What is the normal oil temperature for Volkswagen CC?

1 Answers
LaOwen
07/24/25 8:06pm
An oil temperature of 100 degrees is normal, as the working temperature of engine oil typically ranges between 70 and 90 degrees. Below is relevant information about automotive engine oil: Functions of engine oil: Alleviates friction and high temperatures, reduces gas leakage, prevents contamination from external sources, protects against contact between water, air, acidic harmful gases and engine components, cushions pressure surges in engine cylinders, and cleans contaminants generated on component surfaces. Introduction to engine oil: Engine oil, also known as engine lubricant, serves multiple purposes including lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. It is often referred to as the 'blood' of a vehicle. Engine oil consists of two main components: base oil and additives. The base oil forms the primary constituent of the lubricant, determining its fundamental properties, while additives compensate for and enhance the performance shortcomings of the base oil, imparting new characteristics and serving as a vital component of the lubricant.
Was this review help?
17
5
Share
More Forum Discussions

How to Check an Automotive Repair Certificate?

Directly search for "Baidu Vocational Skills Appraisal Guidance Center" and "National Vocational Qualification Work Network" on the website, then click on the certified website. Open the main page of the repair certificate and check the stamp in the lower right corner to see which region issued it, then input the region on the official website. Go to the appraisal center website of the issuing region, enter your personal information to check, detailed personal information is required.
11
4
Share

How to Deal with Water Ingress in Car Radar?

First, use a dry cloth to clean the lens surface of the camera, then use a hair dryer to blow air at the camera for a few minutes. If the water ingress is caused by poor sealing of the camera, it is best to remove the camera and dry it thoroughly. If moisture has penetrated into the internal components of the camera and the hair dryer is ineffective, then it is necessary to go to a repair shop for a replacement.
5
3
Share

How to Deal with Scratches on Black Plastic Car Bumper?

Lightly sand the scratched area with wet sandpaper to thoroughly remove dirt, ensuring complete cleanliness. After cleaning the dirt, apply the touch-up pen paint on paper to match the color with the car body. Wipe the area to be touched up clean with a cleaning pad. Unscrew the upper part of the touch-up pen cap and apply the paint evenly with the brush, applying thin layers—about 2-3 layers should suffice.
13
2
Share

How to Fix Detached Car Interior Fabric?

Purchase a specialized automotive adhesive or bonding product, apply the glue along the detached edge, let it dry for 3-5 minutes, and then press it back into place. Alternatively, you can use clips for repair by selecting clips that match the color of the interior. The downside is that it may not look as aesthetically pleasing, but it is a practical solution. Another method is to prepare a new piece of headliner fabric along with specialized headliner adhesive. Apply the adhesive to both surfaces, let it dry for 3-5 minutes, then press them together and reinstall the headliner.
11
1
Share

What to Do When Your Car Battery Dies: How to Use an Emergency Power Source?

First, open the car's hood and ensure the support rod securely holds it in place. Locate the battery, then correctly attach the clamps to the positive and negative terminals. Make sure they are firmly connected and not reversed. Activate the starting port of the 'Dian Jiang Jun' car emergency jump starter, then insert the blue connector of the battery clamps into the ignition interface. Double-check that the battery clamps are secure and the polarity is correct. Enter the driver's seat and turn the key to start the engine (some vehicles may have a push-button start).
11
1
Share

How to open the hood of Chery EQ1?

Locate the hood release switch in the lower left corner, usually in one of these two positions shown in the diagram. You'll hear a sound when opening it. Gently lift the hood by hand. Find the hood support rod in the engine compartment and pull it out. Position the rod - typically when the rod is upright, there should be a corresponding socket for it on the hood. When closing the hood, lower it from about 10cm above the latch and let it drop gently to secure it.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.