···
Log in / Register

What is the normal tire pressure for Emgrand?

4 Answers
VonBlakely
07/29/25 11:34pm

The normal tire pressure range for Emgrand is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. Emgrand's TPMS tire pressure monitoring system does not display the specific pressure and temperature values for each tire, but only shows a TPMS warning symbol and an abnormal tire pressure warning symbol. These two symbols are located on the instrument panel below the front of the driver's seat. If the tire pressure monitoring indicator lights up (a yellow symbol, an irregular circle without a seal on top, with four small spikes at the bottom and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually, it will trigger an alarm if the pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged while driving, it can also cause the tire pressure warning light to illuminate. For sensor damage, the only solution is to replace it with a new component.

Was this review help?
6
2
Share
VanReese
08/16/25 2:31am

The normal tire pressure for the Emgrand generally ranges between 2.2 and 2.5 bar, depending on the model and tire type. When driving my Emgrand, I always make it a habit to check the label on the door frame first, as it shows the manufacturer-recommended pressure. For example, my 2019 model has a standard pressure of 230 kPa for the front tires and 240 kPa for the rear tires. I measure the tire pressure once a month using a regular tire pressure gauge, which saves me the hassle and expense of going to a repair shop. Low tire pressure can cause excessive tire wear and increase fuel consumption, while high pressure reduces grip and makes the car more prone to skidding in wet conditions. Before long highway drives, I always set a reminder on my phone app to check the tire pressure, as incorrect pressure can increase the risk of a blowout. When switching to winter tires, I slightly increase the pressure to around 2.3 bar for better safety on icy or snowy roads. Remember, never rely on guesswork when inflating tires—always use a tool to measure precisely, or you’ll waste effort and potentially damage your car.

Was this review help?
5
0
Share
Expand All
RubyMarie
10/19/25 2:50am

As a seasoned driver with over a decade of experience, I believe the tire pressure management of the Emgrand should be adjusted based on practical conditions. The normal range is 2.2 to 2.5 bar, but fine-tuning is necessary depending on the situation. For example, during hot summer days when air expands, I usually reduce it to 2.2 bar, while in winter, I inflate it slightly higher to 2.4 bar to prevent freezing and hardening. Pay attention to the load as well—when the back seats are fully occupied, I increase the rear tire pressure a bit to 2.4 bar for better support. The checking method is simple: just use a tire pressure gauge, and don’t wait until the tires wear out to regret it. Abnormal tire pressure can cause unusual noises or steering wheel vibrations—I’ve personally experienced an extra trip to the repair shop due to forgetting to check. During every maintenance session, take a moment to inspect the tire pressure sensors to ensure they’re functioning properly. Maintaining the correct tire pressure long-term can extend tire life by tens of thousands of kilometers, saving both money and hassle.

Was this review help?
18
4
Share
Expand All
SanKendra
12/02/25 3:25am

I just bought a new Emgrand, and tire pressure is quite important. The normal value is around 2.2 to 2.5 bar, as clearly stated in the manual. As a newbie, I tend to overlook details, so now I use a simple tire pressure gauge to check once a month, ensuring the pressure stays within the recommended range. If it's too low, the tires deflate quickly and wear out faster; if it's too high, the ride becomes uncomfortable, affecting comfort. During my daily commute, I always worry about a flat tire, especially on rainy and slippery days—incorrect tire pressure can be very dangerous. I've learned to use the self-service air pump at gas stations, setting it to around 230 kPa, which is simple and safe. Keeping a small tire pressure gauge in the car costs just a few bucks, making it easy to check anytime. Paying attention to tire pressure also saves fuel, reducing gas expenses and making life a bit easier. In short, a small effort keeps the car running smoothly.

Was this review help?
16
3
Share
Expand All
More Forum Discussions

What does 48v20ah mean?

48v20ah means an output voltage of 48V (volts) and an output capacity of 20Ah (ampere-hours). Here is some information about battery voltage and capacity output: 1. Type: Most electric vehicles are equipped with lead-acid batteries, which are cost-effective and offer a good balance between price and performance. These batteries can be recharged and reused, hence the name "lead-acid battery." 2. Principle: The charging and discharging process of a lead-acid battery involves electrochemical reactions. During charging, lead sulfate forms lead oxide, and during discharging, lead oxide is reduced back to lead sulfate.
3
4
Share

What are the impacts of replacing a car door on a new vehicle?

Since car doors are not considered wear-and-tear parts, any replacement would reasonably suggest prior collision damage, classifying the vehicle as accident-involved which depreciates its value. If sold as a used car, the price would be discounted. Below are key points about door replacement: 1. Cost: Replacement costs vary by model and depend on whether using OEM or aftermarket parts. 2. Effects: Post-replacement, the vehicle's sound insulation may degrade, and sealing performance could deteriorate.
11
4
Share

How to Release the Handbrake on a Mercedes-Benz?

Mercedes-Benz vehicles are equipped with electronic handbrakes. When parking, simply press the gear lever inward lightly to engage it. Below is some information about the Mercedes-Benz handbrake: 1. Function: The electronic handbrake, also known as the Electronic Parking Brake (EPB) system, integrates temporary braking during driving with long-term parking braking, all controlled electronically. 2. Application: Currently, there are two main types of electronic parking brake technologies used in vehicles: one is the cable-pull type electronic parking brake system, and the other is the caliper-integrated electronic parking brake system.
10
0
Share

What car series is the Excelle?

Excelle is an American car series, a compact car under the SAIC-GM joint venture. The vehicle dimensions are 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. It features a MacPherson strut front suspension and a multi-link independent rear suspension, with front-wheel drive configuration. Under the hood, the Buick Excelle is powered by a 1.4T DVVT turbocharged engine, delivering a maximum horsepower of 163 HP, peak power of 120 kW, and maximum torque of 230 Nm, paired with a 6-speed automatic transmission.
9
2
Share

How to Make Blurry Car Glass Clear Again?

Here are methods to restore clarity to blurry car glass: 1. Apply anti-fog spray: When using a defogger, simply spray it evenly on the glass surface and wipe clean with a dry towel. This leaves a protective film that alters water molecules' surface tension, causing fog droplets to coalesce into larger beads that don't obstruct vision. This method also works for other car glass, especially side mirrors. 2. DIY detergent defogger: Mix dish soap and water in a 1:6 ratio, spray and wipe before driving. The effect matches commercial defoggers though with slightly shorter duration. Alternatives like soapy water, hand soap, or laundry detergent are less effective than dish soap.
17
1
Share

How Long Does a Timing Chain Last Before Replacement?

Timing chains typically require replacement after approximately 150,000 to 200,000 kilometers of use. Compared to timing belts, timing chains offer a longer service life and lower failure rates. Even when a timing chain reaches the end of its lifespan, it doesn't fail immediately but gradually stretches. The consequence of this elongation could potentially lead to valve interference, resulting in engine instability, poor acceleration, or even skipped teeth causing engine malfunctions. The primary function of a timing chain is to drive the engine's valve train, ensuring the intake and exhaust valves open and close at the correct times to maintain proper cylinder breathing. Compared to traditional belt-driven systems, chain-driven mechanisms provide more reliable power transmission and superior durability.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.