···
Log in / Register

What is the normal range for tire pressure monitoring?

3 Answers
HoldenMarie
09/01/25 5:21am
The normal range for tire pressure monitoring is between 2.2 and 2.5 bar. Tire pressure refers to the air pressure inside the tire, and unstable tire pressure can reduce the tire's lifespan. Hazards of unstable tire pressure: 1. Reduced tire friction and adhesion, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates uneven wear of the tread pattern in the center of the tire. The method to reset the tire pressure monitoring system is: 1. Ensure the vehicle's tire pressure is within the normal range; 2. Park the vehicle on a level surface and turn off the engine; 3. Power on the vehicle and hold down the tire pressure monitoring button; 4. After 5 seconds, a warning sound will be heard, and releasing the button indicates a successful reset.
Was this review help?
14
2
Share
Braxton
09/13/25 8:03am
I've been repairing cars for over a decade and have encountered tire pressure issues many times. Generally speaking, the normal tire pressure range is between 25 to 35 PSI, with specific values depending on your car model. For example, compact cars usually require around 28 PSI, while SUVs may need approximately 32 PSI. The reasons are: too low tire pressure causes excessive tire wear and increased fuel consumption, while too high pressure increases the risk of blowouts, especially during hot summer months. I recommend checking tire pressure regularly, ideally once a month, using a reliable tire pressure gauge. Don't forget to refer to the recommended values in your owner's manual or the label on the door frame—those are tailored for your specific vehicle model. Seasonal changes also affect tire pressure; you should inflate slightly more in winter and release some air in summer for comfort. Remember, when the Tire Pressure Monitoring System (TPMS) warning light comes on, take immediate action to avoid safety hazards.
Was this review help?
7
5
Share
Expand All
StNaomi
10/28/25 2:01am
As a seasoned driver, I place great emphasis on regular tire pressure maintenance. The normal range is usually between 28 to 32 PSI, which is suitable for most common family cars. Low tire pressure makes the car feel sluggish and increases fuel consumption, while high pressure causes excessive bumpiness over speed bumps. My habit is to check the tire pressure every time I refuel—it only takes a few minutes with a simple tire pressure gauge. If the tire pressure monitoring system shows a warning, don’t ignore it; it could be due to a leak or temperature changes. Have it calibrated at a professional shop to ensure the recommended value stays around 30 PSI. Additionally, incorrect tire pressure can affect braking distance, increasing the risk of accidents, so maintaining the correct range is key to saving money and staying safe.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

The Difference Between Using 92 and 95 Octane Gasoline in Cars

About the difference between using 92 and 95 octane gasoline in cars, the introduction is as follows: 1. Different gasoline grades correspond to different engine compression ratios: The higher the grade, the stronger the gasoline's anti-knock performance. The sole criterion for selecting gasoline grade is the engine's compression ratio. The higher the compression ratio, the smaller the volume of combustible mixture is compressed, resulting in greater power and lower fuel consumption. 2. 92 and 95 octane gasoline have different octane values: 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. 3. 92 and 95 octane gasoline differ in power and fuel consumption performance: 95 octane gasoline has advantages over 92 octane in terms of power and fuel consumption because its isooctane content is higher than that of 92 octane gasoline.
10
4
Share

How to Replace the Battery in a Mercedes-Benz GLS Key?

Here is the method for replacing the battery in a Mercedes-Benz GLS key: 1. First, remove the mechanical key from the smart key, which is the L-shaped key. 2. At the very top of the smart key, there is a deep groove and a shallow groove. 3. Insert the L-shaped key into the shallow groove of the smart key, and the back cover of the smart key will automatically pop out. Remove the old battery, install the new large coin battery, reattach the back cover, and reinsert the mechanical key to complete the replacement. Below is some related information about the Mercedes-Benz GLS: 1. The Mercedes-Benz GLS is a crossover SUV from Mercedes-Benz. 2. In terms of appearance, the GLS features AMG styling, making it look very sporty. Its overall size remains largely unchanged, maintaining its robust and imposing presence. Among the many SUVs from Mercedes-Benz, I personally believe the GLS (formerly the GL) has the most balanced proportions. If you're looking for sheer masculinity, the G-Class is undoubtedly the top choice in the family. But if you want a vehicle with well-balanced proportions and a luxurious demeanor, the GLS should be your first pick.
14
5
Share

What is the fuel tank capacity of the A4L?

Currently, there are 7 available models of the Audi A4L on sale. The quattro and quattro RS versions have a fuel tank capacity of 58L, while other versions have a capacity of 56L. This data is published by the automobile manufacturer, and owners who have purchased the Audi A4L can also check it on the vehicle's configuration sheet. The Audi A4L requires 95-octane fuel, with a fuel consumption of 6.1 to 7.3L per 100 kilometers. A full tank can cover a distance of 794 to 918km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the car manufacturer is from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space is reserved to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
11
1
Share

Why is the engine idle noise very loud?

If there is a buzzing sound inside the vehicle cabin during idle, it is highly likely to originate from the hydraulic power steering pump. If the noise can be heard while driving, it indicates that the power steering fluid is too dirty or there is an issue with the power steering pump. Below are the steps for replacing the engine oil: 1. Remove the old oil from the power steering fluid reservoir and clean it thoroughly, then reconnect only the oil supply hose after cleaning; 2. Extend the return hose of the power steering fluid reservoir and connect it to a container for collecting the old oil; 3. Place a funnel on the reservoir for easy refilling and prepare to add new power steering fluid; 4. Have someone inside the vehicle start the engine and immediately turn the steering wheel left and right; at the moment the engine starts, the person outside should begin adding new fluid to the reservoir. The disconnected return hose will continuously expel the old oil from the entire system and discharge new oil; 5. Reserve about half a liter of power steering fluid during refilling. When the return hose discharges new oil, stop adding fluid. Carefully observe the fluid level in the reservoir and instruct the person inside to turn off the engine when it drops to nearly empty; 6. At this point, since the power steering fluid in the reservoir is almost depleted, reconnect the return hose. After reconnecting, add sufficient power steering fluid to the reservoir. This completes the power steering fluid replacement process.
15
1
Share

How to Turn Off Chevy ECO Mode?

There is no precise, uniform answer to this question because Chevrolet is a brand with a wide range of vehicle models, each of which may have different operating methods. Additionally, some Chevrolet models feature a passive ECO mode that cannot be turned off. ECO stands for the initials of three English words: Ecology, Conservation, and Optimization. It is a vehicle fuel-saving mode designed to conserve energy when activated. The ECO button is typically located on the left side of the vehicle, marked with the letters "ECO." Some models may have this button in green, making it easily identifiable.
13
4
Share

What should be noted when driving a motor vehicle through school areas?

When driving a motor vehicle through school areas, pay attention to observing traffic signs and markings, slow down, and avoid honking. Honking is prohibited in school zones. When driving through school areas, it is essential to slow down promptly, observe traffic signs, markings, and the conditions on both sides of the road and surroundings, and always be vigilant for students crossing the road. The following are precautions for driving on highways: Safety Check: Before getting in the car, check for potential safety hazards. Before driving on the highway, inspect the vehicle for any safety issues. Seat Belts: Always wear seat belts on the highway, including the driver, front passenger, and rear seats. Avoid placing loose items in the car.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.