What is the normal tire pressure for Lavida?

1 Answers
ORylee
07/29/25 9:15pm
The normal tire pressure range for Lavida is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. Lavida cannot display the tire pressure value because its tire pressure monitoring is automatic. If the tire pressure is abnormal, it will automatically alarm. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the original tire pressure label, press the tire pressure gauge against the tire valve to measure and read the value. Remember to replace the valve cap after measuring. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. It usually alarms when the pressure is below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. The tire pressure monitoring was not reset. After inflating the tire, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the original data, and the tire pressure monitoring indicator light will come on. At this time, just reset the tire pressure. The tire pressure sensor is damaged. The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged while driving, it will also cause the tire pressure fault light to come on. For sensor damage, only a new replacement can be installed.
Was this review help?
1
2
Share
More Forum Discussions

Is there a relationship between car A-pillar water leakage and the sunroof?

There are generally three main reasons for car A-pillar water leakage, as introduced below: 1. Clogged sunroof drainage holes: Dirt blocks the sunroof drainage outlets, preventing water from draining in time and causing it to flow into the A-pillar through the conduit interface. In this case, the sunroof drainage outlets need to be cleaned to ensure they are unobstructed. 2. Poor sealing of the window rubber strips or the fixing holes of the roof rack: In this situation, the sealing strips should be inspected, and any old ones should be replaced. 3. If the front windshield has been replaced recently, it may be due to uneven application of adhesive on the front windshield: This can cause rainwater to leak through the gaps, requiring the front windshield to be reinstalled and the adhesive reapplied.
1
1
Share

What causes abnormal noises in a car?

Car rattling noise reasons are as follows: 1. Reason one: When the car is cold started, the engine sound will be slightly louder than when the engine is warm. As long as the sound is uniform and soft, not harsh, it is generally not a problem. This is because when the engine is cold, the gap between the cylinder wall and the piston has not reached the optimal size, and the lubrication of the engine oil is not sufficient. Usually, when the engine block temperature reaches about 95 degrees, the sound will return to normal. 2. Reason two: Engine oil issues. Poor-quality engine oil, not changing the oil for a long time, or lack of engine oil can easily increase the friction between the valves and the guides, as well as the hydraulic lifters, making various sounds in the engine louder.
13
0
Share

Why can't Porsche CarPlay connect?

The reason why Porsche CarPlay cannot connect may be due to network issues. Here is relevant information: 1. CarPlay system or Carlife system: Many newly launched models are equipped with either the CarPlay system or Carlife system. The CarPlay system connects to Apple phones, while the Carlife system connects to Android phones. After connecting to CarPlay or Carlife, drivers can make and receive calls, send messages, navigate, listen to music, etc., on the car's central control screen. This allows drivers to operate the car's system directly without handling their phones while driving. 2. Notes: Most car's CarPlay systems require a wired connection and do not support wireless connection. When using a wired connection, it is recommended to use the original data cable that came with the phone, as most aftermarket cables only have charging functionality and lack data transmission capabilities.
11
5
Share

Why does the car lack power when climbing a hill in second gear?

Vehicle climbing a hill in second gear lacks power due to fuel quality issues and inappropriate gear selection. Below are the detailed explanations: 1. Fuel quality issues: If the fuel used is of poor quality, excessive impurities or water content in the fuel will result in insufficient power. Moreover, inferior fuel can easily clog components with small holes or filtration functions such as the fuel filter, fuel pump screen, and fuel injectors, leading to poor fuel supply and reduced engine performance. 2. Inappropriate gear selection: When climbing a hill, if the gear is not suitable, the engine speed will naturally struggle to increase. For manual transmission vehicles, it is generally recommended to use gears 1 to 3 depending on the situation when climbing. For automatic transmission vehicles, if the slope is too steep, it is advisable to shift into the L (Low) gear.
13
5
Share

Is it necessary to install a car mask?

It is necessary to install a car mask. Here are the relevant introductions about car masks: 1. Introduction one: It has good filtering and blocking effects. The product is made of special stainless steel wire mesh and high-temperature resistant rubber, which can effectively solve the high temperature phenomenon caused by the blockage of the water tank radiator. Good heat dissipation and breathability performance reduce the working frequency of the electronic fan and compressor. 2. Introduction two: Unique static resistance technology prevents dust and haze from entering the cab from outside the car, thereby keeping the air inside the car fresh and pollution-free, effectively eliminating the sub-health state of drivers and passengers caused by severe air pollution in the car.
9
1
Share

What does 'fast and tail flick' mean?

Tail flick is a common issue with rear-wheel-drive cars, where the rear wheels lose most (or all) of their grip, while the front wheels must maintain their grip (at most losing a small portion, ideally gaining additional grip). At this point, as long as there is some lateral force on the front wheels, the car will flick its tail, resulting in a drift. Below are methods to induce a drift: 1. Pull the handbrake while driving straight and then turn the steering wheel. 2. Pull the handbrake while turning. 3. Slam the brakes while driving straight and then turn the steering wheel. 4. Slam the brakes while turning. 5. For a rear-wheel-drive car with sufficient power (or a four-wheel-drive car with a rear-wheel-drive bias), sharply press the accelerator and turn the steering wheel at a relatively low speed.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.