What is the normal tire pressure for the BYD Song Pro?

What is the fuel tank capacity of the Verano in liters?

The 2022 Verano has a fuel tank capacity of 44L, equipped with a 1.5T turbocharged engine, delivering a maximum power of 135kW, maximum horsepower of 184P, and maximum power speed of 5500rpm. In the same class, the 2021 Bluebird has a fuel tank capacity of 50 liters, and the 2022 Octavia has a fuel tank capacity of 51 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by car manufacturers is measured from the bottom of the tank to the safe limit, and there is additional space from the safe limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the dashboard, marked with E and F. When the needle is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.

20

4

Share

Where is the vehicle GPS usually installed?

GPS installation locations are as follows: 1. Inside the front and rear bumpers: This is the most common placement location because it is very concealed and generally goes unnoticed, ensuring sufficient security. Additionally, the bumper's concave-convex design makes it ideal for installing GPS devices in the grooves. 2. Inside the trunk: The car's trunk is very spacious, offering numerous potential installation spots. Basically, laying a blanket in the trunk is enough to completely cover the GPS and prevent detection. Another location is near the taillights in the trunk area, which most people wouldn't pay attention to. Moreover, satellite signals in the trunk are relatively unobstructed, ensuring no impact on positioning accuracy. 3. Under the front windshield decorative panel: Unless the front panel is removed, the GPS placed here is virtually undetectable. 4. Inside the spare tire: This is also very concealed, but there's a drawback—this method generally only applies to spare tires mounted on the rear of the vehicle, not those stored inside the trunk. This is because the trunk + spare tire + metal layers of the spare tire casing can significantly interfere with the GPS signal. 5. For wired installations, they are typically placed in the center console, A-pillar, or under the steering wheel.

10

4

Share

Does a major overhaul of the Volkswagen CC engine have any impact?

As long as most of the replaced parts are normal components and the assembly is done properly, there will be no impact on the engine. Generally, a major overhaul refers to the adjustment and replacement of core components such as pistons, piston rings, cylinder liners, crankshafts, bearings, rocker arms, valves, push rods, etc. It also involves adjusting valve clearance and fuel injection timing, as well as performing computer matching for the engine control module (VECU). A professional major overhaul can essentially restore the engine to its optimal normal condition, so there is no need to worry. After a major engine overhaul, it is important to note that cold running-in should last for more than 3 hours, which means the engine is slowly rotated by an electric motor. Then, hot running-in should last for more than 2 hours, which is idle rotation. Of course, most auto repair shops do not have such capabilities, so you can only idle the engine for two to three hours initially. Within the first week of driving, do not exceed 60 km/h, and avoid sudden acceleration or deceleration.

8

4

Share

How to Turn on ETC Bluetooth?

ETC Bluetooth activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth is on". ETC activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth is on". If "Tag invalid" appears when inserting and removing twice without the electronic tag attached, it is a normal phenomenon and does not affect activation. Alternatively, you can directly press the button on the top of the electronic tag to turn on the Bluetooth function. Turn on the mobile phone Bluetooth, open the corresponding mobile APP (usually there is a download QR code on the electronic tag), and enter the device activation interface. Click on device connection and wait patiently for the "Connection successful" prompt. After successful connection, upload a photo of the vehicle's front to complete activation. ETC installation positions: For small vehicles such as cars and minivans, the ETC card and OBU device are installed in the upper middle part of the front windshield. For large vehicles such as trucks and buses, the installation position is in the middle lower part.

20

0

Share

Can the steering wheel of a car be replaced?

Car steering wheels can be replaced. The steering wheel is a control component, and the principle of the entire steering mechanism is to convert circular motion into linear motion through a rack and pinion system, which then pushes the wheels to rotate. Steering wheels come in materials such as genuine leather and wrapped leather, allowing you to choose based on your preference. It's important to select the right thickness; if the steering wheel feels too thick or too thin after installation, it can significantly affect the driving experience. Additionally, attention should be paid to the fit—if it's too loose, it may slide during steering, so it's best to purchase a product specifically designed for your car model. There are many performance steering wheels available on the market today. Modifying with such steering wheels can have several negative impacts, such as: reduced size potentially blocking the instrument panel, hands easily hitting the windshield wiper switch, increased effort required for steering, and inability to install airbags, among others. Therefore, when choosing such steering wheels, it's crucial to be aware of these potential drawbacks. For vehicles equipped with airbags, it is generally advised not to modify with such steering wheels.

5

3

Share

What is the method for removing the rear driveshaft of a BMW X5?

The method for removing the rear driveshaft of a BMW X5 is as follows: 1. Unscrew the fixing screws of the muffler cover and remove the muffler cover. 2. Unscrew the fixing screws of the muffler and remove the muffler. 3. Unscrew the fixing screws of the rear differential driveshaft and use a screwdriver to pry the rear differential driveshaft. 4. Remove the rear differential driveshaft, and the disassembly is complete. Below is more information about the BMW X5: 1. The dimensions of the new BMW X5 are 4945mm in length, 2004mm in width, and 1791mm in height. The overall style maintains its sporty feel while appearing more youthful visually. 2. In terms of power, it is equipped with a B58 3.0T inline six-cylinder turbocharged engine, delivering a maximum power of 340 horsepower and a maximum torque of 450 N•m. It is paired with an 8-speed automatic transmission, and an electronic limited-slip differential is available as an option.

5

2

Share

What is the normal tire pressure for the BYD Song Pro?

What is the fuel tank capacity of the Verano in liters?

Where is the vehicle GPS usually installed?

Does a major overhaul of the Volkswagen CC engine have any impact?

How to Turn on ETC Bluetooth?

Can the steering wheel of a car be replaced?

What is the method for removing the rear driveshaft of a BMW X5?

Is There a Warranty When Buying a Car from an Auto Trader?

What Causes Engine Shaking During Ignition in Small Cars

What is the difference between 6 speakers and 8 speakers in the Sagitar?

How Does the Car Starting System Work?