What is the normal oil consumption rate for BMW per kilometer?

1 Answers
DeVivienne
07/29/25 12:50pm
BMW consumes one liter of oil per thousand kilometers normally. The official standard given by BMW is that oil consumption within 0.7L per 1000 kilometers is normal, while the standard for the M series is 1.5L. More details about BMW oil consumption are as follows: Reasons for BMW oil consumption: Due to the inconsistency between domestic fuel quality and international standards, a large amount of carbon deposits can easily form in the combustion chamber during engine operation. Carbon deposits are an important cause of various engine problems, including oil consumption; carbon deposits accumulate in the piston grooves. Solutions for BMW oil consumption: Check if it is really oil consumption: In many cases, excessive oil consumption is mistakenly considered as oil burning due to oil leakage. You can place a white cloth under the engine, start the engine, and check for oil stains on the cloth to detect oil leakage; check if carbon deposits in the cylinder cause the piston rings to stick; replace the valve stem seals. The probability of BMW oil consumption caused by damaged valve stem seals is relatively high, and they can be replaced without dismantling the cylinder. Solving oil consumption by replacing valve stem seals can be considered a cost-effective method; check if the cylinder walls and pistons are severely worn with excessive clearance.
Was this review help?
11
1
Share
More Forum Discussions

What is the wheel size of the BYD F3?

The wheel size of the BYD F3 is 15 inches. The tire size of the BYD F3 is 195/60R15, and the tire brand is Linglong. The wheel hub is the rotating part of the tire's inner rim connected by pillars to the wheel core, which is the metal component mounted on the axle that supports the tire. It is also known as the rim, steel ring, or wheel disc. Wheel hubs come in various types based on diameter, width, forming method, and material. The BYD F3 is an A+ class passenger car produced by BYD Auto, known for its high cost-performance ratio, spacious interior, stylish and elegant exterior, simple and generous interior design, and rich configurations in high-end models.
8
1
Share

What is the 0-100 km/h acceleration time of the BYD e3?

The 0-100 km/h acceleration time of the BYD e3 is approximately 10 seconds. There are many factors that affect a car's 0-100 km/h acceleration time, including not only the type of engine but also the gearbox's shifting efficiency, the vehicle's weight, and the driver's skill. The BYD e3 is a pure electric vehicle equipped with two versions of motors: 70 kW and 100 kW, generally used for urban commuting. The BYD e3 is a pure electric compact sedan produced by BYD Auto, with a body length of 4450 mm, width of 1760 mm, height of 1520 mm, and a wheelbase of 2610 mm.
10
3
Share

Does the Corolla feel unstable at high speeds?

When driving at 120 km/h on the highway, the Corolla remains relatively stable, but may feel slightly unstable when exceeding this speed. Below is more information about the Corolla: 1. Introduction: The Corolla is equipped with Michelin 215/45-R17 tires, TRD-Sportivo high-performance shock absorbers, TRD-TF4 17-inch sport rims, reinforced clutch, and high-performance brake pads, ensuring decent sporty performance. 2. Key advantages: Low fuel consumption; comfortable ride with smooth driving experience; rich and user-friendly interior configurations.
7
0
Share

Where is the fuse box of BYD F3 located?

The BYD F3 has two fuse boxes. One is located near the battery in the engine compartment, and the other is inside the glove box on the left side of the steering wheel. The car fuse box is used to install car fuses, which control different circuit systems. There are various types of car fuse boxes, mainly including plastic fuse boxes, bakelite fuse boxes, lead-in type fuse boxes, circuit board fuse boxes, and instrument panel-mounted fuse boxes. The BYD F3 is a compact sedan produced by BYD Auto, with body dimensions of 4533mm in length, 1705mm in width, and 1490mm in height, and a wheelbase of 2600mm. The entire series is equipped with a 1.5L naturally aspirated engine, and the transmission options include a 5-speed manual and a 6-speed dual-clutch.
16
1
Share

Is the Honda Envix equipped with a three-cylinder engine?

Honda Envix is equipped with a three-cylinder engine. A three-cylinder engine consists of three cylinders. Inside the engine, three identical single cylinders are arranged on one block sharing a crankshaft to output power. Its main function is to convert chemical energy into mechanical energy, providing power for traditional fuel vehicles as well as new energy hybrid models. Honda Envix is a compact sedan launched by Dongfeng Honda. In terms of power, all its models are equipped with a 1.0T turbocharged engine, with a maximum power of 90 kilowatts and a maximum torque of 173 Newton-meters. In terms of the transmission system, the engine is matched with a 6-speed automatic manual transmission and a CVT continuously variable transmission.
9
0
Share

What engine does the BYD F0 use?

BYD F0 is equipped with a 1.0-liter three-cylinder naturally aspirated engine. This engine delivers a maximum power of 68 horsepower and a peak torque of 90 Nm, with the maximum power achieved at 6,000 rpm and the maximum torque available between 4,000 to 4,500 rpm. It features multi-point fuel injection technology and utilizes an aluminum alloy cylinder head and block. The BYD F0 is a stylish compact car launched by BYD, powered by the company's self-developed BYD371QA high-performance eco-friendly engine with a displacement of 1.0L, meeting the National IV emission standards, and boasting a fuel consumption of just 4.2L per 100 kilometers. In terms of safety features, the BYD F0 comes with dual airbags, ABS, and power steering.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.