What is the normal tire pressure for the Atenza?
1 Answers
The normal tire pressure range for the Atenza is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. The Atenza's tire pressure monitoring system is an indirect type, which only alerts when the tire pressure is abnormal and does not display specific values. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the factory tire pressure label, press the gauge onto the tire valve to measure and read the pressure, and remember to replace the valve cap after measurement. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system usually alerts when the pressure is below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. The tire pressure monitoring system has not been reset. After inflating the tires, if the tire pressure reset is not performed promptly, the system will still record the previous data, causing the indicator light to come on. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged during driving, it can also trigger the tire pressure warning light. For sensor damage issues, the only solution is to replace it with a new component.
