What is the normal temperature gauge reading for a Prado?

1 Answers
LenaMarie
07/29/25 3:50pm
The normal temperature gauge reading for a Prado is 90 degrees Celsius. The temperature gauge displays the coolant temperature, allowing the owner to monitor the vehicle's condition. The Prado has the following dimensions: length 5010mm, width 1885mm, height 1890mm, wheelbase 2790mm, minimum ground clearance 215mm, fuel tank capacity 87 liters, and curb weight 2285kg. The Prado is equipped with a 3.5L naturally aspirated engine with a maximum power output of 206kW, maximum torque of 365Nm, and maximum torque speed of 4500 rpm. It is paired with a 6-speed automatic transmission.
Was this review help?
7
5
Share
More Forum Discussions

How to lower the seatbelt buckle in the Sylphy?

The method to lower the seatbelt buckle in the Sylphy: Press both sides of the seatbelt switch to adjust it up and down. The car seatbelt is a safety device designed to restrain passengers during a collision and prevent secondary collisions with the steering wheel, dashboard, etc., or to avoid injuries caused by being thrown out of the car during a collision. The Sylphy is a car launched by Dongfeng Nissan, with body dimensions of 4641mm in length, 1815mm in width, and 1447mm in height, and a wheelbase of 2712mm. The Sylphy adopts the brand's new VMotion 2.0 design language and benefits from Nissan's global CMF platform, which features a longer and wider chassis structure, achieving a 1.254 luxury car width-to-height ratio and an ultra-low drag coefficient of 0.26Cd.
14
1
Share

What is the ground clearance of mainstream joint-venture SUVs?

The ground clearance of general SUV models ranges between 200mm and 250mm. Introduction to ground clearance: Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding wheels) and the supporting plane when the vehicle is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The smaller the ground clearance, the worse the ability to overcome obstacles. Passenger cars usually travel on flat urban roads, so they have smaller ground clearance. Off-road vehicles have larger minimum ground clearance to overcome larger obstacles. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher center of gravity reduces stability. Methods for measuring ground clearance: An automated detection system composed of position sensors, computers, cameras, and lights is used to measure the minimum ground clearance.
14
2
Share

How to Repair Car Dents?

If your car has a small dent, the traditional repair method is panel beating, which can be used for both large and small dents. Panel beating is generally not something car owners can do themselves and requires a visit to an auto repair shop. The principle of a car dent repair tool is to use tools like a hot glue gun and a bridge-type suction puller to attach a suction cup to the car body and then pull the dented area out using the principle of tension. If the dent is in the bumper area, you can pour hot water over it to make it elastically deform back through thermal expansion and contraction. Most bumper materials are relatively soft, and the plastic elasticity is good, making the operation relatively simple. You just need to prepare a pot of boiling water in advance, pour it over the impacted area, wait for it to heat up slowly, and then press the dented area back into place with your hand.
20
2
Share

Does the 10th-generation Civic have tire pressure monitoring?

10th-generation Civic has tire pressure monitoring. Unlike directly measuring the tire pressure of each tire, the tire pressure monitoring system monitors the vehicle and compares the rolling radius and rotational characteristics of each wheel and tire to determine whether one or more tires are significantly underinflated while driving. The 10th-generation Civic is a car launched by Dongfeng Honda, with body dimensions of 4649mm in length, 1800mm in width, and 1416mm in height, and a wheelbase of 2700mm. The Civic has a stylish and elegant appearance, with smooth body lines, and the hatchback design has undergone significant changes compared to the previous model. The interior of the Civic is finely crafted, with a fashionable design that highlights a sense of hierarchy, and it is equipped with rich functional configurations and comfortable seats.
20
3
Share

How to Park an Automatic Transmission Car on a Slope?

Methods for parking an automatic transmission car on a slope: 1. When parking on a slope, first press the brake pedal to bring the car to a complete stop, then shift into N (Neutral) gear; 2. Engage the parking brake firmly, release the brake pedal, and after ensuring the vehicle is stationary, shift into P (Park) gear; 3. When starting on an uphill slope, always ensure the handbrake is engaged and press the brake pedal firmly with your right foot before starting the car. Only proceed with starting the car once everything is ready. Automatic transmission cars are equipped with an automatic gearbox, which generally includes the following gears: P (Park), R (Reverse), N (Neutral), and D (Drive). Remember that unlike manual transmission cars, automatic transmission cars do not allow the use of a clutch slip technique (half-clutch). Special attention should be paid to controlling the accelerator pedal when reversing.
8
4
Share

How to Tell if a Car Pulls to One Side?

To determine if a car pulls to one side, the method is: while driving, if the steering wheel is kept steady, the car should generally move straight under normal circumstances. If it deviates to the left or right, this is what's known as pulling to one side. To check for this, first ensure that all four tires have equal and balanced air pressure. Then, drive on a straight, flat road with your hands lightly holding the steering wheel in a relaxed grip, and conduct the test under conditions without crosswinds. If the car's trajectory shifts to the left after driving a certain distance, it is considered to be pulling to the left; if it shifts to the right, it is pulling to the right. If the car starts pulling to one side after suspension modifications, this is due to changes in the suspension components' parameters, and a four-wheel alignment is required to readjust these parameters.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.