What is the normal tire pressure for Buick Excelle?

3 Answers
Genesis
07/28/25 8:34pm
The normal tire pressure range for the Buick Excelle is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The method to check the tire pressure in the Excelle is: press the menu button to switch to the vehicle information menu, rotate the knob at the top of the left lever to the tire pressure monitoring information interface, and you can see the tire pressure of all four wheels. Generally speaking, a tire pressure above 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: reduced friction and adhesion of the tires, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating wear on the central tread of the tire, reducing tire lifespan; increased body vibration, indirectly affecting the lifespan of other components; excessive stretching of the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: increased friction coefficient with the road surface, leading to higher fuel consumption; causing heavy steering and deviation, which are unfavorable for driving safety; increased movement of various parts of the tire, leading to abnormal heating due to excessive rolling; reduced functionality of the cords and rubber, causing delamination or cord breakage and excessive friction with the rim, leading to damage and abnormal wear at the bead area; multiplied friction between the tire and the ground, sharply increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol, an irregular circle with no stamp on top and four small spikes at the bottom, with an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: usually alerts when below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: after inflating the tires, the tire pressure was not reset in time, causing the tire pressure monitoring system to still record the previous data, and the tire pressure monitoring indicator light will come on. At this time, simply perform a tire pressure reset. Damaged tire pressure sensor: the tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the sensor is damaged during driving, it will also cause the tire pressure warning light to come on. For sensor damage issues, only a new replacement part can be used.
Was this review help?
13
1
Share
SophiaFitz
08/12/25 12:17am
I always prioritize driving safety, and tire pressure is particularly crucial for the Buick Excelle. The recommended normal range is between 32 and 35 PSI, with the specific value indicated on the label on the driver's side door frame. If the tire pressure is too low, the tires are prone to overheating and blowouts; if the pressure is too high, traction weakens and braking distances increase. I make it a habit to check every two weeks, preferably using a tire pressure gauge when the car is cold, as driving heats up the tires and affects the readings. Seasonal changes also matter—in winter, a slightly higher pressure of 35 PSI is fine, while in summer, a slightly lower 32 PSI helps avoid bumps. During regular maintenance, the 4S shop can assist with adjustments, but doing it yourself is simple, convenient, and prevents problems before they arise. Never wait until an issue occurs to regret neglecting it.
Was this review help?
12
3
Share
Expand All
LolaMarie
09/30/25 7:33am
Fuel efficiency is my small goal, and tire pressure settings directly affect the fuel consumption of the Buick Excelle. The standard tire pressure is around 35 PSI. Maintaining the correct value ensures smoother tire rolling, reduces engine load, and saves over 5% on fuel. I record it in my phone reminders to measure it monthly, which can be easily done with a simple tire pressure gauge. In summer, when temperatures rise and pressure exceeds 35 PSI, I release some air to avoid excessive wear and improve comfort. Paying long-term attention to tire pressure ensures even wear, extends tire life by two years, saves money, and is eco-friendly. Safe driving starts with this detail.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

What is the real reputation of the Envision 1.5T?

About the real reputation of the Envision 1.5T, the relevant introduction is as follows: 1. Advantages: The 1.5T Envision offers high cost performance, and its power can meet household needs. It comes with abundant configurations, including standard features such as 6 airbags, tire pressure monitoring, ESP, cruise control, hill start assist, panoramic sunroof, keyless system, multifunction steering wheel, active noise cancellation, automatic headlights, power-folding mirrors, and automatic air conditioning. 2. Disadvantages: The 2.0T model has relatively high fuel consumption, with an average real-world fuel consumption of around 12-13L. The 1.5T model has issues with its powertrain; it is paired with a dual-clutch transmission, which causes jerky gear shifts at low speeds and noise problems. Additionally, the maintenance costs are relatively high.
8
1
Share

Can Sinopec and Shell gasoline be mixed?

Gasoline can be mixed, and here are the relevant details: Gasoline can be mixed: For gasoline from different companies, the country has strictly standardized the main components of additives in gasoline. Even if mixed, it will not cause harm. In emergency situations, Sinopec and PetroChina gasoline can be mixed occasionally, but from a long-term perspective, it is not recommended to mix gasoline from different oil companies. Gasoline composition: The main components of gasoline are C5-C12 aliphatic hydrocarbons and cycloalkanes, as well as a certain amount of aromatic hydrocarbons. Gasoline has a high octane number (anti-knock combustion performance) and is classified into grades such as 89, 92, and 95 based on the octane number. Gasoline is produced by refining different gasoline components obtained from petroleum refining, such as straight-run gasoline components, catalytic cracking gasoline components, and catalytic reforming gasoline components, and then blending them with high-octane components. It is mainly used as fuel for spark-ignition internal combustion engines in automobiles.
6
4
Share

How to Choose SUV Tires?

Here are the detailed introductions and selection methods for SUV tires: 1. HT Tires: Highway Terrain tires, mainly used for urban SUV models driving on paved roads. Paved roads can be simply understood as cement and asphalt surfaces, while unpaved roads refer to gravel and mud roads. HT off-road tires are primarily designed for urban SUV models, ensuring comfort and stability for city SUVs. 2. AT Tires: AT (All-Terrain) tires, also known as all-terrain off-road tires, allow SUVs equipped with these tires to perform well on both paved and unpaved roads. AT tires have more prominent off-road capabilities compared to HP tires. AT tires feature larger tread blocks and deeper longitudinal and lateral grooves than HT tires, with relatively harder rubber in the tire body. 3. MT Tires: MT (Mud-Terrain) tires have a very distinct off-road style compared to HT and AT tires. Their tread patterns are very exaggerated, with large tread blocks and deep, wide longitudinal and lateral grooves. Mud-Terrain refers to muddy road conditions, and they can also be called mountain off-road tires.
12
5
Share

What is the oil from tire pyrolysis used for?

Tire pyrolysis oil has a high calorific value and can directly replace fuel oil for industrial or boiler heating purposes, such as in cement plants, steel mills, glass factories, etc. It can also be refined into diesel for use in diesel power plants, heavy machinery, and agricultural machinery. Here is some extended information about automotive tires: 1. Impact of tire size on vehicles: Tire size affects a car's acceleration, stability, and fuel consumption. The relationship between tire size and driving speed is complex. Small-displacement vehicles may struggle to move if fitted with oversized tires due to insufficient power, while large-displacement vehicles may have their power output limited by excessively small tires, affecting speed. Bigger and wider tires are not necessarily better. When driving on bumpy roads or over speed bumps, oversized tires can easily cause friction interference with the wheel arches. 2. Functions of tires: Tires transmit driving force, braking force, and steering force to enable vehicle operation; they support vehicle loads; and they mitigate and absorb vibrations and impacts during driving to prevent severe vibrations from damaging automotive components.
3
1
Share

What is the difference between shaft drive and chain drive?

The differences between shaft drive and chain drive are as follows: 1. Different transmission efficiency: The mechanical efficiency of shaft drive gears exceeds 99%, while that of chains is only 95%. In other words, when the same force is applied to the same bicycle, a shaft-driven bicycle can travel farther than a chain-driven one. 2. Different lifespan: The service life of shaft drive gears is several times longer than that of chain drives, with a mileage that can reach hundreds of thousands of kilometers, generally requiring no maintenance for 10 years. In contrast, chain-driven bicycles will inevitably experience chain elongation and breakage after a period of use. 3. Different lubrication environments: The gears of a shaft-driven bicycle are enclosed in a sturdy cast aluminum alloy shell, with the entire transmission system operating in a fully sealed environment where mud and sand cannot enter. It comes with oil rust and lubricating oil, and the oil will not leak out. On the other hand, the chain of a chain-driven bicycle is partially exposed during operation, making it easy for lubricants to leak out. Therefore, in most cases, chains without lubricating oil are prone to rust.
9
4
Share

Is it better to use 92 or 95 octane gasoline for the Geely Vision?

Geely Vision is equipped with a 1.5-liter naturally aspirated engine across the entire lineup, so this vehicle can use 92 octane gasoline. Gasoline with different octane ratings has different levels of octane; the higher the octane rating, the higher the octane value, and gasoline with higher octane values is more stable. Generally, 92 octane gasoline is sufficient for naturally aspirated engines in family cars. Here is some information about the Geely Vision: 1. The Geely Vision is a compact sedan under the Geely brand. Its 1.5-liter naturally aspirated engine delivers 109 horsepower and a maximum torque of 142 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4400 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The Geely Vision's engine is paired with either a 5-speed manual transmission or a CVT. The CVT is a common type of automatic transmission that is very suitable for family cars. The front suspension of the Geely Vision uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.