What is the normal tire pressure range for the Emgrand GS?

1 Answers
Trevor
07/30/25 9:14am
The normal tire pressure range for the Geely Emgrand GS is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The Geely Emgrand GS is equipped with an active tire pressure monitoring system (TPMS), which automatically monitors tire pressure while driving. However, it does not display the specific pressure or temperature values for each tire, only the TPMS warning symbol and the abnormal tire pressure warning symbol. When tire pressure is abnormal, the tire pressure warning light in the Emgrand GS will illuminate. Generally, a tire pressure above 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread pattern, shortening tire lifespan; increased body vibration, indirectly affecting the lifespan of other components; excessive stretching of tire cords, reducing tire elasticity and increasing the load on the vehicle while driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, which are unfavorable for driving safety; increased movement of tire parts, leading to abnormal overheating due to excessive rolling; reduced functionality of cords and rubber, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplied friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout. If the tire pressure monitoring indicator light (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside) illuminates, there are generally three possible reasons: Abnormal tire pressure: Typically, the system will alert if the pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring light to illuminate. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new part.
Was this review help?
8
4
Share
More Forum Discussions

What is the range of a 125cc scooter on a full tank of gas?

125cc scooter motorcycles can travel approximately 120 kilometers on a full tank of gas. Here is some relevant information about scooters: 1. Configuration: Scooters mostly feature continuously variable transmission with automatic clutches, similar to electric mopeds, without gear designs. After starting, you just need to twist the throttle to go, and releasing the throttle will automatically slow down until stopping. Additionally, scooter wheels are smaller than those of other motorcycles, and the transmission is mostly belt-driven. 2. Function of the footboard: The footboard refers to the wide footrest between the seat and the handlebars, allowing riders to place their feet on it while riding.
10
1
Share

Why do water droplets not fall off the car after rain?

This is due to the car being waxed, which generally prevents water droplets from running off. The benefit of waxing is to protect the car's paint. Below is relevant information about car waxing: The role of car waxing: As a traditional aspect of car care, waxing serves to waterproof and protect against acid rain. The protective layer of wax significantly reduces the amount of water droplets adhering to the car body, with an effectiveness ranging from 50% to 90%. Another benefit is protection against high temperatures and UV rays. As the weather gets hotter, cars that are driven or parked outdoors year-round are prone to paint aging and fading due to sunlight exposure. The film formed by waxing can reflect some of the light. Precautions for car waxing: The interval between waxing should vary depending on the driving environment and parking location of the vehicle. Before waxing, it is essential to thoroughly clean dirt and dust from the car's exterior.
1
5
Share

Can Cockroaches Leave a Car on Their Own?

As long as there are no food residues in the car, and you maintain cleanliness, ensure proper ventilation, and avoid parking in dirty or cluttered areas, cockroaches will leave on their own. Below are methods to deal with cockroaches: 1. Cockroach bait or gel: Place cockroach bait or gel in corners where cockroaches might appear, such as door gaps, under seats, or in the trunk, to lure and kill them. Be cautious to prevent children from touching or ingesting it. 2. Cockroach spray: Spray cockroach spray (insecticide) in the car's corners, then close the windows and wait for a day to eliminate the cockroaches. Typically, it takes one or two days for the spray to take effect, as insecticides are chemical products and may be harmful to humans. If you spray insecticide the night before, ensure the car is well-ventilated the next day before use to dissipate the odor. After killing the cockroaches, clean up thoroughly.
3
4
Share

Should I use 12V or 24V to charge my car?

Generally speaking, ordinary gasoline cars use 12V, most gasoline vehicles are 12V, while diesel vehicles, trucks, buses and other large vehicles are 24V. Ordinary small diesel vehicles, such as SUVs, sedans, and off-road vehicles, mostly use 12V. Extended content, methods to protect the battery are as follows: 1. Lock the vehicle after turning off the engine: After the car is turned off, promptly turn off lights, audio, and other electrical appliances. For keyless entry and start vehicles, it is also necessary to lock the car to put it into sleep mode to prevent battery drain. 2. Turn off the air conditioning when shutting down: Develop the good habit of turning off the air conditioning when shutting down. Compared to the car's lights, audio, cigarette lighter, and other power-consuming devices, the air conditioning consumes a significant amount of electricity, especially in winter and summer when it is most frequently used. However, many drivers have the bad habit of not turning off the air conditioning when shutting down. If this happens, the air conditioning will automatically start running the next time the car is started, which will result in a high instantaneous power load on the car. 3. Regular inspection and timely charging: If the car is parked for a long time, the negative terminal of the battery should be disconnected. Because for cars that are not used for a long time, the battery's charge will slowly decrease. If the car is needed suddenly, it may cause difficulty in starting the car. Additionally, even if the car is left unused for a long time with the battery disconnected, if the car is used infrequently, it is still necessary to take the car out for a drive every once in a while, or regularly inspect the battery. If the charge is insufficient, charge it in time to keep the battery in a full state, thereby extending the battery's service life.
7
2
Share

What lights should be used when driving straight through an intersection at night?

When passing through an intersection with traffic signals at night, use low beam headlights; when driving straight through an intersection without traffic signals at night, alternate between high and low beam headlights at least twice. Precautions for night driving are as follows: Precautions for overtaking at night: When overtaking at night, turn on the turn signal in advance and observe the vehicles behind. If the following vehicle is too close, it is not recommended to signal and overtake, as this may easily catch the following vehicle off guard. Methods for using lights when driving at night: When driving at night without street lights, poor lighting, or encountering low visibility conditions such as fog, rain, snow, dust, or hail, vehicles should turn on headlights, clearance lights, and tail lights, but should not use high beams when following another vehicle.
17
0
Share

What Causes the Engine Idle to Sound Like a Tractor?

Engine shaking and sounding like a tractor is a phenomenon called "engine backfire." Engine backfire occurs when, after the piston completes its work in the cylinder, the exhaust gases from combustion should exit through the exhaust pipe. However, due to some malfunction, the exhaust valve closes, preventing the gases from escaping or not allowing enough time for them to exit. As a result, the exhaust gases are forced out through other parts such as individual cylinders in the cylinder head, the crankcase, the carburetor, or the throttle valve, commonly referred to as "backflow" or engine backfire. Here are the common causes of engine backfire: 1. Overly Lean Air-Fuel Mixture: Possible causes include faults in the fuel system or intake system: Fuel system issues are mainly due to insufficient fuel injection by the injector, which can be caused by low fuel pressure or a clogged injector. Intake system faults are primarily due to excessive air intake, which can result from a malfunctioning sensor that controls air intake or a leak in the intake manifold. 2. Ignition System Problems: Mainly insufficient ignition energy (excessive resistance in high-voltage wires; damaged ignition coil; insufficient power supply voltage) or faulty spark plugs. 3. Excessive Ignition Timing Advance: Causes include improper CKP (crankshaft position sensor) gap; loose CKP; damaged temperature sensor; engine load; or a faulty ECU. 4. Excessive Deviation from Correct Ignition Timing: Symptoms: If the engine exhibits both backfire and loud popping noises, it is often due to incorrectly connected high-voltage wires for the cylinders. If the symptoms are less severe but occur intermittently and seemingly with a pattern, it is usually caused by cracks in the distributor cap, leading to cross-firing between cylinders.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.