What is the normal tire pressure for the Tiguan L?

2 Answers
McChristopher
07/24/25 12:01am
The normal tire pressure for the Tiguan L is generally between 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The Tiguan L displays tire pressure on the central information screen of the dashboard. The direct tire pressure monitoring system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts the driver when the tire pressure is too low or if there is a leak. Generally, a tire pressure above 2.8 bar is considered too high, and a pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: The system typically alerts when pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset, it will continue to display the previous data, causing the indicator light to stay on. Simply reset the tire pressure monitoring system. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged during driving, the tire pressure warning light will illuminate. In this case, the only solution is to replace the sensor with a new one.
Was this review help?
11
3
Share
TheoLynn
08/10/25 7:51pm
When I drove the Tiguan L for a while, tire pressure issues were quite common. The normal tire pressure range is between 2.3 to 2.5 bar, approximately 33 to 36 psi, depending on your vehicle's load. When unloaded, 2.3 bar is sufficient, but when fully loaded or driving at high speeds, it's safer to adjust to 2.5 bar. I make it a habit to check regularly, using an inexpensive tire pressure gauge to measure the cold tire pressure every month. Especially in summer when hot weather can increase tire pressure, I inflate slightly less; in winter when temperatures drop, I add about 0.1 bar to compensate. Remember to refer to the recommended values on the door frame label, as they may vary for different wheels. Too high tire pressure causes faster wear in the center of the tire and reduces grip; too low increases fuel consumption and makes the car prone to skidding. Once, during a long trip, low tire pressure nearly caused an accident, and since then, I've made it a routine—simple steps to ensure smooth and safe driving.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

What is a C5 driver's license?

C5 driver's license is a special license designed for disabled individuals to drive automatic transmission vehicles. Different types of driver's licenses permit the operation of different vehicles. A C1 license allows the holder to drive small cars as well as vehicles covered under C2, C3, and C4 licenses. A C2 license permits the operation of small and micro automatic transmission passenger cars, as well as light and micro automatic transmission cargo vehicles. Important considerations after obtaining a driver's license include: 1. Ensure all necessary documents are carried when driving, check the vehicle's condition in advance, inspect for any irregularities, and ensure the license plate is not obscured; 2. Do not drive under the influence of alcohol, after taking medication, when fatigued, without a valid license, or in extremely poor visibility; 3. Always obey traffic signals and road markings while driving, and be courteous to other road users; 4. Maintain an appropriate speed—avoid driving too slowly as it can disrupt traffic flow and cause road congestion, and avoid excessive speed, especially in poor weather conditions or low visibility, which can lead to accidents.
7
5
Share

What are the reasons for the lack of hot air from the rear air vents of the Buick GL8?

The reasons for the lack of hot air from the rear air vents of the Buick GL8 are: 1. The valve of the rear air vent is faulty, resulting in poor opening; 2. The pipeline is damaged; 3. The duct or air filter is clogged. Taking the 2021 GL8 as an example, it is an MPV with body dimensions of: length 5238mm, width 1878mm, height 1776mm, wheelbase of 3088mm, and a body weight of 1880kg. The 2021 GL8 features a front MacPherson independent suspension, a rear torsion beam non-independent suspension, front-wheel drive, and is equipped with a 2.0T turbocharged engine with a maximum horsepower of 237PS, maximum torque of 350Nm, maximum power of 174kW, paired with a 9-speed automatic transmission.
13
0
Share

Where is the computer connector of BAIC Weiwang m20 located

BAIC Weiwang m20 computer connector is located under the co-pilot blower. The following is the relevant introduction about the computer connector: 1. After the car fails, it needs to be detected by the computer, then it needs to be connected with the OBD interface on the car. OBD is a 16-pin connector. 2. When the system fails, the fault (MIL) light or check engine (Check-Engine) warning light will light up, and the powertrain control module (PCM) will store the fault information in the memory. The fault code can be read from the PCM through a certain procedure. 3. Its common function is to detect the failure of parts and systems at any time. When a failure is detected, an alarm is given through the alarm indicator light on the instrument panel.
15
1
Share

What does it mean when the TC light on the Malibu XL dashboard is on?

The TC indicator light on the Malibu XL dashboard, usually yellow, indicates that there is a fault with the traction control system or it has been turned off. Here is more information about the TC indicator light: 1. Meaning: TC stands for Traction Control System, which translates to the trace anti-skid control system in Chinese. 2. Function: The purpose of the TCS system is to maintain the vehicle's trajectory to match the driver's control. 3. Working principle: When accelerating, if the driving force is reduced and wheel slip is detected, the TCS system will send a signal to the engine control computer to reduce engine output and control the braking system, preventing wheel slip and allowing the vehicle to return to its normal direction and follow the original trajectory.
8
1
Share

How to Reset the Maintenance Light on Dongfeng Honda Vezel?

Method to reset the maintenance light on Dongfeng Honda Vezel: 1. Press the "A" button and step on the brake pedal, neither of which should be released midway. 2. Do not start the engine, but the vehicle's power must be turned on. 3. At this point, the dashboard or characters will start flashing. 4. Continue holding down the reset button "A" until "..." appears on the display screen. 5. Release the brake pedal and the "A" button. 6. Turn off the vehicle's power to complete the maintenance light reset. Below is more information about the Dongfeng Honda Vezel: 1. The Honda Vezel is an SUV developed from the chassis of the new Honda Fit. 2. The exterior design of the Honda Vezel largely adopts the front fascia of the new-generation Honda Fit, featuring LED headlights that are popular in compact cars.
1
2
Share

Where is the reverse light fuse located in the new Santana?

The fuse for the reverse light in the new Santana is located in the center position of the fuse box. The fuse box is situated above the right side of the clutch pedal in the driver's seat. Simply remove and open the fuse box to locate the reverse light fuse. Below is more information about the Santana: 1. The Santana is a brand car produced by Volkswagen in California, USA. 2. The new Santana completely abandons the boxy styling of the 1970s seen in the old model, replacing it with a more modern and stylish dynamic design, which now features the latest appearance of the Volkswagen family. 3. The new Santana is equipped with EA211 series engines with displacements of 1.4L and 1.6L. Among them, the 1.4L engine has a maximum power of 66kW, while the 1.6L engine reaches 81kW, and both adopt a lighter all-aluminum structure.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.