What is the normal static pressure for a car's air conditioning system?

What Causes the Mercedes-Benz C260L to Shake During Cold Starts?

Mercedes-Benz C260L shaking during cold starts can be attributed to the following reasons: Excessive Carbon Buildup on Spark Plugs: One issue during cold starts is low temperatures, especially in cold northern regions. If the spark plug gap is too wide and the ignition energy is insufficient, ignition failure may occur, causing individual cylinders to misfire, leading to weak starts and shaking. Overly Lean Air-Fuel Mixture: Shaking during cold starts could also result from an overly lean or rich air-fuel mixture. This mixture issue might stem from a fault in the closed-loop control system. Since the exhaust pipe temperature hasn't reached the required level during cold starts, the oxygen sensor may not be at its working temperature or could be damaged, resulting in shaking during cold starts. Solutions for Mercedes-Benz C260L Shaking During Cold Starts: Replace Spark Plugs: Inspect the spark plugs for carbon buildup and clean them. Check if the electrode gap meets specifications and replace the spark plugs if necessary. Check the Oxygen Sensor: Inspect the oxygen sensor for damage. Typically, if there is black carbon buildup on the oxygen sensor probe, it may indicate a faulty oxygen sensor.

13

5

Share

Which has more space, the Geely Vision X3 or the Chery Tiggo 3x?

The body dimensions of the Chery Tiggo 3x are 4200×1760×1570mm, while the Vision X3 measures 4005×1760×1575mm, indicating that the Tiggo 3x offers more space. Vision X3 features: In terms of features, it comes with window anti-pinch protection, one-touch up/down for all windows, OTA upgrades, an onboard dashcam, in-car WiFi connectivity, and height-adjustable driver's seat, all of which are not available in the Chery Tiggo 3x. This shows that the Vision X3 has richer configurations. Powertrain comparison: Both the Chery Tiggo 3x and the Geely Vision X3 are equipped with a 1.5L inline four-cylinder naturally aspirated engine. The Tiggo 3x's engine delivers a maximum power of 85kW and a peak torque of 143Nm, while the Vision X3's engine produces 80kW and 142Nm, indicating that the Tiggo 3x has stronger performance.

6

2

Share

What is the fuel consumption per 100 kilometers for the Yuexiang V3?

The Yuexiang V3 has six models: the 2015 1.4L manual Xingfu Type (China IV), Wenxin Type (China IV), Meiman Type (China IV), Xingfu Type (China V), Wenxin Type (China V), and Meiman Type (China V). All are equipped with a 101-horsepower engine, and the official fuel consumption per 100 kilometers is 5.3L. The fuel tank capacity of the Yuexiang V3 is 36L, and the distance it can travel on a full tank is 36/5.3*100=679km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline for combustion. Heavier cars also consume more fuel due to the greater driving torque needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline for combustion, which increases fuel consumption. Additionally, the engine control unit may increase idle speed to warm up the engine in cold temperatures, further increasing fuel consumption.

19

4

Share

How to Read a Car Tire Pressure Gauge?

Tire pressure gauges are generally divided into three types: analog (dial) tire pressure gauges, digital tire pressure gauges, and alarm-type tire pressure gauges. The latter two can display tire pressure through numerical values or alarms, and their principles are relatively simple. However, analog tire pressure gauges need to be connected to the tire valve stem to check the car's tire pressure, and then the tire pressure can be read by observing the pointer on the gauge head. There are three commonly used methods for tire pressure monitoring: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire's air pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and then the tire pressure data for each tire is displayed. When the tire pressure is too low or there is a leak, the system will automatically issue an alarm. Indirect Tire Pressure Monitoring: When the air pressure in a tire decreases, the weight of the vehicle will cause the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the purpose of monitoring tire pressure is achieved. Indirect tire alarm systems actually rely on calculating the rolling radius of the tires to monitor air pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of the two systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low air pressure. However, it still cannot provide real-time data on the actual pressure in all four tires as a direct system does.

7

1

Share

Which gear should the Tayron be in when waiting at a red light?

The Tayron should be in D gear with the brake pedal pressed when the red light duration is less than 30 seconds. If it exceeds 30 seconds, shift to N gear and engage the handbrake. Car gears include: P gear, R gear, N gear, D gear. Related introduction to car gears: P gear is the parking gear: When the gear lever is in the P gear position, the transmission is in neutral internally, but the output shaft is mechanically locked. At this time, the car will remain stationary even without pressing the brake, and it is generally used for long-term parking. When engaging P gear, the car must be completely stationary. Do not engage P gear when the car is not fully stopped, and always engage the handbrake. When parking on a slope, engage the handbrake first before shifting to P gear. R gear is the reverse gear: When the gear lever is in the R gear position, the rotation direction of the transmission's output shaft is opposite to that of the engine, allowing the car to move backward. When engaging R gear, the car must be completely stationary. Do not engage R gear when the car is not fully stopped. N gear is the neutral gear: When the gear lever is in the N gear position, the gears inside the transmission are in a freewheeling state, and the clutch is not engaged, resulting in minimal load on the transmission. N gear is generally used for short-term parking, such as waiting at a red light, and the transmission should also be in N gear when the car is being towed. D gear is the driving gear: When the gear lever is in the D gear position, the gears inside the transmission automatically shift between the lowest and highest gears based on factors such as vehicle speed and throttle opening, according to the preset shifting pattern. In most cases, D gear can be used for driving.

16

3

Share

What engine does the SAIC Maxus G20 use?

The Maxus G20 is equipped with a 2.0T turbocharged engine from SAIC's Blue Core series, which is produced by SAIC Motor Corporation. The SAIC Maxus G20 has a maximum horsepower of 224ps, a maximum power output of 165kw, and a maximum torque of 350nm. For the daily maintenance of the SAIC Maxus G20's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate over time during use. After a certain mileage, its performance will degrade, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. When the amount is small, it remains suspended in the oil; when large, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale deposits not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

4

5

Share

What is the normal static pressure for a car's air conditioning system?

What Causes the Mercedes-Benz C260L to Shake During Cold Starts?

Which has more space, the Geely Vision X3 or the Chery Tiggo 3x?

What is the fuel consumption per 100 kilometers for the Yuexiang V3?

How to Read a Car Tire Pressure Gauge?

Which gear should the Tayron be in when waiting at a red light?

What engine does the SAIC Maxus G20 use?

What is the actual fuel consumption of the Kamiq?

Where is the handbrake of Yueda Kia automatic transmission?

What are the best tires to replace for Haval H9?

Is the Audi A6 safe?