···
Log in / Register

What is the normal tire pressure for the Geely Binyue?

4 Answers
CharlesLee
07/29/25 12:19pm

The normal tire pressure for the Geely Binyue is 2.2-2.5 bar. Generally, the manufacturer's recommended tire pressure can be found in places such as the vehicle's user manual, the label near the B-pillar of the driver's door, the drawer next to the driver's seat, and the back of the fuel tank cap when refueling. According to the international GBT2978-2008 standard, the tire pressure for different types of tires is as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. In summer, the tire pressure is generally set to the lower limit of the standard tire pressure for car tires. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1 bar lower than the standard to avoid tire blowouts due to high temperatures. In winter, the tire pressure should be based on the standard tire pressure for car tires, and it can be appropriately increased by about 0.2 bar.

Was this review help?
4
5
Share
LaKyle
08/13/25 11:03pm

I've been driving the Geely Binyue for several years, and the normal tire pressure generally ranges between 2.2 to 2.5 bar, depending on the model year and tire type. If the pressure is too low, the tire contact area increases, leading to a significant rise in fuel consumption and a sluggish driving feel. If it's too high, the ride becomes too stiff, reducing comfort and increasing wear on the central part of the tire. I prefer checking the tire pressure when the car is cold, such as after it's been parked for a few hours in the morning, using a tire pressure gauge for an easy check. The manual's recommended value is the standard reference, and adjustments are needed for different seasons. In summer, avoid overfilling to prevent overheating and expansion, while in winter, ensure it's not too low due to temperature effects on pressure. For regular maintenance, I check it monthly to prevent safety issues and extend tire life. Tires have a significant impact on driving; proper tire pressure enhances driving stability and fuel efficiency.

Was this review help?
13
5
Share
Expand All
MiaAnn
10/09/25 3:03am

As a family user who frequently drives a Geely Binyue, I maintain the tire pressure at around 230 to 250 kPa. The operation is simple: use a tire pressure gauge to measure each tire's value when the car is turned off and cold. If the pressure is low, inflate it; if it's high, release some air. I check it every time I refuel to ensure it's within the reasonable range. Improper tire pressure can cause bumps or make the steering wheel feel heavy, especially during long trips. The manual contains detailed data, so don't forget to check it. In terms of safety, stable pressure reduces the risk of tire blowouts, making driving more secure. Developing this habit saves both money and hassle.

Was this review help?
13
5
Share
Expand All
BrooklynFitz
11/22/25 4:17am

I prioritize driving safety, and maintaining the tire pressure of the Geely Binyue between 2.2 and 2.5 bar is crucial. Low tire pressure increases braking distance, especially in rainy conditions; excessive pressure may lead to tire bursts and loss of control. Regular tire pressure checks help prevent these risks—I recommend using a simple tire pressure gauge for monthly measurements. Temperature fluctuations significantly impact pressure; slightly higher pressure in summer is normal, while timely inflation is necessary in winter. Maintaining proper pressure ensures tire safety.

Was this review help?
15
0
Share
Expand All
More Forum Discussions

Are the CVT transmissions of the X-Trail and Sylphy the same?

The CVT transmissions of the X-Trail and Sylphy are not the same. The X-Trail stands out in terms of exterior design and interior styling. X-Trail Exterior Design: The X-Trail's instrument panel has a unique design, positioned further from the driver's line of sight. To see it clearly while driving, the driver must slightly tilt their head. It's unclear whether this "clever design" is intended to prevent the driver from maintaining a fixed posture. To fully enjoy the X-Trail's power, ensuring passenger comfort is essential. The second-row seats feature multi-angle reclining backrests, a center armrest, headrests and three-point seat belts for the outer seats, while the middle passenger has only a two-point seat belt. X-Trail Interior Styling: The dashboard follows a typical Japanese design but uses higher-quality materials, finer craftsmanship, and more harmonious color coordination. The leather-wrapped steering wheel has an optimal thickness and excellent grip. The instrument cluster is innovatively positioned at the center of the dashboard, slightly tilted toward the driver for better visibility, creating a somewhat head-up display-like effect. Function buttons are neatly arranged and within easy reach, showcasing Japanese cars' emphasis on ergonomics. The audio system features an AM/FM/6+1CD front-loading design for convenience, with six speakers delivering excellent sound quality, particularly in the bass range, which is rich and deep.
7
3
Share

What lights should be turned on when driving a motor vehicle in foggy weather?

When driving a motor vehicle in foggy weather, turn on the fog lights. If visibility is low, also turn on the hazard warning lights. Here are some precautions for driving in foggy conditions: Use lights correctly. Fog lights should be turned on in foggy weather as their light waves penetrate fog more effectively and illuminate farther. When visibility is extremely poor, you can turn on the hazard warning lights because yellow light has better penetration through fog. Remember not to use high beams. Use the horn for alerts when necessary. In foggy conditions, it's harder to see each other, so honk appropriately when overtaking, turning, or encountering pedestrians to signal your movements. Reduce speed and avoid sudden braking. First, slow down. Foggy weather reduces visibility, and most vehicles move slowly. Driving too fast increases the risk of rear-end collisions. Slowing down also helps avoid sudden braking, which can be dangerous since judging distances is difficult in fog, and sudden stops may cause accidents for vehicles behind. Avoid reckless overtaking. Do not rush to overtake in foggy weather, as low visibility makes it hard to assess the situation ahead of the vehicle in front. Especially in heavy fog, not only should you turn on the hazard warning lights, but it's also best to maintain a safe distance and follow the vehicle ahead. Only when you can confirm the road conditions ahead should you honk and pass slowly at a low speed.
7
2
Share

What Causes the Car AC to Only Blow Air at the 4th Speed?

The reason why the car AC only blows air at the 4th speed is due to a damaged blower motor resistor. The car AC may also experience the following issues: 1. Reduced airflow: A dirty cabin air filter can cause the blower motor to make noise, but the airflow remains weak. 2. Inability to adjust airflow direction: Damaged air deflectors or airflow direction control switches can prevent airflow direction adjustment. 3. Abnormal airflow: A frozen evaporator can cause sudden loss of airflow at high speeds, though the blower motor can still be heard running. Restarting the AC may restore airflow. 4. Uneven airflow between left and right vents: It is normal for the right vent to have stronger airflow than the left vent.
20
2
Share

How to Automatically Switch the 64-color Ambient Lighting in Mercedes-Benz?

You can select and switch the ambient lighting through the Comfort Ambient Lighting menu option on the central control screen. More details about the ambient lighting are as follows: 1. Introduction: As the name suggests, it is a decorative light that creates an atmosphere. Commonly encountered examples include LED strips in living room decorations, where different colors can evoke feelings of warmth, relaxation, and comfort. 2. Extension: Phrases like 'bright lights and vibrant colors' or 'dazzling and colorful' best describe the lighting effects that create such an atmosphere. Car ambient lighting refers to the decorative lighting inside the vehicle that sets the mood, and the color can be chosen according to personal preference.
9
0
Share

How to Turn on the Cold Air in a Volkswagen Passat?

For automatic air conditioning, simply press the AUTO button, and it will adjust automatically according to the temperature inside the car. For manual air conditioning, switch to the cold air mode. The functions of the Passat's air conditioning buttons are as follows: 1. Press AUTO to start/close the air conditioning. 2. Press the A/C button to select the cooling or heating function. More information about the Passat is as follows: 1. The Passat (PASSAT) is a mid-size sedan designed by Volkswagen AG in Germany. It is classified as a B-segment car in Volkswagen's lineup. 2. The Passat has always been one of the most important models for Volkswagen, primarily targeting the mid-size sedan market. Its name comes from the German word Passat (or Passatwinde), referring to the tropical trade winds blowing from the subtropical regions towards the equator.
20
3
Share

Why is it necessary to change engine oil regularly?

Engine oil, much like blood circulating in the human body, flows between various moving components within the engine. It serves four primary functions: lubrication, cooling, cleaning, and sealing. Among these, lubrication is the most crucial role. It forms a protective oil film on the surfaces of interacting engine parts, which not only ensures smooth high-speed operation but also minimizes wear on contact surfaces. The formation of this oil film primarily relies on the oil's viscosity. However, after prolonged engine use, this viscosity degrades, compromising the oil film's effectiveness, necessitating regular oil changes. Additional details about engine oil are as follows: 1. Consequences of not changing oil: Failure to change oil may initially cause abnormal engine wear, increased noise, and higher fuel consumption. In severe cases, it can lead to seizure of critical components like the crankshaft or camshaft, rendering the engine inoperable. 2. Composition of engine oil: Typically consisting of base oils and various additives, engine oil is a chemical product derived from petroleum refining. Operating in complex environments with high temperatures (approximately 90°C for Japanese vehicles and 110°C for European/American models), it undergoes oxidation, generating impurities and causing gradual separation of resinous substances – all of which degrade oil performance. 3. Oil oxidation process: As pistons reciprocate in cylinders, high-temperature/pressure gas mixtures infiltrate the crankcase through piston-cylinder gaps, accelerating oil oxidation and causing darkening. 4. Factors affecting oil performance: During cold starts, gasoline injected into cylinders can seep into the crankcase, mixing with oil. This dilution reduces viscosity and impairs oil functionality. 5. Lubrication breakdown: Friction between engine components (e.g., pistons/cylinders, crankshaft/bearings) generates metal particles. While oil filters capture larger debris, microscopic particles remain in circulation, gradually diminishing lubricating properties over time.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.