What is the normal tire pressure for Nissan X-Trail?

1 Answers
MacParker
07/24/25 2:12am
The normal tire pressure range for Nissan X-Trail is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The high-end models of Nissan X-Trail are equipped with an active tire pressure monitoring and alarm system. While driving, the tire pressure monitoring system automatically monitors the tire pressure and displays specific values without manual activation. Other models can only check tire pressure using external instruments. Generally, a tire pressure above 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no seal on top, four small spikes below, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Typically, an alarm is triggered when pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, the tire pressure was not reset in time, causing the system to record the previous data, which triggers the indicator light. Simply reset the tire pressure to resolve this issue. Damaged tire pressure sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving, it can cause the tire pressure warning light to illuminate. For sensor damage, replacement with a new part is the only solution.
Was this review help?
3
3
Share
More Forum Discussions

What does a key symbol on the car dashboard indicate?

When a key symbol appears on the car dashboard, it may indicate that the vehicle's anti-theft system has been triggered. Here's the relevant information: 1. With the development of the automotive industry, there are increasingly more vehicles in society. Whether it's a family car worth tens of thousands or a luxury vehicle worth millions, we rarely see news reports about car thefts. When observing vehicles parked on the roadside, we no longer find steering wheel locks that many owners used to install. 2. When the car's anti-theft system is triggered, a key symbol will appear on the dashboard. Modern car keys are no longer simple mechanical keys but integrated circuit, network, and mechanical key systems. When the signal from the key doesn't match the car's password, the vehicle system will recognize it as illegal entry, and the anti-theft system will automatically lock the engine, preventing the vehicle from starting. 3. The anti-theft system may be triggered in these situations: not using the electronic key lock button when boarding and starting the engine or using a mechanical key to open the trunk lid; opening the engine hood and reconnecting the battery terminals after disconnection; breaking into the car door to forcibly enter the vehicle; changing the vehicle's pitch angle and switching the power to IG-ON through a heating wire without operating the power switch. These situations will trigger the anti-theft system, causing the engine to be locked and unable to start.
11
2
Share

What is the difference between a manual and automatic driver's license?

The biggest difference between an automatic transmission license and a manual transmission license is that with a manual transmission license, you can drive both manual and automatic transmission vehicles, whereas an automatic transmission license only permits driving automatic transmission vehicles and not manual transmission ones. The differences between a manual transmission driver's license and an automatic transmission driver's license are as follows: 1. The permitted vehicle types are different. The permitted vehicle type for a manual transmission license is: "Small cars," while for an automatic transmission license, it is: "Small automatic transmission cars." 2. The codes representing the permitted vehicle types are different. The code for a manual transmission license's permitted vehicle type is: "C1," while for an automatic transmission license, it is: "C2." 3. The permitted vehicles are different. The permitted vehicles for a manual transmission license include: "Small and micro passenger vehicles, as well as light and micro cargo vehicles; light and micro special operation vehicles." The permitted vehicle type for an automatic transmission license is: "Small and micro automatic transmission passenger vehicles and light and micro automatic transmission cargo vehicles." 4. The other permitted vehicle types differ. Other vehicle types that can be driven with a manual transmission license include: "Small automatic transmission cars (code C2), low-speed cargo vehicles (code C3), and three-wheeled vehicles (code C4)."
18
2
Share

How to Cancel the Speed Limit on Cruze?

There is a button on the left side of the Cruze steering wheel. Adjust it to the speed limit setting, then turn it up or down to the cancel position to deactivate the speed limit. Here are some related details: 1. Currently, the Chevrolet Cruze has been discontinued, with the latest model being the 2018 version. Therefore, the Cruze available on the market is either a used car or leftover stock. 2. The 2018 Chevrolet Cruze adopts the latest family design language, featuring a slim double-layer grille. The upper grille is embedded with the Chevrolet logo in the middle and connects to the upward-slanting headlight clusters via decorative chrome strips. Both the upper and lower grilles extensively use horizontal chrome decorative strips. 3. The overall front face design is relatively flat. The side profile features a continuous waistline that rises in a diving posture, giving a strong sense of sportiness. 4. The 2018 Cruze still offers a 1.5L naturally aspirated engine and a 1.4T turbocharged engine. The 1.5L engine delivers a maximum power of 114 horsepower and a maximum torque of 146N·m, while the 1.4T engine provides a maximum power of 150 horsepower and a maximum torque of 240N·m. The transmission system is paired with a 6-speed manual, 6-speed automatic, or 7-speed dual-clutch transmission.
15
1
Share

What Does an Automatic Transmission Driver's License Test Cover?

An automatic transmission driver's license is classified as C2. The C2 license is a type of driver's license that permits the holder to drive small and mini automatic transmission passenger vehicles, as well as light and mini automatic transmission cargo vehicles. The C2 license is one of the more common driver's licenses, allowing the operation of automatic transmission vehicles with no more than 9 seats and a length not exceeding 6 meters. Below is an introduction to the relevant test subjects: 1. Subject 1: A written test on road traffic safety laws, regulations, and related knowledge (Subject 1), conducted on a computer with a perfect score of 100, and a passing score of 90 or above (including 90). 2. Subject 2: A practical driving skills test (Subject 2) conducted in a designated area using an actual vehicle. The test is simply pass or fail. The five mandatory test items, conducted in sequence, are reverse parking, parallel parking, S-curve driving, right-angle turning, and hill start and stop. The perfect score is 100, with a passing score of 80 or above (including 80). 3. Subject 3: A road driving skills test (Subject 3) conducted on a highway or simulated course using an actual vehicle. The perfect score is 100, with passing scores of 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: A written test on safe and civilized driving knowledge (Subject 4), with a perfect score of 100 and a passing score of 90 or above (including 90).
10
2
Share

How to Open the Engine Hood of the Envision?

The method to open the engine hood of the Envision mainly includes: 1. First, pull the handle under the driver's compartment, then go to the front center, use one hand to pull the hood upwards while inserting the other hand into the center gap. 2. There is a lever inside; pull it firmly to the right to open the engine hood. 3. To close the engine hood, simply press it down manually. Additional information: 1. This vehicle has further refined the process and technology of the engine fuel system to improve combustion efficiency. Additionally, the entire three-way catalytic converter assembly has been upgraded, significantly reducing the emissions of particulate matter and gaseous pollutants. 2. In addition to the upgraded emission standards, the Buick Envision has also comprehensively revamped the drivetrain of the National VI-compliant 20T model, featuring a newly calibrated 1.5T SIDI direct-injection turbocharged engine paired with an upgraded 7-speed DCG dual-clutch transmission, delivering a maximum power of 124kW (169PS)/5600rpm and a maximum torque of 250N·m/1700-4400rpm. The 28T model continues to be equipped with a 2.0T SIDI direct-injection turbocharged engine, matched with a 9-speed automatic transmission, producing a maximum power of 191kW (260PS) and a maximum torque of 400N·m.
10
3
Share

What is the normal range for brake pad thickness?

A new brake pad has a thickness of approximately 1.5cm, which gradually wears down with continuous friction during use. Relevant information about brake pads is as follows: 1. Classification: Automotive brake pads can be categorized by type into: brake pads for disc brakes, brake shoes for drum brakes, and brake linings for heavy trucks. Brake pads are mainly divided into the following categories: metal brake pads and carbon-ceramic brake pads. Metal brake pads are further divided into low-metallic brake pads and semi-metallic brake pads, with ceramic brake pads classified under low-metallic. Carbon-ceramic brake pads are used in conjunction with carbon-ceramic brake discs. 2. Braking Principle: The working principle of braking primarily relies on friction, utilizing the friction between the brake pads and brake discs (or drums) and between the tires and the ground to convert the kinetic energy of the moving vehicle into thermal energy through friction, thereby stopping the car. A good and efficient braking system must provide stable, sufficient, and controllable braking force, along with excellent hydraulic transmission and heat dissipation capabilities to ensure that the force applied by the driver on the brake pedal is effectively transmitted to the master cylinder and slave cylinders, while avoiding hydraulic failure and brake fade caused by excessive heat. 3. Service Life: The replacement of brake pads depends on how long the pads have been in use on the vehicle. Generally, brake pads need to be replaced after traveling more than 80,000 kilometers. However, if friction sounds are heard from the wheels, the brake pads should be replaced regardless of the mileage.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.