What is the normal temperature range for car coolant?

1 Answers
VonAriana
07/24/25 11:39pm
Car coolant temperature normally maintains between 80~100℃. More information about car coolant temperature is as follows: 1. Within a certain range, the normal temperature is 90℃, when the engine's working temperature has stabilized and reached its optimal operating state. 2. After starting the vehicle, the antifreeze temperature rises rapidly. When the pointer reaches the central position, the heat exchange balances and the antifreeze temperature stops rising. The best time to start moving is when the temperature reaches the middle position, which is why vehicles need to warm up before driving. 3. Overheating on the temperature gauge may indicate cooling system malfunctions, mainly including fluid leakage, insufficient coolant, cooling fan failure, or circulation pump failure.
Was this review help?
10
5
Share
More Forum Discussions

Does Reversing in D Gear on an Uphill Damage the Car?

Reversing in D gear on an uphill can damage the car's transmission and may also result in a collision with the vehicle behind. Here are specific details about precautions to take on an uphill: Preventing Rollback: Starting on a slope with an automatic transmission isn't entirely automatic. When an automatic car is in D gear and the brake is released, there is a certain amount of forward torque that prevents movement while the brake is applied. Upon releasing the brake, the car will gradually start moving. Therefore, on a gentle slope, the car won't roll back. However, on a steep slope, the idle forward torque isn't sufficient to counteract the vehicle's weight, and the car will definitely roll back. The method to start on a slope is to accelerate immediately after releasing the brake, which can stop the slight rollback and allow the car to move forward. Be cautious of the distance to the vehicle in front. Stalling During the Process: Stalling in D gear on an uphill occurs because the slope is too steep, and the transmission ratio in D gear is insufficient. In such cases, it's necessary to shift to 2nd gear or even 1st gear. These lower gears have a higher transmission ratio and greater torque, enabling the engine to overcome the vehicle's weight on a steep slope, maintain engine speed, and prevent stalling.
1
3
Share

What is the fuel tank capacity of the Lexus 570 in liters?

Lexus LX570 has a total of 3 models, all with a fuel tank capacity of 138 liters. The vehicle is equipped with a 5.7L 367 horsepower V8 engine and an 8-speed automatic transmission (AT). Among vehicles in the same class, the Lexus LX 2019 570 Luxury Premium Edition, 570 Peak Special Edition, and 570 Dynamic Luxury Edition all have a fuel tank capacity of 138 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety limit, and there is still some space from the safety limit to the tank opening. This space is designed to allow for fuel expansion when the temperature rises, preventing overflow from the tank. If fuel is added up to the tank opening during refueling, the actual refueling amount may exceed the calibrated tank capacity. If the owner wants to know the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it indicates low fuel, and when it is close to F, it indicates sufficient fuel.
9
5
Share

Do I Need to Go to the DMV for a Biannual Vehicle Inspection?

For vehicles that meet the exemption requirements, new cars do not need to undergo an on-site inspection at the DMV every two years. Instead, you can simply apply for the inspection compliance mark on the Traffic Safety Comprehensive Service Management Platform or the Traffic Management 12123 App. Once approved, you can view the electronic inspection mark certificate at any time to check the vehicle’s annual inspection status, eliminating the need to display a paper inspection mark. Non-commercial small and micro passenger vehicles (with no more than 9 seats) enjoy a 6-year exemption from on-site inspections. Therefore, within the first 6 years of a new car, you only need to apply for the inspection compliance mark every 2 years. Note that the following situations are not eligible for the exemption: minivans, vehicles illegally modified and penalized by law, vehicles involved in accidents causing injuries or fatalities, and vehicles that have not been registered for over 4 years since the date of manufacture. Method to apply for the inspection compliance mark for a new car every two years: Open the Traffic Management 12123 App, click "More," and select "Apply for Inspection Compliance Mark for Exempt Vehicles." Note that any outstanding traffic violations must be resolved before applying. Click "Continue," confirm the information, and proceed to the next step. Upload photos of the compulsory traffic insurance certificate and vehicle tax, then enter the verification code and submit. Once the application is successfully submitted, click "View Progress" to check the online processing status in real-time.
6
5
Share

What are the reasons for the ETC barrier not lifting?

The integrated device in the vehicle is damaged. The ETC system at the toll station is malfunctioning. The bank card linked to the vehicle's ETC is blacklisted. In this case, you need to use the manual lane to pass through the toll station or highway entrance. ETC usage precautions: The ETC transaction sensing range is 8 meters. When the vehicle in front stops, to prevent the front vehicle's ETC device from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and paying for the front vehicle. The ETC lane recognizes vehicles at a speed of 20km/h. If the speed is too fast, the vehicle device information cannot be read, leading to failed deductions. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, will cause the electronic tag to fail. It can be taken to the bank where the ETC card was issued or the highway service office for inspection. If the loosening or falling off is not due to human factors, it only needs to be reactivated. When using a debit card linked to ETC, insufficient balance will also cause deduction failures. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Thick car windshield causing poor sensing. Especially for vehicles that have had accidents and replaced the windshield, or those with modified front windshields, need to be cautious.
9
4
Share

Where is the Tire Pressure Reset for Haval Big Dog?

The tire pressure reset button for Haval Big Dog is located on the menu on the left side of the steering wheel. Hazards of Overinflated Tires: Reduced friction and adhesion of tires, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, causing internal cracks or blowouts. Hazards of Underinflated Tires: Increases friction with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement of tire components, leading to abnormal heat generation due to excessive rolling; Weakens cord and rubber functionality, causing delamination or cord breakage, and excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to blowouts; Increases tire deformation, causing sidewall cracks and flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage, while also enlarging the tire contact area and accelerating shoulder wear.
19
3
Share

Should I use auto or low beam at night?

You can use either auto or low beam at night, because if you switch the light control knob to the auto position, the headlights can automatically switch between high beam and low beam. Auto refers to automatic headlights, which are driving lights that can turn on automatically. Automatic headlights use a photosensitive sensor to detect the intensity of light and decide whether to turn on the headlights. Automatic headlights are controlled by a central intelligent control box that determines changes in light brightness based on a light sensor located behind the interior rearview mirror, automatically turning on or off the parking lights and low beams. The advantage of automatic headlights is that they can independently turn on and off the headlights based on the intensity of ambient light.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.