What is the normal range for car tire pressure?

1 Answers
Cardoso
07/29/25 11:22am
The normal range for car tire pressure is between 230 and 250 kilopascals (kPa). Generally, the manufacturer's recommended values can be found in the vehicle's user manual, on the label next to the driver's door, in the drawer near the driver's seat, or on the fuel tank cap. Precautions for car tires: Do not use repaired old tires. Once a tire has been repaired, its load-bearing capacity significantly decreases, and there is a risk of the repaired area rupturing again, especially in summer when tire pressure tends to rise. Repaired tires become very fragile during long-distance driving. Use nitrogen to inflate tires. Nitrogen inflation can reduce the occurrence of blowouts. From a gas efficiency perspective, nitrogen is an inert gas with stable thermal expansion properties, making it less prone to explosions, thereby greatly lowering the risk of blowouts. It also helps inhibit the spontaneous combustion of gases released by rubber tires, preventing self-ignition. Reasons for insufficient car tire pressure: Leakage from the tire or valve stem, which requires inspection at a tire shop. Air leakage caused by punctures from nails or other hard objects while driving, leading to insufficient pressure. The most critical factor in tire maintenance is proper inflation. Neither the tire nor the inner tube can be completely airtight. To avoid the dangers of underinflation, the air lost from the tire must be replenished.
Was this review help?
13
0
Share
More Forum Discussions

How to Use the Push-Button Gear Shift on the Buick Regal?

P is the parking gear, N is the neutral gear, R is the reverse gear, and D is the drive gear. These 6 gears can switch the transmission to manual mode. D gear is the drive gear; shifting to this gear allows normal driving, while the 2 gear is only used when driving on steep slopes.
12
5
Share

How to adjust for a narrow front and wide rear when reversing into a parking space?

When reversing to the right, the wheels may be too close to the corner of the parking space, or after parking, the left side may be wider while the right side is narrower. The timing of steering and the speed of the car body are inconsistent—a slight deviation can lead to a significant error.
10
0
Share

How to calculate the scoring date for upgrading from C1 to B2 license?

Visit the vehicle management office to consult relevant personnel, or check your own driver's license to confirm the date of issuance. The scoring date is calculated based on the initial driver's license issuance date, with every 12 months being a scoring cycle.
2
3
Share

How to distinguish between TPU and TPH?

Prepare a lighter, TPU and TPH materials. TPH material is chemically classified as plastic. When burned, it will have a distinct smell of burning plastic, and the ashes will turn black. TPU is not classified as plastic but rather as resin chemically. When burned, it emits a fragrant aroma, and the ashes appear in a sol color. Follow the steps to observe and distinguish the differences.
9
4
Share

What does H4 engine mean?

H4 engine refers to a horizontally opposed 4-cylinder engine, which is a structurally unique type of engine. Here is more information about the H4 engine: 1. Using such an engine can lower the vehicle's center of gravity. A lower center of gravity helps reduce body roll, thereby improving the car's cornering speed. 2. There are two automakers that use horizontally opposed engines: Subaru and Porsche. 3. Horizontally opposed engines also have drawbacks. Due to gravity, they are prone to uneven wear.
20
2
Share

What Causes the Inability to Accelerate After Shifting Gears?

Inability to accelerate after shifting gears may be caused by issues with the transmission program, which means the gear is too high and does not match the actual driving conditions. Here are some precautions for shifting gears: 1. For manual transmission vehicles, the clutch plays a crucial role in smooth driving. Apart from starting the car, shifting gears, and braking at low speeds, avoid unnecessarily pressing the clutch pedal or resting your foot on it. 2. When shifting gears while driving, press and release the clutch pedal quickly to avoid partial engagement, which can accelerate clutch wear. Ensure proper coordination with the accelerator during operation.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.