What is the normal tire pressure for the Honda Haoying?

1 Answers
SanKaylee
07/28/25 5:12pm
The normal tire pressure for the Honda Haoying is between 2.3 and 2.5 bar, with a maximum not exceeding 3.0 and a minimum not below 2.1. Definition of car tire pressure: Car tire pressure refers to the air pressure inside the tire, which is the blood pressure of the car. The level of tire pressure plays a crucial role in the performance and power of the vehicle. Factors affecting tire pressure: Tire pressure is also significantly influenced by seasonal factors. In summer, when temperatures are high, tires tend to heat up during driving. High tire pressure can easily lead to blowouts, so the tire pressure should be slightly lower. In winter, tire pressure should be a bit higher than in summer due to thermal contraction and expansion. Generally, a tire pressure between 250 kPa and 280 kPa is more suitable for cars in winter.
Was this review help?
17
3
Share
More Forum Discussions

Can I Keep the Air Conditioning On While Parked?

When the car is parked with the air conditioning on, it is generally recommended not to exceed 15 minutes. There are several reasons for this: Keeping the air conditioning on for a long time while parked can easily lead to carbon monoxide poisoning. Experiments have shown that in an enclosed space, it takes only 20 minutes for a car with the air conditioning on to exceed carbon monoxide levels. Increased fuel consumption: When parked, the engine idles at a low speed, resulting in low intake pressure. In this situation, the engine increases the throttle opening, thereby increasing fuel injection. Prolonged idling can lead to poor heat dissipation, damaging the car engine: When parked, the engine idles at a low speed, causing the oil pump pressure to drop. This can result in insufficient lubrication between the engine's friction surfaces, accelerating wear and tear.
18
2
Share

Is the Driving License Subject 4 Test Difficult?

Subject 4 is not difficult. Below is relevant information about Subject 4: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. The main content includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and knowledge of post-traffic accident procedures. 1. Depending on the type of driving license being tested, 50 questions are proportionally selected from the corresponding Subject 4 question bank. For car-type licenses, questions are selected from 1240 questions, while for large vehicle-type licenses, they are selected from 1235 questions, with each question worth 2 points. 2. The test duration is 45 minutes, and making mistakes totaling 12 points (6 questions) will terminate the test immediately.
19
2
Share

What is the difference between 200-cell and 300-cell headers?

Different emission levels: 300-cell: Vehicles with 300-cell headers have higher exhaust flow, resulting in correspondingly increased emissions. 200-cell: Vehicles with 200-cell headers have relatively lower exhaust flow compared to 300-cell, leading to lower emissions than 300-cell. Different sound levels: 300-cell: The sound from 300-cell exhaust pipes can reach up to 150 decibels. 200-cell: The sound from 200-cell exhaust pipes is around 100 decibels. Different exhaust combustion efficiency: 300-cell: Due to the larger exhaust pipes in 300-cell headers, some incompletely burned gases may be expelled, making it less likely to meet environmental standards. 200-cell: With smaller exhaust volume compared to 300-cell, gases are expelled through the exhaust pipes after more complete combustion, resulting in different exhaust combustion efficiency between the two.
9
0
Share

Why can't the Mercedes-Benz S350 shift gears?

The following are the specific reasons why the Mercedes-Benz S350 cannot shift gears: 1. P-gear lock solenoid valve failure: To prevent the vehicle from accidentally shifting into other gears when starting, there is a P-gear solenoid valve, which requires a signal from the brake pedal to release. These two components are interrelated, and if either one fails, it will prevent the gear lever from being pushed out of P-gear into other gears. 2. Internal failure of the gear lever assembly: Wear of the gears inside the gear lever causes the gear lever to get stuck, making it difficult to move forward or backward, resulting in the inability to shift gears or difficulty in shifting. 3. Incomplete clutch disengagement: This may be due to failure of the clutch disc or clutch pressure plate, requiring replacement of the clutch three-piece set, including the friction disc, pressure plate, and release bearing.
10
4
Share

How long after applying car cover can it be exposed to rain?

After applying a car cover, it can be exposed to rain two to three days later. The functions of a car cover are as follows: A car cover can block direct UV radiation: Car covers are protective covers made by manufacturers using specialized sun-proof fabrics. The selected materials can completely block UV transmission, reflecting or absorbing as much UV radiation as possible. A car cover can protect the paint surface: This function is direct and effective in any season, any occasion, and any natural environment. The impact of sun exposure on a car's paint surface is no less than scratching it directly with a knife. It can effectively prevent aging of car interiors: In summer, the interior temperature of a car can reach 70-80 degrees, while a car covered with a car cover maintains an interior temperature of around 30-40 degrees, which is relatively more acceptable for the human body.
13
1
Share

What is Wheel Diameter Size?

Wheel diameter size refers to the bead diameter and bead width. Below are relevant introductions: 1. Calculation formula for automobile tire diameter: Tire diameter = rim diameter + tire width × aspect ratio × 2. Since different vehicle models are equipped with different tire size specifications, the diameter of car tires also varies. Generally, the diameter range of tires is 60~80 cm. 2. Bead width: Bead width is usually represented by a string of alphanumeric characters. Taking 215/60R17-96H as an example, it indicates that the tire tread width is 215mm, the aspect ratio is 60%, the tire type is radial tire, and the applicable rim diameter is 17 inches.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.