What is the normal tire pressure for Haval H6 in winter?

1 Answers
Giselle
07/30/25 5:19am
In winter, the appropriate tire pressure for a car is between 2.2 to 2.4 bar. Tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a significant role in the performance and power of the vehicle. The following are details about tire pressure: Introduction to Tire Pressure: Tire pressure, strictly speaking, refers to the air pressure inside the tire. Nowadays, many tires are not filled with air, and for these tires, the tire pressure requirements are quite strict. For tires filled with air, the pressure is related to seasonal changes. Additionally, tire pressure is closely linked to braking performance, affecting aspects such as comfort and load capacity, as well as the lifespan of the tire. Tire Pressure Selection: Tire pressure is an important factor affecting the service life and economy of tires. Choosing an unreasonable tire pressure can lead to power cycling, which increases tire wear and affects service life. Considering the impact on vehicle dynamics, it is essential to select the appropriate tire pressure to extend tire life and improve economy.
Was this review help?
17
2
Share
More Forum Discussions

Can a Tiptronic Transmission Shift Directly from 3rd Gear Back to D?

Yes, a Tiptronic transmission can shift directly from 3rd gear back to D gear. When driving an automatic transmission vehicle, you can freely switch between D2-D1-D while driving. Introduction to D Gear: The D gear is the most common gear in automatic transmission vehicles, usually located in the middle-rear position of the gear shift console, behind the N gear. Its purpose is to enable the vehicle to automatically select the appropriate gear while moving forward. The D gear is a forward gear, but forward gears are not limited to D; they also include M gear, S gear, L gear, and numerically labeled restricted gears such as 1st, 2nd, and 3rd. Driving gears include both forward and reverse gears, while the counterpart to driving gears is the neutral gear, which means no gear is engaged. Main Uses of D Gear: The D gear is the most widely used forward gear in automatic transmission vehicles. Its primary function is to allow the vehicle's transmission computer and accompanying mechanical structure to automatically select the appropriate gear in real-time while the vehicle is moving forward, thereby eliminating the need for manual gear shifting. This greatly liberates the driver's hands and feet, enhancing driving convenience, ease, and comfort.
6
5
Share

What is the optimal number of hours for driving practice per day?

The optimal duration for daily driving practice is four hours. Key considerations during driving practice: Quick eyes and fast feet/hands. Mastering clutch-throttle coordination during parking and starting phases, as well as following techniques at intersections, requires promptly placing the right foot on the brake pedal. Determine braking intensity based on the situation, followed by adjusting the vehicle's swing direction. The sequence, positioning, and coordination of these actions directly impact driving safety. Driving practice techniques: Using rearview mirrors, align with the midline of the vehicle ahead as a reference point. When half of the rear wheel crosses this line, turn the steering wheel fully for reversing. Return the steering wheel after the vehicle enters two-thirds of the parking space.
10
3
Share

Do new cars need an oil change in winter?

New cars do not require a special oil change for winter. There's no need to specifically switch to winter oil for new cars because manufacturers have already added the appropriate oil based on the sales region before the vehicle leaves the factory. Introduction to engine oil: Engine oil, also known as engine lubricant, has a density of approximately 0.91×10 (kg/m). It serves multiple functions for the engine, including lubrication and friction reduction, auxiliary cooling, sealing to prevent leaks, rust and corrosion prevention, and shock absorption. It is often referred to as the 'blood' of a car. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of lubricants, determining their fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, providing certain new characteristics. Additives are an essential part of lubricants. Impact of low temperatures on engine oil: At low temperatures, engine oil tends to thicken, making it difficult to flow smoothly, and in some cases, it may even stop flowing entirely. This requires more time for the oil to reach critical engine components to provide lubrication and protection. If the vehicle is driven immediately after starting, it can lead to dry friction. Over time, this can damage the internal cylinder walls, causing abnormal engine noises, severe idle vibration, and even oil burning phenomena.
7
0
Share

Is It Normal for the Oil Dipstick to Reach the Lower Limit at 5,000 Kilometers?

When the car's oil dipstick drops by 1 centimeter after 5,000 kilometers, it does not indicate oil burning and is considered normal. Hazards of High Oil Temperature: Prolonged exposure to high temperatures can cause engine oil to corrode and age, thinning the oil film and making it more likely to enter the combustion chamber. Using high-quality oil can significantly delay this phenomenon. Carbon deposits are an inevitable byproduct of fuel combustion and are the root cause of various car issues, such as aging valve seals and increased piston-cylinder wall gaps. Consequences of Engine Oil Burning: If the oil level is too high (exceeding the maximum mark), excess oil can easily enter the combustion chamber (due to excessive internal pressure), forming sticky carbon deposits. While initial impacts may not be noticeable, over time, the buildup of carbon deposits will inevitably worsen.
20
0
Share

How many hours can I practice for Subject 2 each day?

Normally, the maximum accumulated practice time for Subject 2 is 4 hours per day. Basic test items for Subject 2: Post parking, slope fixed-point parking and starting, parallel parking, passing single-plank bridge, curve driving, right-angle turning, speed-limited passing through restricted-width gate, passing continuous obstacles, hundred-meter gear shifting, and bumpy road driving. Subject 2 examination rules: All five test items must be passed at once for the examination to be considered successful. There are a total of two examination opportunities, meaning one initial test and one make-up test. If the first test is failed, a make-up test is conducted immediately. Those who fail the make-up test must wait 10 days to schedule the examination again. After the examination, candidates must leave the examination area promptly and must not interfere with the examination.
2
4
Share

Is Engine Oil a Hazardous Substance?

Engine oil is not a hazardous substance. According to the national standard GB6944-2012 "Names and Numbers of Hazardous Goods and Products," common hazardous chemicals are classified into seven categories based on their primary hazardous characteristics: the first category is explosives; the second category is compressed gases and liquefied gases; the third category is flammable liquids; the fourth category is flammable solids, substances liable to spontaneous combustion, and substances emitting flammable gases when wet; the fifth category is oxidizing substances and organic peroxides; the sixth category is toxic substances; and the seventh category is corrosive substances. Engine oil, also known as engine lubricant, is composed of base oil and additives, with base oil being the main component of lubricants. Engine oil is used for lubricating internal combustion engines, with its primary functions being to reduce friction and wear on moving parts, remove sludge and varnish from the engine, neutralize acids produced by fuel and lubricant oxidation, improve piston ring sealing, and cool the engine by carrying away heat from moving parts. The roles of engine oil include: cooling and temperature reduction; sealing and leak prevention; cleaning; shock absorption; lubrication to reduce wear; rust and corrosion prevention; and component protection.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.