What is the normal starting RPM for a Nissan Sylphy?

1 Answers
DelEden
09/01/25 2:20am
The Nissan Sylphy has an idle speed of around 1500 RPM during a cold start, which drops to approximately 700 RPM after one minute. Reasons for higher starting RPM: In cold conditions, the vehicle needs to bring the engine to its optimal operating temperature quickly. Therefore, during a cold start, the engine control unit automatically increases fuel injection, burning more fuel than during normal idle to rapidly raise the engine coolant temperature. This results in a higher idle speed when the engine is cold. Fuel consumption during idle: For a typical 1.5L displacement family car, normal idle fuel consumption is about 1-1.5 liters per hour. With air conditioning on, this can reach approximately 2.5 liters per hour. Based on an average fuel consumption of 7 liters per 100 kilometers, this is equivalent to the fuel used for driving 35 kilometers. Naturally, vehicles with larger displacements will have higher fuel consumption.
Was this review help?
19
5
Share
More Forum Discussions

Where is the collision sensor located in the Audi C5?

Collision sensors are generally installed in the vehicle's B-pillar or the lower part of the doors. Definition of the Collision Avoidance System: The Collision Avoidance System (CAS), also known as the Pre-Collision System, Forward Collision Warning System, or Collision Mitigation System, is an automotive safety system designed to prevent or reduce the severity of collisions. In its basic form, the forward collision warning system monitors the vehicle's speed, the speed of the vehicle ahead, and the distance between the vehicles to warn the driver when the vehicle is too close, which may help avoid a crash. Causes of Collision Avoidance System Malfunction: Failure of the collision avoidance sensor is caused by loosening or short-circuiting; there may indeed be hard-to-observe obstacles in front of the vehicle, requiring reduced speed and careful observation to avoid a collision.
7
1
Share

Can the Volkswagen Teramont use 92-octane gasoline?

Volkswagen Teramont cannot use 92-octane gasoline. Introduction to Teramont: Teramont is SAIC Volkswagen's all-new mid-to-large SUV—officially named Teramont. At the 2019 Shanghai Auto Show, SAIC Volkswagen launched its first coupe SUV, the Teramont X. Highlights of the Teramont: The all-new Teramont features paddle-style digital gear shifting, offering a convenient design complemented by brushed aluminum-pattern chrome trim, enhancing the driving experience. Additionally, the 12-inch intelligent multimedia interactive system (with smart navigation) and the head-up display system provide a comprehensive digital driving view.
3
0
Share

Where is the jack located on a Corolla?

The jack on a Corolla should be located below the door edge, near the wheel. There is a reinforced spot that can be felt by hand. Exterior of the Corolla: The exterior is moderately stylish, dignified, and well-suited for family use. Interior of the Corolla: The interior has a simple overall design, with a conventional center console layout. The seats are spacious and comfortable, the air conditioning is effective, and the craftsmanship is good. Space in the Corolla: The overall space is adequate, with ample room in the front seats but limited space in the rear. The storage compartments are practical and convenient. Handling of the Corolla: The driving experience is comfortable overall, with smooth handling. The suspension is tuned to be softer, effectively absorbing road bumps for better comfort.
9
0
Share

How to deal with the non-display of the MG ZS reversing image?

If the reversing image of the MG ZS does not display, it is recommended to go to a car repair shop and ask a professional to check it. Reversing image adjustment: Turn on the vehicle's ignition switch, engage the reverse gear, and then go to the place where the reversing image is installed at the rear of the vehicle. It is usually installed at the position of the license plate light on the rear cover, or sometimes installed under the rear bumper. You can see the reversing camera light up, indicating that it is working normally. Reversing image: The reversing image is also called a parking assist system, or a reversing visual system, or an on-board monitoring system. This system is widely used in various large, medium, and small vehicles for reversing or driving safety assistance.
17
0
Share

Does the Alto 4AT Transmission Need to Have Its Filter Replaced?

It is not necessary to replace it. If you don't remove the oil pan to change the transmission fluid, you cannot replace the filter. Transmission Fluid Replacement Interval: It is best to replace it once after 17,000 kilometers. Although manual transmission fluid does not cause discomfort when exceeding 17,000 kilometers, this is a critical point. Functions of Transmission Fluid: The transmission generates a significant amount of heat during operation, and the transmission fluid helps dissipate this heat. During daily driving, gears must be shifted according to driving conditions, and the transmission fluid needs lubrication to ensure smoother gear changes. It also helps keep the transmission system clean and extends the lifespan of the transmission components.
11
4
Share

What is the channel number for Volkswagen oxygen sensors?

Volkswagen oxygen sensor channel numbers: range between 31 and 34. Function of the front oxygen sensor: The front oxygen sensor detects the oxygen concentration in the engine exhaust and transmits this information as an electrical signal to the ECU. The ECU then uses this oxygen concentration data to perform feedback control on the air-fuel ratio. Function of the rear oxygen sensor: Primarily used to detect the oxygen concentration in the exhaust after it has been treated by the three-way catalytic converter. If the oxygen concentration data obtained from the front and rear oxygen sensors is the same, it indicates that the three-way catalytic converter has failed.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.