···
Log in / Register

What is the normal tire pressure for BMW G28?

4 Answers
LeahLee
07/30/25 12:15am

The normal tire pressure for BMW G28 ranges from 2.2 to 2.5 bar. Tire pressure refers to the air pressure inside the tires, and its level plays a crucial role in the performance and power of the vehicle. Maintaining the correct tire pressure ensures the proper functioning of the car during use. Abnormal tire pressure can lead to irregular driving conditions. If the tire pressure is too high, the contact area between the tire and the ground decreases, increasing the pressure per unit area on the tire. Driving on rough roads with high tire pressure can raise the risk of tire blowouts due to road protrusions, compromising driving safety. Conversely, if the tire pressure is too low, the contact area with the ground increases, causing the tires to generate excessive heat during driving. Prolonged driving with low tire pressure can result in deformation of the tire's inner side, shortening the tire's lifespan and increasing fuel consumption.

Was this review help?
12
2
Share
LaLiam
08/16/25 4:28am

I just bought a BMW G28 and usually drive it in the city and on highways. The normal tire pressure is around 2.3 to 2.5 bar. I checked the owner's manual, which recommends about 2.4 bar for the front tires and 2.5 bar for the rear tires. Once, I forgot to check the pressure, and it was a bit low. As a result, the car felt a bit floaty on the highway, and fuel consumption increased. Since then, I’ve developed a habit of checking the pressure myself every week: I keep a digital tire pressure gauge in the glovebox and use gas station equipment to ensure even inflation. Remember, don’t let the pressure drop below 2.2 bar, or tire wear will accelerate. In hot weather, the pressure may rise slightly, and in winter, a slight drop is fine, but adjustments should be made promptly. BMW’s iDrive system can display tire pressure status, which is quite convenient. Safety first—keeping the pressure within this range reduces the risk of a blowout.

Was this review help?
16
2
Share
Expand All
Blanco
10/19/25 6:53am

Having driven the BMW G28 for a while, I believe the proper tire pressure depends on the vehicle configuration and load conditions. Generally, the manual recommends around 2.4 bar, which may increase to 2.6 bar when fully loaded or carrying cargo. Excessive tire pressure reduces grip, making the car prone to skidding during turns, while insufficient pressure increases rolling resistance, accelerating wear and fuel consumption. During every maintenance visit, I ask the technician to check the tire pressure with a professional gauge for more accurate readings. The difference between front and rear tires is minimal: rear-wheel-drive models typically have slightly higher pressure in the rear tires. Temperature fluctuations significantly affect tire pressure, with a common 3% drop in summer and 2% rise in winter. For daily driving, maintaining a range of 2.3-2.5 bar is optimal, and checking before highway driving ensures stability. The app or tire pressure monitoring system provides real-time alerts, which is highly practical.

Was this review help?
11
5
Share
Expand All
CooperAnn
12/02/25 7:33am

Recently got a BMW G28, as a new driver I'm not very familiar with tire pressure. Friends said the normal range is about 2.3 to 2.5 bar. The manual clearly indicates it, and it's quite convenient to inflate accordingly. Too high and it feels uncomfortably stiff, too low and the car feels shaky. Just buy a small tire pressure gauge and check it whenever you wash the car. Keeping it within the safe range reduces the chance of accidents. BMW's design is simple, you can check tire pressure values via the APP without frequent visits to the repair shop. After learning these basics, driving becomes more reassuring.

Was this review help?
11
1
Share
Expand All
More Forum Discussions

What is the process of Chongqing Subject 3 driving test?

Subject 3 test process is as follows: 1. Pre-start vehicle inspection: In-vehicle test preparation (adjusting seats, mirrors, etc.). In these two steps, it is important not to forget to wear the seat belt. The seat belt buckle has two interfaces; find the one with wires. Quickly adjust your mindset during these steps. 2. Starting: Once you are ready, the examiner will start the test software, and you need to follow the voice commands. When starting, turning on the signal light and honking are essential, and you must also check the rearview mirrors. The clutch feel may vary between cars, so you can use the throttle to start and slowly release the clutch once the car moves. 3. Road driving: Road driving includes shifting gears, driving straight, turning, making U-turns, changing lanes, etc. These tasks are relatively simple, but you need to operate according to actual road conditions. Stopping midway is also allowed. 4. Overtaking: Usually, the computer prompts overtaking, and often there are no cars ahead. The main focus is executing the overtaking steps. 5. Intersections, schools, bus stops, etc.: This task mainly involves slowing down before reaching an intersection and checking for oncoming traffic or traffic lights from both sides. Drive according to the actual situation. Note that you cannot stop while passing through an intersection. 6. Night driving: In some places, this is simulated before departure, while in others, it is an actual test conducted at night. The main task is to repeat the above items at night and include light operations. 7. Pulling over: Once all tasks are completed, the examiner will instruct you to pull over.
14
1
Share

Where is the Audi Menu Button Located?

Audi menu button is located on the control panel of the instrument cluster, marked with "CAR", which serves as Audi's menu button. Introduction to the CAR button: The Audi CAR button provides access to the vehicle system settings interface, featuring functions including seat and air conditioning adjustments, checking oil level, viewing maintenance mileage, electronic stability control system, driving mode selection, parking assist settings, and other services related to vehicle components and driving. Audi MMI System: Through the MMI system, drivers can control every electronic device and functional component in the vehicle. From adjusting audio volume to utilizing GPS navigation, Audi's comprehensive range of luxury and comfort features can be perfectly realized via the MMI system.
17
1
Share

What Causes an Automatic Transmission Car to Stall at Idle While Waiting at a Red Light?

Engine auto start-stop function automatically shuts off the engine when the vehicle comes to a temporary stop during driving (such as waiting at a red light). When it's time to move forward again, the system automatically restarts the engine. Below is relevant information: Disadvantages: The initial design purpose of auto start-stop technology was to save fuel. When the auto start-stop function is activated, the engine enters a "dormant" state during brief stops, the pulley stops rotating, and the system minimizes engine idling. Working Principle: The auto start-stop system is an onboard computer-controlled system that automatically starts and stops the engine. This system requires the installation of a starter with auto start-stop capability on the engine.
3
3
Share

What is a Car Side Skirt?

Car side skirts are part of the vehicle's body kit formed by the front and rear bumpers, belonging to a type of wide body kit. They function as external spoilers on the car body, originating from motorsports. Below is relevant information about car side skirts: 1. Function: They reduce the reverse airflow generated during driving while increasing the car's downforce, making high-speed driving more stable. 2. Design Concept: Car side skirts emphasize aesthetic coordination and personalization in appearance. In today's era of increasing pursuit for individuality, wide body kits are the most visible car modification parts that offer numerous appearance changes and easy installation.
3
0
Share

What is the weight of the Subaru Outback?

Subaru Outback has a total weight of 2040 kg. Dimensions are 4817mmX1840mmX1673mm. Exterior of the Subaru Outback: The front grille features a glossy black design, enhancing the car's muscular appearance. It can automatically open and close based on driving conditions to reduce air resistance and improve fuel economy. Interior of the Subaru Outback: The size of the central control display has been increased, and the diameter of the leather steering wheel has been reduced, making it easier for the driver to handle. The dashboard uses white ambient lighting, and the waterproof-treated fabric seats further enhance passenger comfort.
7
3
Share

What is the fuel consumption of GAC Gonow Xinglang?

The fuel consumption range of GAC Gonow Xinglang is 7.2-12.0L/100KM. The MIIT comprehensive fuel consumption is 7.5L/100KM. Methods to reduce fuel consumption: You can add fuel additives (fuel system cleaner) to the fuel tank to improve combustion and remove carbon deposits. It is also recommended to perform regular vehicle inspections and maintenance, and clean or replace the three filters (air filter, oil filter, and fuel filter), which is beneficial for fuel economy, meaning it will help reduce fuel consumption. Driving tips: Generally, fuel consumption is mainly determined by the driver's habits. Avoid prolonged idling, and when waiting at traffic lights, you can turn off the engine and engage the handbrake, or use the auto start-stop function.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.