What is the normal tire pressure in bar?

1 Answers
WyattFitz
07/30/25 7:21am
Choose the appropriate tire pressure based on seasonal factors. In summer, to prevent tire blowouts, the standard pressure is generally between 2.2-2.4 bar; while in winter, a tire pressure of 2.6-2.8 bar is recommended. Here are the relevant details: 1. Summer tire pressure: During summer, overall temperatures are higher, and car tires are prone to overheating. If the tire pressure is too high, it can easily lead to blowouts, so maintaining standard pressure is sufficient. 2. Winter tire pressure: Winter tire pressure is slightly higher than in summer because tires undergo thermal expansion and contraction. Due to lower winter temperatures, a pressure of 2.6-2.8 bar is generally most suitable. 3. Other influencing factors: (1) Load capacity: Whether the vehicle is half-loaded or empty, the tire pressure should generally follow the reference values indicated on the car's sticker. For fully loaded vehicles, the same reference values should also be used. (2) Measurement environment: Tire pressure differs between hot and cold tires, typically by about 0.2-0.3 bar. For more accurate readings, it's best to measure the tire pressure a few hours after the car has been turned off. Otherwise, subtract approximately 0.2-0.3 bar. (3) It's worth noting for car owners that vehicles frequently used for long-distance travel should not have tire pressure set too low. The pressure can be slightly increased by about 0.2 bar above the standard value.
Was this review help?
6
5
Share
More Forum Discussions

Where is the cigarette lighter in the Avalon?

The cigarette lighter socket in the Avalon is typically located in the center console area, marked with a cigarette-shaped icon. Here are some relevant details: 1. Powertrain: The seamless coordination between the ECVT, electric motor, and engine is unparalleled, delivering almost imperceptible jerkiness during normal acceleration and deceleration between 0-100km/h. Both throttle and brake tuning lean towards smoothness, with Normal mode providing restrained feedback and relatively low G-values during acceleration/deceleration. 2. Exterior design: The Avalon's styling demonstrates restraint, incorporating substantial Lexus design elements while maintaining a mature, sophisticated appearance. The front fascia features a spindle-shaped grille similar to Lexus but more aggressive, with slightly widened wheel arches that create a muscular, substantial presence.
12
1
Share

How to Replace the Battery in a Mercedes-Benz GLA Key?

Before replacing, it's best to first understand the battery model of your car key, which is usually indicated in the vehicle's user manual. Then, select a new key battery according to the specified model. Below are the steps to replace the battery in a Mercedes-Benz GLA: 1. On the side of the Mercedes-Benz GLA remote, there is a PUSH button. Press this PUSH metal head and pull out the mechanical key. 2. After removal, a small groove and a slit will be exposed at the top. Pry it open with force, and the key will split into two halves as you apply pressure. 3. The side with the circuit board is where the battery inside the key is located. 4. Flip it over, remove the old battery, and place a CR1632 battery in the metal frame position. 5. Then, place the circuit board back in its original position, close the two halves together, and you're done.
20
3
Share

What are the differences between Pajero V93 and V97?

Pajero V93 and V97 mainly differ in terms of engines, with the specific differences as follows: 1. The Pajero is a very famous Japanese off-road vehicle. In China, only the V93 version is available, but the V97 version can also be found through parallel imports. The overall performance of the Pajero V97's engine is slightly better than that of the V93. 2. The Pajero V93 is equipped with a V6 24-valve SOHC engine, which allows it to easily achieve a maximum power of 129/6000 and a maximum torque of 259/4750. The Pajero V97 is equipped with Mitsubishi's 3.8L, code-named 6G75 gasoline engine, which uses multi-point fuel injection technology. Its biggest features are its simple structure, low failure rate, strong durability, and the ability to ensure high torque output at low RPM driving conditions.
3
3
Share

What is the fuel tank capacity of the 2013 Buick Excelle?

The fuel tank capacity of the 2013 Buick Excelle is 44 liters. The Excelle is a compact sedan under the Buick brand, with dimensions of 4609mm in length, 1798mm in width, 1464mm in height, and a wheelbase of 2640mm. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the car manufacturer is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is added up to the tank opening during refueling, the actual fuel amount may exceed the marked capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the needle is close to E, it indicates low fuel, while nearing F means the tank is full.
3
0
Share

What is the replacement interval for the Mondeo's timing belt?

The timing belt of the Mondeo generally needs to be replaced every 100,000 kilometers or so. Below are the steps for replacing the timing belt: 1. Remove the valve cover, detach the crankshaft pulley, and take off the timing chain cover. Rotate the crankshaft to position the first cylinder at top dead center, then secure the crankshaft with a fixed wire. 2. Rotate the intake and exhaust camshafts. There are grooves at the rear of the camshafts; align the grooves of both camshafts evenly and insert the specialized tool. 3. Remove the old chain and install the new one. The crankshaft pulley does not have a keyway. During installation, align the round hole on the pulley with the groove on the timing chain cover. 4. The crankshaft position sensor is adjustable. Ensure there is no gap during installation, and the crankshaft sprocket and pulley should rotate freely.
20
3
Share

Why does the X-Trail not accelerate when stepping on the gas pedal?

Here are the reasons why a car does not accelerate when stepping on the gas pedal: Engine or fuel pump failure: Fuel pump failure or a clogged fuel filter can also cause a decrease in engine power. Engine malfunction occurs. The power source is the combustion of fuel, and the engine is responsible for supplying fuel and converting chemical energy into mechanical energy. Clutch failure: Clutch slipping. Clutch slipping mainly manifests as weak driving force when accelerating, especially noticeable when going uphill. Fuel system failure: Engine fuel system. If the engine oil is insufficient for a long time, it can lead to insufficient power and increased fuel consumption in mild cases; in severe cases, it can cause piston knocking and mechanical damage to related connecting parts.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.