What is the normal range for car tire pressure?

1 Answers
BethanyRose
07/29/25 1:04pm
The standard tire pressure for passenger cars is normally in the range of 2.3-2.5 bar, with a maximum not exceeding 3.0 bar and a minimum not below 2.1 bar. According to the international GBT2978-2008 standard requirements, the tire pressure for different tires is as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; The maximum pressure should not exceed 3.5 bar. Normal tire pressure in winter: In winter, the tire pressure should be based on the standard tire pressure of the car tire, with an appropriate increase of about 0.2 bar. Normal tire pressure in summer: Generally, the lower limit of the standard tire pressure for car tires is sufficient. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1 bar lower than the standard to avoid tire blowouts due to high temperatures.
Was this review help?
16
5
Share
More Forum Discussions

How to Turn Off the Automatic Headlights on the Vezel?

Method to disable the automatic headlights on the Vezel: There is an AUTO marking on the headlight switch, simply rotate it to OFF to turn off. When the combination light switch is turned to the AUTO position, the automatic headlight function activates. Automatic headlights are a feature installed by some manufacturers for driver convenience, incorporating a photosensitive control system in the headlights. When this system detects that external light intensity exceeds or falls below a certain threshold, the car's headlights will automatically turn on or off. The Vezel is GAC Honda's first compact SUV, equipped with a 1.5L direct-injection engine delivering a maximum power of 96 kW and peak torque of 155 Nm. Its body dimensions are 4328mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm.
10
5
Share

Can You Change the Oil Without Replacing the Filter?

You cannot change the oil without replacing the filter. The filter's role is to remove impurities from the engine oil. Over time, these impurities can cause blockages. Additionally, a certain amount of oil remains inside the filter. If you only change the oil without replacing the filter, the new oil will mix with the old oil, reducing the oil's lifespan. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication, reducing friction, aiding in cooling, sealing against leaks, preventing rust and corrosion, and acting as a shock absorber. It is often referred to as the 'blood' of a car. The oil filter, or oil purifier, filters out debris, sludge, and moisture from the oil, ensuring clean oil is delivered to all lubrication points.
5
2
Share

Can the car still be driven when it displays an oil change reminder?

When the car displays an oil change reminder, it can still be driven. The oil change prompt is a maintenance cycle reminder preset by the manufacturer, simply notifying the owner that the vehicle requires servicing. However, the distance driven after the oil change reminder should not be too long, as prolonged driving without changing the oil may cause damage to the vehicle. Generally, the maintenance cycle for most vehicles is every 5,000 kilometers or six months, though the recommended interval may vary depending on the brand and model. Engine oil, also known as engine lubricant, serves multiple functions such as lubrication, reducing friction, aiding in cooling, sealing against leaks, preventing rust and corrosion, and acting as a shock absorber. It is often referred to as the 'lifeblood' of a car.
14
1
Share

What is Audi's Driver Assistance System?

Audi's driver assistance system is centered around adaptive cruise control with stop & go functionality, which is an automatic distance-keeping system for following vehicles. Within a speed range of 0 to 250 km/h, this system controls the vehicle's speed and the distance to the vehicle ahead by automatically accelerating or braking. Additional Information: 1. Stop & Go Function: The core of Audi's driver assistance system is adaptive cruise control with stop & go functionality, an automatic distance-keeping system for following vehicles. Within a speed range of 0 to 250 km/h, this system controls the vehicle's speed and the distance to the vehicle ahead by automatically accelerating or braking. 2. How It Works: The system operates using two radar sensors installed at the front of the vehicle (which automatically heat up in cold conditions). These sensors emit radar waves at a frequency of 76.5 GHz, covering a field of view of approximately 40 degrees and a fan-shaped area up to 250 meters long. The sensor control unit processes the signals to monitor conditions ahead of the car. The driver can influence the ACC system's functionality, adjusting the following distance and the intervention intensity of the control system in stages—from sporty to comfortable. The system's maximum deceleration is limited to about 4 m/s², roughly one-third of the maximum possible deceleration. In stop-and-go traffic, the ACC system can automatically reduce speed until the vehicle comes to a complete stop. After brief stops, such as at traffic lights, the car automatically restarts and follows the vehicle ahead. For longer stops, the driver must press the accelerator or operate the control lever to resume following. Before restarting, the system checks image data provided by the camera on the interior rearview mirror.
11
1
Share

What does the wrench symbol on a car mean?

Car manufacturers set up the wrench symbol as a maintenance reminder to alert car owners that their vehicle needs servicing. Different car models from various companies have different maintenance intervals. The maintenance cycle is predetermined when the vehicle leaves the factory, so the small wrench symbol will appear after a certain mileage is reached. Typically, the car maintenance cycle ranges from 5,000 to 8,000 kilometers, with factory settings often exceeding 8,000 kilometers. Car maintenance mainly includes servicing the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
16
4
Share

Should the car be polished after repainting?

After repainting, the car should be polished, but it is not recommended to polish immediately. You can wait three to seven days after painting before performing the polishing process. The car can be washed 24 hours after repainting and can be used normally. Reasons for polishing after repainting: 1. The painting engineer accidentally let some impurities fall into the paint during the work process; 2. Dust in the paint booth entered the paint; 3. After painting, some areas have flaws that need to be sanded with sandpaper; 4. It can make the paint surface feel more even; 5. It ensures that there is no color difference between the new paint and the old paint, making it look as if no repainting was done; 6. It can make the paint surface smoother and more glossy.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.