What is the normal range for a tire pressure monitor?

How to ventilate in the car on rainy days?

Close the windows and turn on the air conditioning's external circulation. On rainy days, if the temperature is moderate and you just want ventilation, simply turn on the fan for ventilation without pressing the air conditioning button. If it's stuffy and hot, you can press the air conditioning button. Note that it is recommended not to sleep or rest in the car. Here are additional notes on precautions for resting in the car: 1. Open the window for ventilation: Leaving a small gap can also facilitate air circulation. Whether it's a hot summer or a cold winter, this gap might be a lifesaver. 2. Turn on the car's external circulation mode: Many car owners are accustomed to using the internal circulation mode for air conditioning, which is not wrong. However, during rest, it is recommended to switch to the external circulation mode. 3. Regularly check for exhaust pipe leaks and whether the windows are sealed: If carbon monoxide from the vehicle's exhaust leaks into the car, it can gradually accumulate and increase in concentration, leading to poisoning. If the exhaust pipe is damaged, exhaust gases can more easily enter the car, increasing the risk. The same consideration applies to keeping windows closed. 4. Try to park the vehicle in an open outdoor area: Confined spaces are more likely to cause carbon monoxide buildup, and some underground parking garages inherently have poor air circulation. When resting, the vehicle should be parked in an open outdoor area to ensure fresh air circulation.

17

5

Share

What Causes a Motorcycle to Suddenly Stall and Fail to Restart During a Ride?

A sudden engine stall typically points to two major issues: fuel system or electrical system problems. Here are the detailed explanations: 1. Fuel supply interruption: With confirmed fuel in the tank, check whether the carburetor contains fuel. If empty, this indicates a clog in the fuel line between tank and carburetor requiring cleaning and unblocking. If fuel is present but the engine won't start, inspect the carburetor fuel filter for blockages and check the main jet for contamination. Even if restart succeeds, don't assume resolution - this indicates undiscovered fuel system faults requiring complete fuel line purging, otherwise spontaneous stalling may recur. 2. Engine overheating: Excessive temperature causes lubrication failure, potentially leading to piston seizure in the cylinder. Diagnosis should begin with checking crankcase oil levels. If low or absent, inspect oil pan and drain plug for leaks before replenishing with specified lubricant. 3. Electrical faults: Sudden power loss usually stems from wiring issues. Examine all connectors and trigger coils, clean oil residues, tighten terminal grips, and enhance contact reliability. 4. Clutch or component seizure: When clutch support plate screws loosen progressively (due to improper tightening or failed lock washers), screw heads may contact transmission countershaft bearing covers, causing clutch lockup and abrupt stoppage.

18

2

Share

What are the methods for diagnosing car faults?

Methods for diagnosing car faults are as follows: 1. Observation and Inquiry Method: When a car develops a fault that requires diagnosis, the repair personnel should make a preliminary judgment about the car's model and age upon first sight. The model can be identified from the exterior; by observing the exterior or flipping the cab to expose the engine, the age can be determined. Experienced repair personnel can even immediately diagnose the car's fault. 2. Experience Method: As the name suggests, the Experience Method for diagnosing faults relies on the basic skills and extensive experience of the driver and repair personnel to quickly and accurately diagnose car faults. 3. Observation Method: The Observation Method involves the car mechanic carefully observing the fault phenomenon at the location indicated by the car user, then making a judgment about the fault. This is one of the most commonly used, basic, and effective fault diagnosis methods. 4. Auditory Method: Using hearing to diagnose car and engine faults is the most common and straightforward method. When the car is running, the engine operates under different conditions, producing a noisy yet regular sound. When a fault occurs in a certain part, abnormal noises will appear. Experienced individuals can immediately diagnose the car fault based on the abnormal noises. 5. Testing Method: Using the Testing Method to diagnose car and engine faults is one of the common methods. The Testing Method can be used to check the functions of the car and engine without or with minimal disassembly, to achieve the purpose of diagnosing faults.

3

2

Share

What does it mean when the SVS light is on in a Besturn B50?

SVS is the engine malfunction indicator light, which is equivalent to the "engine-shaped" warning light. This light will illuminate when the ignition key is turned on and should turn off after the vehicle is started. When the engine ECU detects a fault, the SVS light will illuminate. If this light comes on while driving, it indicates a fault in the vehicle's engine. It is recommended to visit a service station for diagnostics to check if there is a fault in the SVS control system. Below is an introduction to Mercedes-Benz cars: 1. Brand Introduction: Mercedes-Benz is a world-class luxury car brand, considered one of the most premium automotive brands globally. It is renowned for its perfect technical standards, rigorous quality benchmarks, innovative capabilities, and a series of classic coupe models. 2. Founding History: Mercedes-Benz is a world-famous German automotive brand, established in 1900 and headquartered in Stuttgart. It was founded by Karl Benz and Gottlieb Daimler. Mercedes-Benz is renowned worldwide for its high-quality, high-performance automotive products. In addition to premium luxury cars, Mercedes-Benz is also one of the most famous manufacturers of buses and heavy-duty trucks in the world.

11

0

Share

Will a restricted license plate vehicle be penalized for running on the highway?

No penalty will be incurred. Restricted license plate vehicles are only limited to urban areas and not prohibited from running on highways. Vehicles on highways, regardless of using any license plates or temporary ones, will not be affected and there is no need to worry about this. Below are additional precautions for driving on highways: 1. Pre-drive vehicle inspection: Before driving, the driver should conduct a comprehensive check of the vehicle, with a focus on various fluids, tires, braking system, etc. Top up fluids to the appropriate level if they are low; inspect tires carefully and remove any debris from the treads. 2. Adjust mirrors: When the rearview mirrors are in the optimal position, they allow the driver to better observe the sides and rear of the vehicle. Note that the adjustment methods for the left and right side mirrors are slightly different. 3. Adjust the seat: A proper seating position can help the driver alleviate fatigue during long-distance high-speed driving and ensure that the seating posture does not hinder the handling of emergencies. 4. Check onboard tools: Onboard tools may rarely be used in daily driving, but they can play a significant role in emergencies. 5. Always fasten seat belts: The importance of seat belts is unquestionable, yet many drivers or passengers still neglect them. 6. Pay attention to highway entrances: There are very strict requirements when entering highway ramps, including prohibitions on overtaking, making U-turns, stopping, and reversing.

14

5

Share

What Does It Mean When the Battery Warning Light Comes On in a Car?

The illumination of the battery warning light indicates that the generator voltage is lower than the battery voltage, resulting in a power supply circuit fault. At this time, the vehicle is running on battery power, and the generator should be inspected and repaired at a repair shop as soon as possible. Below are specific details about car batteries: 1. Classification of batteries: Car batteries are divided into maintenance-free batteries and conventional batteries (lead-acid batteries). Most current vehicle models use maintenance-free batteries, while many Japanese cars use conventional batteries. Conventional batteries have electrodes made of lead and lead oxide, with an electrolyte of sulfuric acid solution. Their lifespan is generally around 2 years, so replacing them every two years is most reasonable. 2. Regular maintenance: To extend the battery's lifespan, regular maintenance and good driving habits are necessary. When the electrolyte is insufficient, the battery may not hold a charge, requiring timely refilling. After turning off the car, ensure all lights are off to avoid excessive battery drain. If the car is parked for an extended period, it is recommended to disconnect the battery's negative terminal to prevent discharge. It is also advisable to start the car once a week, allowing the battery to charge at idle speed via the internal generator, ensuring sufficient power for the next start.

12

2

Share

What is the normal range for a tire pressure monitor?

How to ventilate in the car on rainy days?

What Causes a Motorcycle to Suddenly Stall and Fail to Restart During a Ride?

What are the methods for diagnosing car faults?

What does it mean when the SVS light is on in a Besturn B50?

Will a restricted license plate vehicle be penalized for running on the highway?

What Does It Mean When the Battery Warning Light Comes On in a Car?

Can a Hairdryer Be Used Instead of a Heat Gun for Film Application?

How to Deal with a Leaking Car Water Pump?

Is It Necessary to Rotate Front and Rear Tires for Small Cars?

What Causes the Car to Always Overheat?