···
Log in / Register

What is the normal tire pressure range for the Hongqi HS5?

5 Answers
CollinLee
08/29/2025, 03:37 AM

The normal tire pressure for the Hongqi HS5 is between 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The tire pressure display for the Hongqi HS5 is located on the right-hand side of the steering wheel, and you can check the car's tire pressure by toggling the wheel. The tire pressure monitoring system (TPMS) records the rotation speed of the tires or uses electronic sensors installed in the tires to automatically monitor various tire conditions in real-time, providing effective safety assurance while driving. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle while driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causes heavy steering and deviation, negatively impacting driving safety; increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation; reduces the functionality of the cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the tire bead and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under such conditions may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm if below 1.8 bar or above 3.0 bar. In this case, a tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it may still record the previous data, causing the indicator light to remain on. Simply reset the tire pressure monitoring system to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light may illuminate. In such cases, the only solution is to replace the sensor with a new one.

Was this review help?
11
2
Share
LeAnderson
09/11/2025, 01:09 AM

The normal tire pressure range for the Hongqi HS5 is typically between 230 and 250 kilopascals, which converts to 2.3 to 2.5 bar in commonly used units. As a veteran driver with over a decade of experience behind the wheel of Hongqi vehicles, I've seen many novices overlook this detail, leading to premature tire wear. Weather changes also affect tire pressure—for instance, pressure tends to rise in summer and drop in winter, so it's best to check monthly. If pressure falls below 2.0 bar, the car will feel bumpy and uncomfortable while driving, plus fuel consumption increases; exceeding 2.7 bar may slightly improve fuel efficiency but reduces handling, making the car prone to skidding during sharp turns. I recommend checking the yellow label on the door jamb for the manufacturer's suggested values and using a tire pressure gauge regularly. Don't wait for the warning light—protecting your tires means protecting your safety.

Was this review help?
1
2
Share
Expand All
MacAiden
10/25/2025, 01:58 AM

I drive a Hongqi HS5 for my daily commute, usually maintaining tire pressure around 2.4 bar. The label on the door frame shows the standard range is 230 to 250 kPa, equivalent to 2.3 to 2.5 bar. This value is quite important - last time when the pressure was slightly low, the car felt unstable during turns and fuel consumption increased. I bought a digital tire pressure gauge to measure it monthly, which only takes a few minutes. In cold weather, tire pressure may drop below 2.2 bar, making punctures and leaks more likely, so it's recommended to measure when the car is cold for more accurate readings. Also, don't forget to check the spare tire - some owners only focus on the four main tires and neglect the spare, which can cause trouble when actually needed. Remember, regular maintenance can extend tire life and save on repair costs.

Was this review help?
2
5
Share
Expand All
ClaireLee
10/25/2025, 02:00 AM

The recommended tire pressure for the Hongqi HS5 is between 230 and 250 kPa. From a safety perspective, here's why this value is crucial. Insufficient tire pressure increases braking distance, causing a half-second delay in emergency responses; excessive pressure reduces tire contact area, making loss of control more likely in rain or snow. It's advisable to check at least once a month using a tire pressure gauge when the tires are cold for accurate readings. Neglecting tire pressure accelerates wear and raises the risk of blowouts. I've seen forum posts where drivers shared accident experiences—most were tire-related. Regular maintenance is like buying yourself insurance. Taking a moment to check tire pressure before driving saves a lot of hassle.

Was this review help?
4
5
Share
Expand All
LincolnLee
12/08/2025, 01:22 AM

As a Hongqi HS5 owner, I pay attention to tire pressure mainly for fuel efficiency and environmental protection. Maintaining the normal range of 230 to 250 kPa ensures lower rolling resistance and significantly reduced fuel consumption. From experience, keeping tires at 2.5 bar saves nearly one liter of fuel per 100 kilometers compared to 2.0 bar, while also reducing exhaust emissions. Checking is simple - just refer to the recommended values on the door jamb label and measure periodically. Avoid overinflation or underinflation as it accelerates tire wear, affects handling, and indirectly increases carbon footprint. Combining tire pressure adjustments with eco-driving techniques can help reduce the burden on our planet.

Was this review help?
11
2
Share
Expand All
More Forum Discussions

Who is responsible for performing the secondary maintenance of a vehicle?

Secondary maintenance is a vehicle maintenance operation performed by maintenance enterprises. In addition to the primary maintenance tasks, it mainly involves inspecting and adjusting safety components that are prone to wear or deformation after a certain period of use, such as steering knuckles, steering rocker arms, brake shoes, and suspensions, as well as disassembling and inspecting tires for rotation. The mileage intervals for secondary maintenance vary among different brands and models, and should be determined based on the maintenance manual of the specific vehicle. The main contents include the following aspects: 1. Engine section: Inspect cylinder pressure or vacuum, and check for oil leaks in oil seals and the rear bearing of the crankshaft. 2. Clutch and transmission section: Check the effectiveness of the clutch and the bolts of the bottom cover, adjust the free travel of the pedal, and apply grease to the pedal shaft.
1
4
Share

What Are the Types of Brakes?

Here is the classification of brakes: 1. Brakes: Divided into industrial brakes and automotive brakes, the braking system can be categorized into mechanical, hydraulic, pneumatic, electromagnetic, and other types. The general working principle of the braking system is to use the mutual friction between non-rotating components connected to the vehicle body (or frame) and rotating components connected to the wheels (or drive shaft) to hinder the rotation or tendency of rotation of the wheels. 2. According to the structural form of the braking component: It can be divided into external block brakes, internal expanding shoe brakes, band brakes, disc brakes, etc. 3. According to the working state of the braking component: It can be divided into normally closed brakes (usually in a tightened state, requiring external force to release the brake) and normally open brakes (usually in a released state, requiring external force to apply the brake). 4. According to the control method: It can be divided into manually operated, hydraulically operated, pneumatically operated, and electromagnetically operated brakes.
17
3
Share

What are the shifting techniques when there is no synchronizer?

When operating a transmission without a synchronizer, the shifting technique is to use the "double-clutching method", which can ensure smooth gear shifting. Here is some knowledge about synchronizers: 1. Classification and structure: Synchronizers come in various forms such as constant-pressure type, inertial type, and self-energizing type. Currently, the inertial synchronizer is widely used. It mainly consists of a coupling sleeve and a synchronizer ring, and its characteristic is achieving synchronization through friction. 2. Inertial synchronizer: Like the constant-pressure synchronizer, it achieves synchronization through friction. However, it can structurally ensure that the coupling sleeve and the spline gear ring to be engaged cannot come into contact before synchronization is achieved, thereby avoiding gear impact and noise.
16
0
Share

How to Reapply for a Complete Set of Car Documents if Lost?

When the complete set of car documents is lost, bring relevant certificates to the 4S shop or vehicle management office for reapplication. Here is an introduction to the reapplication process: 1. Reapplication of the Vehicle License: If the vehicle license is lost or damaged, apply for a replacement at the vehicle management office of the registration location. When applying, the vehicle owner should fill out the application form and submit identity proof. The vehicle management office should reissue or replace the vehicle license within one day from the date of acceptance. 2. Reapplication of the Car Purchase Invoice: If lost within five years, go to the 4S shop to find a copy, then have the 4S shop stamp it with the financial seal, and then go to the Industrial and Commercial Bureau to stamp the industrial and commercial verification seal. The owner must handle this in person; it cannot be done by others.
17
2
Share

Is Shifting Gears in an Automatic Transmission Difficult?

Here are the reasons why shifting gears in an automatic transmission might be difficult: 1. Operational Aspects: Incorrect operation by the driver, with speed and gear not matching. 2. Clutch-Related Issues: Rust on the transmission input shaft, preventing normal movement of the clutch driven plate, poor return, making it difficult for the gear to engage along the normal path, resulting in difficult gear shifting; clutch failure, causing insufficient clutch separation travel, leading to incomplete clutch separation and inability to engage gears. 3. Transmission-Related Issues: Old transmission oil needing replacement. If not replaced in time, its lubrication effect decreases, making gear shifting difficult; new car transmission components not yet reaching optimal running-in state, leading to difficult gear shifting; cold temperatures causing the viscosity of gear oil in the transmission to not reach optimal levels, reducing lubrication effect and thus making gear shifting difficult.
10
3
Share

Is Personal Presence Required for Auto Insurance Transfer?

Personal presence is not mandatory for transferring auto insurance. Below are relevant details: 1. Compulsory Traffic Accident Liability Insurance: Compulsory Traffic Accident Liability Insurance [full name: Motor Vehicle Traffic Accident Liability Compulsory Insurance] is China's first compulsory insurance system implemented by national law. 2. Vehicle Damage Insurance: Vehicle Damage Insurance covers losses to the insured vehicle caused by natural disasters (excluding earthquakes) or accidents within the insurance liability scope, with compensation provided by the insurer according to the insurance contract. 3. Third-Party Liability Insurance: This covers compensation for bodily injury or direct property damage to others (third parties) caused by accidents involving the insured vehicle. Collisions or hitting pedestrians are among the most feared scenarios, where not only is one's own vehicle damaged, but substantial compensation may also be required. Since the Compulsory Traffic Accident Liability Insurance (2008 version) offers relatively low compensation for third-party medical expenses and property losses, purchasing Third-Party Liability Insurance as a supplement is advisable even if Compulsory Insurance is already in place.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.