What is the normal tire pressure for the Changan CS55?

1 Answers
LeMiles
07/29/25 3:47pm
The normal tire pressure for the Changan CS55 is 2.4. Tire pressure refers to the air pressure inside the tire. The standard tire pressure values for a car can be found in the following locations: 1. Vehicle user manual; 2. Label next to the B-pillar on the driver's side door; 3. Drawer beside the driver's seat; 4. Small door on the fuel tank cap. Taking the 2019 Changan CS55 as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4500mm in length, 1855mm in width, 1690mm in height, a wheelbase of 2650mm, a minimum ground clearance of 190mm, a fuel tank capacity of 58 liters, and a curb weight of 1460kg.
Was this review help?
4
0
Share
More Forum Discussions

Where is the fuel filler button located on the Audi A6L?

The fuel filler button on the Audi A6L is located at the lower part of the driver's door, on the left side of the driver's leg space. The fuel filler button is positioned together with the switch for the front engine compartment. Simply press this electronic switch to open the fuel tank cover. The Audi A6L requires 4.5 liters of engine oil. Engine oil, also known as lubricating oil, plays crucial roles in the engine such as lubrication, cleaning, cooling, sealing, reducing wear, damping vibrations, and preventing rust and corrosion. Currently, there are three types of engine oils available on the market: conventional mineral oil, semi-synthetic oil, and fully synthetic oil. The Audi A6L has dimensions of 5036mm in length, 1874mm in width, and 1466mm in height, with a wheelbase of 3012mm. All engines in the Audi A6L series utilize direct fuel injection technology and offer four comprehensively upgraded gasoline engines: 2.0TFSI, 2.5FSI, 2.8FSI, and 3.0TFSI. It is essential to change the engine oil of motor vehicles regularly and on schedule to avoid affecting the normal operation of the engine. Engine oil effectively protects the internal components of the engine and plays a vital role, making regular maintenance necessary.
5
2
Share

What is the reason for the electric fan not working when the air conditioning is turned on in the Volkswagen Tiguan?

If the electric fan of the Volkswagen Tiguan's air conditioning does not rotate, it is likely due to damage to the fan motor coil. Reasons for the electric fan not working: The contact resistance of the main control switch is poor or there is poor contact, the capacitor of the fan is open or short-circuited, the fixing screws between the motor and the fan blade are loose, and the electric fan of the air conditioning does not rotate. Solutions: The driver can use a multimeter to measure the contact resistance of the main control switch; if the resistance is zero or too high, the driver should replace or repair it as soon as possible. The driver should check the capacitor and replace it with one of the same specifications. If the fixing screws between the motor and the fan blade are loose and the electric fan of the air conditioning does not rotate, the driver should tighten the screws. The high and low speeds of the electric fan are only controlled by the thermal switch (F18). The thermal switch has two positions and is installed on the water tank to detect the water temperature. It provides two signals to J293, which then connects different open circuits to control the high and low speeds of the electric fan. When the air conditioning is turned on, both fans must rotate.
16
4
Share

What kind of paint is used on the Skoda Octavia?

Skoda Octavia uses domestically produced paint. Below are the painting process and precautions: Precautions for automotive painting: After painting, the paint surface should be fine after a few days. Right after painting, pay attention to the baking time; avoid washing the car when the paint is not fully dry. Avoid contact with chemicals and grease, as they can easily damage the paint surface. Do not cover the newly painted car with a car cover, as it may cause fine scratches on the paint. Try to park the car in sunlight as much as possible. This helps the paint dry thoroughly and also tests the skill of the painter in mixing and applying the paint. Automotive painting process: First, thoroughly clean the car's surface to remove dust and debris, and determine the repair process. Apply oil treatment to the area to be painted. Select appropriate sandpaper to sand the area to be painted, ensuring all old paint is smoothed out. After removing all the old paint, apply putty to fill in imperfections. Once the putty is applied, use an air gun to blow away dust and impurities from the surface to prevent paint splatter. Then, spray the pre-mixed paint, which can be done in 3-5 layers. After painting, wait for the paint to dry, then sand and smooth any uneven areas to achieve a natural finish.
2
2
Share

How to Drain Water from Motorcycle Fuel?

Disconnect the fuel pump's outlet pipe, turn the key, and the fuel pump will operate automatically for a few seconds. Repeat the process of turning the key on and off several times to drain the fuel tank. Then, add 1 liter of gasoline, turn the key again, and wait until the ejected gasoline has expelled all the water, indicating that the water in the motorcycle fuel has been completely drained. Below is an extended introduction about motorcycles: 1. Basic Information: Motorcycles encompass a wide range, including super sports motorcycles and touring motorcycles. They all possess the functionalities of sports motorcycles, hence they can also be categorized as sports motorcycles. 2. General Categories: Road motorcycles can be divided into three main categories: super sports motorcycles, touring motorcycles, and American motorcycles. Since these motorcycles are primarily used on smooth paved roads, they are also known as urban motorcycles. The concept and scope of road motorcycles are quite ambiguous; in fact, they might be better referred to as standard motorcycles. Structurally, road motorcycles are only suitable for paved roads, where they can achieve excellent performance. Conversely, they encounter many difficulties when ridden in off-road conditions. In contrast, there are off-road motorcycles, which can be further classified by usage area into touring off-road motorcycles and urban off-road motorcycles. 3. Historical Origins: In the global history of vehicle development, bicycles came first, followed by motorcycles, and finally cars. The origins of motorcycles worldwide are in countries like Germany, France, the UK, and Italy, as well as the United States in North America. The world's very first motorcycle was created in 1769 by the Frenchman Nicholas Cugnot, using a steam engine.
3
1
Share

What are the differences between the Wuling LSI engine and the B12 engine?

Wuling LSI engine and B12 engine differ in terms of manufacturer and power. Below are the specific details about the Wuling LSI engine and the B12 engine: Wuling LSI engine: The Wuling LSI engine is manufactured by SAIC-GM. It is a 1.2L displacement multi-point fuel injection engine with a naturally aspirated intake method. It features 4 cylinders arranged in an L configuration, with a maximum speed of 5600rpm. It can deliver a maximum horsepower of 82Ps (reaching a maximum power of 60.3kw at 5600rpm) and a maximum torque of 115N·m at 3600-4000rpm, with a compression ratio of 10.2. B12 engine: The B12 engine is manufactured by SAIC-Wuling. It has a displacement of 1.2L, a power output of 63KW, and 16 valves. The B12 series engines are divided into two power platforms: the S-TEC engine and the P-TEC engine. Due to the different brand values of Buick and Wuling/Baojun, Wuling and Baojun models are equipped with the P-TEC engine, while Buick models such as the Excelle and Sail are equipped with the S-TEC engine.
14
0
Share

How long must one wait to reschedule the Subject 4 exam?

You must wait ten days before you can reschedule the exam online. Below is relevant information: Subject 4: Also known as the Subject 4 theory test or driver theory test, it is part of the motor vehicle driver's license examination. Retake instructions: If you fail Subject 4, you do not need to retake the previously passed subjects (Subject 1, Subject 2, Subject 3). You can independently schedule a retake, and no additional fees are required for the retake. There are no scheduling restrictions for the safe and civilized driving theory test. However, the driving skills test permit is valid for three years. If the applicant does not complete the exam within this period, the results of any passed subjects will become invalid.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.