What is the normal pressure difference between the four tires of a car?

1 Answers
LaVictoria
07/29/25 3:47pm
The pressure difference between the four tires is considered normal if it is around 0.1 bar. There are three commonly used methods for tire pressure monitoring: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the weight of the vehicle causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): TPMS combines the advantages of both systems mentioned above. It is equipped with direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to using only direct systems, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time pressure data for all four tires as effectively as a direct system.
Was this review help?
8
2
Share
More Forum Discussions

How to Use Haval Cruise Control?

The usage method of Haval cruise control is as follows: 1. Activate cruise and set speed: First press CRUISE to enable the cruise function, the white cruise light on the dashboard will illuminate. When the vehicle speed reaches the desired cruise speed, press the SET minus key, and the cruise light on the dashboard will turn green, indicating the speed is set. Release the accelerator to maintain the set speed. 2. Decrease cruise speed: While in cruise mode, press SET again to reduce the speed by 1.6km/h each time. Hold SET to continuously decrease the speed. 3. Increase cruise speed: While in cruise mode, press RES to increase the speed by 1.6km/h each time. Hold RES to continuously increase the speed. 4. Accelerate for overtaking: After overtaking, releasing the accelerator will gradually slow down to the set cruise speed and continue cruising. 5. Pause/Resume cruise: Press the brake or CANCEL to temporarily stop cruise control. The cruise light will change from green to white. Press RES at a speed not lower than 40km/h to resume cruising at the previous speed. When the speed drops below 40km/h, the stored speed is lost and cannot be resumed. 6. Turn off cruise: Press CRUISE to deactivate cruise control, and the cruise light will turn off.
7
5
Share

Which country does the Lexus car belong to?

Lexus is a brand under Japan's Toyota, and Lexus is the same as the Chinese name 'Lingzhi'. Lexus is Toyota's high-end luxury brand, originally targeting the North American market, but later entered the domestic market as well. Lexus offers a variety of SUVs and sedans. There are many models under Lexus that are popular among car enthusiasts, such as the IS, LX, and IS. The LX is a large-displacement SUV, equipped with a 5.7-liter V8 naturally aspirated engine, featuring dual VVT-i technology and multi-point fuel injection, with an aluminum alloy cylinder head and block.
6
3
Share

What level of car is the Elantra?

The Elantra is classified as an A-segment car. It comes standard with features such as rear parking radar, tire pressure monitoring, projector headlights, LED daytime running lights, frameless wipers, power windows for all four doors, and power-adjustable exterior rearview mirrors. Safety configurations like ESC (Electronic Stability Control), hill-start assist, emergency braking reminder, and front side airbags are also standard across all variants. The Elantra is equipped with two engine options: a 1.4T and a 1.6L. The 1.4T variant is paired with a 7-speed dual-clutch transmission, while the 1.6L variant comes with either a 6-speed manual or a 6-speed automatic transmission. In terms of body dimensions, the Elantra measures 4610mm in length, 1800mm in width, and 1450mm in height.
11
5
Share

How to Turn on the External Air Circulation in the Elantra?

The method to turn on the external air circulation in the Elantra is: Press the button on the center console that features an unenclosed car icon with an external air arrow pointing into the car. The external air circulation works by using a fan to draw outside air into the car and expel the inside air through another fan, achieving ventilation without opening the windows. Internal circulation, on the other hand, recirculates the air inside the car, which is useful for promoting air flow when using the heater in winter or the air conditioner in summer. In the Elantra, the air conditioning in summer operates via the compressor, requiring the AC button to be activated. When the air conditioning is on, if the interior temperature is higher than the exterior, the windshield may fog up. In such cases, turning on the external air circulation can effectively remove the fog.
10
4
Share

What brand is the Lingpai transmission?

The transmission brand for the Lingpai is Honda, which is equipped with a CVT continuously variable transmission and a 6-speed manual transmission. The Lingpai is a compact car with exterior dimensions of 4756mm in length, 1804mm in width, and 1509mm in height, a wheelbase of 2730mm, a fuel tank capacity of 40 liters, and a curb weight of 1261kg. The Lingpai is powered by a 1.0L turbocharged engine, delivering a maximum horsepower of 122hp, a maximum power output of 90kW at 5500rpm, and a peak torque of 173Nm available between 2000 to 4500rpm.
6
0
Share

How to Set the Cruise Control on the Lamando?

Lamando cruise control setting method: Press the power button to activate the cruise control system, then press the SET button at the desired speed to set the cruising speed. The cruise control system, abbreviated as CCS, is also known as a speed control device or autonomous driving system. Its function is to automatically maintain the vehicle speed as required by the driver without pressing the accelerator pedal, allowing the car to travel at a fixed speed. The Lamando is a compact car launched by SAIC Volkswagen, with dimensions of 4599mm in length, 1826mm in width, and 1425mm in height, and a wheelbase of 2656mm. In terms of appearance, this car features a diving and horizontally expanded front face, with two chrome decorations placed on the upper grille, integrated with the chrome eyebrow line of the headlights. The front bumper, paired with the lower grille, extends horizontally towards both sides.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.