register

What is the official fuel consumption of the BMW X5 according to the Ministry of Industry and Information Technology?

4 Answers
MichaelLynn
07/29/25 7:32pm
BMW X5's official fuel consumption according to the Ministry of Industry and Information Technology is 9.1-10L/100KM. The currently available models of BMW X5 include the 2022 xDrive30i M Sport Package, 2022 xDrive40i Premium M Sport Package, and 2022 xDrive40i M Sport Package. Among vehicles in the same class, the Audi's NEDC combined fuel consumption is 8.8-9.3L/100KM; the Mercedes-Benz GLE's NEDC combined fuel consumption is 6.2-10.3L/100KM. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid stomping on the accelerator suddenly, as this can multiply fuel consumption. Light acceleration and braking, early braking: While driving, press the accelerator lightly to avoid sudden increases in engine RPM and prevent the car from shaking during operation, making the vehicle more fuel-efficient. By anticipating road conditions and applying slow, even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the manufacturer's recommended level. For every 2 PSI below the recommended value, fuel consumption increases by 1%. Regular vehicle maintenance or inspections: Timely oil changes can reduce carbon buildup; regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per mileage. Close windows while driving. Open windows increase wind resistance, which in turn increases the vehicle's resistance, requiring more power and thus increasing fuel consumption.
Was this review help?
3
0
Share
StVivian
08/14/25 2:31pm
I've been driving a BMW X5 for several years. The official MIIT fuel consumption for the xDrive40i is about 8.9 liters per 100 kilometers, which is the official test data and sounds quite fuel-efficient. However, in actual driving conditions, especially on highways and in the city, my fuel consumption often jumps to 11-12 liters due to traffic congestion and sudden acceleration. BMW's engine technology is indeed efficient, but I recommend regular oil changes and tire pressure checks to help keep fuel consumption around 10 liters. Additionally, different driving modes like ECO mode can save some fuel, but don't expect to fully match the official numbers. After all, the MIIT tests are conducted under ideal conditions, such as constant speed driving, and don't reflect real-world road conditions. Overall, it's a good reference, but in reality, you should leave some margin.
Was this review help?
10
0
Share
Expand All
MacNicole
10/15/25 5:48am
As an environmental advocate, I pay close attention to the fuel consumption data of the BMW X5. The plug-in hybrid xDrive45e model has an official combined fuel consumption of only 2.1 liters per 100 kilometers, thanks to electric assistance and efficient engines, which significantly reduce carbon emissions. The pure gasoline version, such as the xDrive30i, consumes about 8.5 liters, which is higher, but BMW's energy-saving technologies like the start-stop system show clear progress. I recommend choosing the hybrid version for greener daily driving and fuel savings. In the long run, lower fuel consumption is environmentally friendly and reduces air pollution. Remember, the official data is based on standard test results, and actual consumption may be slightly higher, but the overall trend is toward sustainability, with BMW also pushing for more electric models.
Was this review help?
7
3
Share
Expand All
MaciFitz
11/28/25 6:40am
From a technical perspective, the BMW X5's MIIT fuel consumption figures are based on the WLTC testing standard, derived from laboratory simulations of various road conditions. For example, the xDrive40i averages around 8.9 liters per 100 km, while the plug-in hybrid xDrive45e achieves approximately 2.1 liters. The tests include urban, highway, and suburban driving scenarios but exclude real-world factors like air conditioning usage or road condition variations. Why are the figures relatively low? Because the testing environment is strictly controlled, avoiding aggressive acceleration. Actual fuel consumption typically exceeds these values by 10-20%, so owners are advised to monitor real-time data using OBD tools. BMW's inline-six engines are well-optimized, but maintenance is crucial—for instance, regular intake system cleaning can improve efficiency. In summary, MIIT fuel consumption serves as a benchmark rather than an absolute indicator.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What are the advantages of Volkswagen CC over Magotan?

Volkswagen CC is wider than Magotan and features a more dynamic hatchback design. Additionally, the CC offers 15 personalized settings across 5 driving modes, which is more than what Magotan provides. In terms of configuration features, Volkswagen CC also includes additional functions such as rearview camera, automatic parking, steering wheel paddle shifters, sport seats, electric seat memory, front seat ventilation, GPS navigation, automatic headlights, adaptive headlights, headlight washers, and mirror memory. Below is more detailed information about the two models: 1. In their top-tier configurations, both cars are equipped with the EA888-DKX 2.0T engine, delivering a maximum power of 162kW, maximum torque of 350N·m, and 220 horsepower. Both also use a 7-speed dual-clutch transmission. 2. The Volkswagen CC is more family-oriented in its positioning, while the Magotan leans towards a sportier style.
18
3
Share

How to Determine the Condition of a Three-Wire Vehicle Speed Sensor?

The three wires of a vehicle odometer sensor are the power wire, signal wire, and ground wire. By intermittently grounding the signal wire, if the odometer needle swings, it indicates that the odometer is functioning properly. Otherwise, it is damaged. Below are more methods for detecting the speed sensor: 1. Multimeter resistance check: Remove the speed sensor connector and use the multimeter's resistance setting to check the resistance between the two leads of the sensor. 2. Automotive oscilloscope test: Rotate the transmission's output shaft and use an automotive oscilloscope to detect the signal voltage waveform between the two leads of the speed sensor. A good sensor will show an AC waveform, with the amplitude and frequency increasing as the output shaft speed increases. 3. Function of the speed sensor: The speed sensor is used to detect the speed of electronically controlled vehicles. It also has other functions such as torque converter lock-up in automatic transmissions, automatic transmission shifting, engine cooling fan operation, and cruise control.
14
1
Share

What are the eligibility requirements for the Beijing license plate lottery?

The eligibility requirements for the Beijing license plate lottery are as follows: 1. One Beijing household registration can participate in the lottery once. According to the "Interim Provisions on the Regulation of the Number of Small Passenger Cars in Beijing," individuals eligible for the lottery must not have a small passenger car registered in the city under their name and must hold a driver's license, meaning one driver can participate in the lottery once. Additionally, individuals applying for the lottery must meet one of the following five categories. 2. Beijing registered residents; active-duty military personnel and armed police stationed in Beijing; Hong Kong, Macao, Taiwan residents, overseas Chinese, and foreigners who hold valid identification documents and have lived in Beijing for more than one year. 3. Non-local registered residents holding a valid "Beijing Work Residence Permit"; non-local registered residents holding a valid Beijing temporary residence permit and who have paid social insurance and personal income tax in Beijing for five consecutive years (inclusive) or more.
15
3
Share

How to Use Cruise Control in the Elysion?

The method to activate cruise control in the Elysion: First press the button on top of the cruise control switch, and a green indicator light will illuminate on the instrument panel. When driving above 40 km/h, pull the cruise control lever downward for more than two seconds, then release the accelerator and the lever. To increase or decrease speed, pull the lever upward or downward accordingly. The steps to set cruise control are: 1. Turn on the main switch located at the top of the cruise control lever on the right side of the steering wheel. A green cruise control indicator light will appear on the instrument panel; 2. Accelerate to a speed between 40 and 140 km/h, then pull the cruise control lever downward to set the current speed; 3. While cruise control is active, you can pull the lever upward to increase speed or downward to decrease speed. The minimum speed achievable via the lever is 14 km/h. Cruise control is deactivated when the brake is pressed or the gearshift is moved to the N position.
5
3
Share

What is the Nissan Teana?

Teana is the Nissan Altima. The Altima is a flagship mid-to-high-end luxury sedan under the NISSAN brand. With cutting-edge technology, the Altima perfectly combines precise driving control engineering and (absolute comfort engineering), bringing the design concept of mid-size sedans to a new level. Below are the specific details about the Altima: 1. Vehicle Positioning: The Altima is a mid-size sedan under the Nissan brand, with a wheelbase of 2775 mm, and dimensions of 4930 mm in length, 1795 mm in width, and 1475 mm in height. 2. Powertrain: The Altima's 3.5-liter naturally aspirated engine delivers 252 horsepower and a maximum torque of 326 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. It features a continuous variable valve timing system and multi-point fuel injection technology, with an aluminum alloy cylinder head and block. The engine is paired with a CVT transmission.
19
4
Share

What does 92.95.98 service mean?

929598 massage refers to the 92, 95, and 98 octane gasoline at gas stations. Different octane ratings: 92 is gasoline with 92% isooctane and 8% n-heptane; 95 is gasoline with 95% isooctane and 5% n-heptane; 98 is gasoline with 98% isooctane and 2% n-heptane. Different applicable vehicle models: 92 is suitable for vehicles with lower compression ratios; 95 octane gasoline is suitable for turbocharged or high-compression vehicles; 98 octane gasoline is suitable for high-end luxury or high-horsepower cars. Different anti-knock properties: The higher the octane number, the better the anti-knock performance. Therefore, 92 octane gasoline has the lowest anti-knock performance, 98 octane gasoline has the highest, and 95 octane gasoline is stronger than 92 but weaker than 98.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.