What is the normal tire pressure for a regular car?

When to Use ECO Mode?

ECO mode is used when you want to reduce unnecessary fuel consumption, and it can be used in urban congested roads or on highways. ECO mode is the energy-saving mode of a car. When ECO mode is activated, the vehicle will make adjustments: the throttle opening corresponding to the same accelerator pedal depth will be smaller, and the transmission will shift up earlier. The purpose is to control the engine speed through reasonable gear selection, thereby reducing unnecessary fuel consumption. Below are specific details about ECO: ECO is an English abbreviation, formed from the words Ecology (environmental protection), Conservation (energy saving), and Optimization (power). ECO mode is further divided into active ECO driving mode and passive ECO driving mode. When the ECO indicator light on the dashboard lights up, it indicates that the vehicle's economy mode has been activated. ECO mode is divided into active and passive types. The difference lies in the fact that the active type has its own button, allowing the driver to choose whether to activate it. When the driver presses the ECO mode switch, the dashboard indicator light will immediately illuminate, and the vehicle will automatically start adjusting settings, such as throttle opening, transmission shift logic, and air conditioning output power. The passive ECO mode does not have a dedicated button. When the dashboard ECO indicator light comes on, it is only a reminder function. ECO will automatically assess your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the ECO indicator light.

2

Share

What does 101W tire mean?

101W tire meaning: 101 refers to a maximum load capacity of 825KG, and W indicates a speed rating of 270KM/H. More information about tires is as follows: 1. Tires are circular elastic rubber products mounted on various vehicles or machinery for ground contact and rolling. 2. When replacing tires, it is necessary to use tires with the same size, speed rating, and load capacity as the original tires. 3. Tires help prevent severe vibrations and early damage to vehicle components, adapt to the high-speed performance of the vehicle, reduce noise during driving, and ensure driving safety, handling stability, comfort, and fuel economy. 4. Tires are often used under complex and demanding conditions and must have high load-bearing, traction, and cushioning performance.

9

2

Share

What to Pay Attention to During the Probationary Period of a Driver's License

Precautions during the probationary period of a driver's license: 1. Driving alone on highways is not allowed during the probationary period. A driver in the probationary period cannot drive alone on highways and must be accompanied by a driver with more than 3 years of driving experience in the passenger seat; otherwise, a fine of 200 yuan will be imposed. 2. Failure to display a "Probationary" sign on the rear of the vehicle will result in a 200 yuan fine. On one hand, drivers in the probationary period must display a "Probationary" or "New Driver" sign on the rear of the vehicle. Not displaying it will lead to a 200 yuan fine. On the other hand, they are absolutely prohibited from driving commercial vehicles, ambulances, rescue vehicles, and other special vehicles. 3. Accumulating 12 points on the license during the probationary period will result in its revocation. The penalties during the probationary period are no different and are imposed according to the "Regulations for the Implementation of the Road Traffic Safety Law" for traffic violations. However, it is important to note that accumulating 12 or more points during the probationary period will directly revoke the driving qualification for the permitted vehicle type. Once the license is revoked, the driver must reapply, take the tests, and obtain a new driver's license.

17

1

Share

What happens if a red light violation is not handled promptly?

If a red light violation is not addressed, the motor vehicle will fail its annual inspection. If a motor vehicle fails to obtain the inspection qualification mark three consecutive times, it will be mandatorily scrapped. Running a red light violates the relevant provisions of the Road Traffic Safety Law. If the violation remains unaddressed, according to the "Motor Vehicle Registration Regulations": "The owner of a motor vehicle may apply for the inspection qualification mark at the vehicle management office of the registration location within three months before the expiration of the vehicle's inspection validity period. Before applying, the owner must resolve all road traffic violations and accidents related to the vehicle." Therefore, if a red light violation is not handled, the vehicle cannot pass the annual inspection. Methods to avoid running a red light while driving: When there is an arrow signal light, follow the arrow light; otherwise, follow the circular light. When the red light is on, the front of the vehicle must not cross the stop line. When the yellow light is on, the front of the vehicle must not cross the stop line. When the green light just flashes, if you are close and moving fast, you should proceed, as braking might not stop you in time to avoid crossing the stop line. If you are far away, moving slowly, or the intersection is congested, you should stop. When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line at an intersection.

19

1

Share

How to use the low-range four-wheel drive on the Haval H5?

The method for using the low-range four-wheel drive on the Haval H5 is as follows: 1. When the Haval H5's four-wheel drive speed is below 30km, maintain a straight line and shift into gear. 2. To engage 4L, stop the vehicle, shift into neutral, press the clutch, shift from the engaged four-wheel drive into 4L, then shift gears and move the vehicle slightly forward or backward. Wait until the computer displays the 4L icon, indicating the gear shift is complete. The process for disengaging is the same, shifting from 4L to four-wheel drive and then to two-wheel drive. For specific operations, please refer to the vehicle's manual. 3. Additional information: The four-wheel drive structure of the Haval H5 is relatively simple, with a central transfer case commonly found in rugged SUVs, equipped with a low-range four-wheel drive gear with a gear ratio of 2:1.

7

2

Share

How to Turn Off Cruise Control in a Car?

To turn off the cruise control in a car, follow these steps: 1. Press the brake pedal or clutch pedal to temporarily deactivate the system. 2. To completely shut down the cruise control system, slide the switch to the "OFF" position, or turn off the ignition when the car is stationary. This will clear all stored values and fully deactivate the system. Additional information about cruise control: 1. Cruise control is also known as speed control, automatic driving system, or constant speed regulator. 2. The function of cruise control: Once activated at the desired speed set by the driver, it automatically maintains that speed without requiring the driver to press the accelerator pedal, allowing the vehicle to travel at a constant speed.

17

3

Share

What is the normal tire pressure for a regular car?

When to Use ECO Mode?

What does 101W tire mean?

What to Pay Attention to During the Probationary Period of a Driver's License

What happens if a red light violation is not handled promptly?

How to use the low-range four-wheel drive on the Haval H5?

How to Turn Off Cruise Control in a Car?

What Causes Severe Engine Shaking During Startup?

What Are Some Simple Methods to Remove Car Stickers?

What Items Should Be Placed in a New Car?

How to Check if a Car Compressor is Good or Bad?