What is the normal tire pressure for the 2021 Corolla?
1 Answers
The tire pressure for the 2021 Corolla is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. For the 2021 Corolla, you can check the tire pressure by switching left and right on the buttons located on the left side of the steering wheel. First, press the left or right button on the steering wheel, and then the tire pressure numbers for all four wheels will be displayed on the right side of the instrument panel. Generally, a tire pressure above 2.8 bar is considered too high, and below 2.0 bar is too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear on the central tread of the tire, shortening its lifespan; increases body vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire components, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm when below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the indicator light to stay on. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged while driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.
