What is the normal range for coolant temperature?

What is the actual fuel consumption of the Tharu 1.4t?

The Tharu 1.4t has 11 models currently on sale, including the 2022 280TSI Front-Wheel Drive Fashion Edition, 2022 280TSI Front-Wheel Drive Comfort Edition, and 2022 280TSI Front-Wheel Drive Luxury Edition, among others. These 11 models are equipped with a 150-horsepower engine, with an NEDC fuel consumption of 5.9L per 100 kilometers. The fuel tank capacity varies among different Tharu 1.4t models. The distance that can be covered on a full tank of fuel is as follows: Models equipped with the 150-horsepower engine have a fuel tank capacity of 51L. The distance that can be covered on a full tank is 51/5.9*100=864KM. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle in advance when approaching traffic lights can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion and work. Heavier cars also tend to have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up the car, which also increases fuel consumption.

3

Share

How to Operate Steering Safely and Fuel-Efficiently When Changing Lanes and Turning?

During driving, steering operations should be smooth. Avoid repeatedly turning the steering wheel back and forth, maintain straight-line driving, and prevent fuel wastage caused by sharp turns, sudden directional changes, and frequent lane changes. Tips for lane changing: 1. When changing lanes, prevent abrupt steering into adjacent lanes to avoid collisions with suddenly appearing vehicles or side-slipping on slippery roads. Lane changes should not be too slow; driving with prolonged pressure on lane markings can disrupt other vehicles. Generally, after overtaking, maintain a safe distance before returning to the original lane. On roads divided into motor vehicle lanes and non-motor vehicle lanes, cars should drive on motor vehicle lanes, motorcycles should stay to the right within motor vehicle lanes, while non-motor vehicles and disabled person-specific vehicles should use non-motor vehicle lanes. 2. Vehicles must adhere to right-side traffic rules: On roads without a central dividing line or separate motor/non-motor vehicle lanes, cars should drive in the middle while non-motor vehicles keep to the right. Large and small vehicles must follow their respective paths; large vehicles may occupy lanes without hindering normal small vehicle operation. When small vehicles drive at low speeds or encounter following traffic, they should move to large vehicle lanes. If there is an overtaking lane, cars may use it for passing but must return to their original lane afterward.

17

4

Share

Does the Spirior Need a Break-in Period?

Yes, the Spirior requires a break-in period, as every new car has one. Here are the relevant details: 1. The break-in period for the Spirior refers to the initial phase after purchasing a new car or after a major overhaul, typically covering 2000-3000 kilometers. This mileage is essential to ensure that all components fully contact, friction, adapt, and settle. 2. During this period, the car's components can adjust and enhance their ability to adapt to the environment, while also wearing down any protrusions on the parts. 3. The quality of the break-in period significantly impacts the car's lifespan, safety, and fuel efficiency. 4. Successfully completing the break-in period plays a crucial role in determining the vehicle's future durability, frequency of issues, fuel consumption, power output, and other key indicators. Below are some precautions for the Spirior's break-in period: 1. Warm-up: During a cold start, it's best to wait until the water temperature reaches at least 40°C before driving. Start gently by slowly releasing the clutch and accelerator pedal, and choose smooth roads for driving. Avoid revving the engine when parking. 2. Speed control: For a car in the break-in period, it's essential to control driving speed and avoid excessive speeds. The speed should ideally be maintained between 50-80 km/h. After driving 1500 kilometers, you can gradually increase the RPM and speed to the vehicle's maximum allowed limits, but avoid pressing the accelerator too hard to ensure that the pistons, cylinders, and other critical components increase their load under moderate conditions. 3. Frequent gear changes: Avoid using a single gear for extended periods. Start in a low gear and gradually shift to higher gears, driving progressively. Avoid situations like high speed in low gear or low speed in high gear. 4. Clutch: When braking during the break-in period, first press the clutch pedal to disengage the gear before applying the brake pedal. This reduces impact damage to the new engine, braking system, and chassis.

12

0

Share

What is the engine model of the GAC Trumpchi Yingbao?

GAC Trumpchi Yingbao's engine model is 4A15J2. The engine layout is transverse. It is equipped with a 1.5L turbocharged engine. The Trumpchi Yingbao, also known as the Trumpchi EMPOW55, made its debut at the 2020 Guangzhou International Auto Show. It is a sports sedan positioned in the compact segment, featuring a remarkably low drag coefficient of 0.26Cd. Yingbao's powertrain: The Yingbao is the first model equipped with GAC's all-new third-generation 1.5TGDI engine from the "JuLang Power" series. This engine, centered around GCCS technology, integrates dual-flow turbocharging, top-mounted water-cooled intercooler, high-pressure injection, large inertia balance shaft, intelligent thermal management, and low-friction technologies. It delivers a maximum power of 130kW and a peak torque of 270Nm. According to official data, the Yingbao's NEDC fuel consumption is 5.7L/100km. Paired with the engine is a 7-speed wet dual-clutch transmission, which is based on a globally top-ten transmission platform and independently developed by GAC. Featuring an innovative intelligent control system and a low-inertia torque converter, this transmission achieves a transmission efficiency of up to 96% with a shift time of just 0.2 seconds. Yingbao's features: In terms of driving modes, the Yingbao offers four options—ECO, COMFORT, SPORT, and SPORT+—along with a customizable driving mode. For the suspension system, the Yingbao utilizes a front MacPherson strut and rear multi-link independent suspension setup, striking a balance between handling performance and ride comfort.

18

4

Share

What car is the golden cross?

Golden cross is a Chevrolet car. Here are the detailed introductions about Chevrolet cars: 1. Overview: Chevrolet is an automobile brand under General Motors (GM) in the United States, founded on November 3, 1911, by William Durant and Louis Chevrolet. Chevrolet is also known as Chevy and was acquired by General Motors in 1918. 2. Others: The Chevrolet logo represents a stylized bowtie, and Chevrolet is named after the Swiss race car driver and engineer Louis Chevrolet. It symbolizes the generosity, style, and elegance of Chevrolet cars. Chevrolet cars have a profound historical heritage.

6

3

Share

What is the working principle of hybrid vehicles?

Working principle of hybrid vehicles: When the vehicle starts moving, the battery is fully charged, and its energy output can meet the vehicle's requirements. The auxiliary power system does not need to work. When the battery level drops below 60%, the auxiliary power system starts the vehicle. When the energy demand is high, both the auxiliary power system and the battery pack provide energy to the drive system. A hybrid electric vehicle refers to a vehicle equipped with more than one power source, including an electric motor drive, and complies with road traffic and safety regulations. The power system of a hybrid electric vehicle mainly consists of a control system, a drive system, an auxiliary power system, and a battery pack.

8

1

Share

What is the normal range for coolant temperature?

What is the actual fuel consumption of the Tharu 1.4t?

How to Operate Steering Safely and Fuel-Efficiently When Changing Lanes and Turning?

Does the Spirior Need a Break-in Period?

What is the engine model of the GAC Trumpchi Yingbao?

What car is the golden cross?

What is the working principle of hybrid vehicles?

Does the Toyota Yaris L Have a Rearview Camera?

What is the 0-100 km/h acceleration time of the Magotan 330?

Where is the fuel filter of the Ford Edge located?

Can You Make a U-Turn to the Opposite Lane in a Highway Service Area?