···
Log in / Register

What is the normal mileage range for a new car upon delivery?

6Answers
LilyFitz
07/29/2025, 03:34:15 AM

For a new car upon delivery, a mileage range of 0 to 100 kilometers is considered normal. The key points to note when taking delivery are: 1. Verify that all vehicle documents are complete; 2. Carefully check the quantity of onboard tools; 3. Inspect the vehicle exterior for any scratches, wear, signs of collisions, or bodywork and paint touch-ups; 4. Lift the vehicle to examine the undercarriage for any grounding damage or deformation; 5. Check if the production dates of vehicle components are consistent with or close to the vehicle's manufacturing date; 6. Ensure all vehicle functions are operating normally; 7. Conduct a dynamic test to check if the engine idles smoothly, if the steering wheel has noticeable vibrations, if the front and rear seats have significant shaking, and if there are any noticeable noises inside the cabin.

Was this review help?
107
Share
LydiaAnn
08/12/2025, 09:24:29 PM

Last year I bought a new car, and on the day of delivery, I checked the odometer—it only showed 18 kilometers, which was quite reassuring. I chatted with the salesperson, who explained that it's normal for new cars to be driven a few laps during factory testing, with an ideal range generally between 10 to 50 kilometers, as long as it doesn’t exceed 100 kilometers. A friend of mine bought a car with 40 kilometers on it, and it has been running smoothly for years. However, if the mileage is over 80 kilometers, it’s worth asking more questions—it might be a display car or have issues, which could affect its resale value later. When picking up the car, I always make a habit of carefully inspecting the tires, engine, and interior to ensure everything is brand new before signing off. It’s also good to communicate frequently with the dealer to avoid being misled, ensuring a worry-free and value-retaining experience when driving your new car home.

Was this review help?
8
Share
Expand All
DeMadeline
10/04/2025, 03:50:07 AM

As a car enthusiast, I believe the mileage of a new car depends on brand habits. German cars often have around 30 km at delivery, Japanese cars may keep it under 20 km, and American cars occasionally reaching 50 km is acceptable. The normal range is 0 to 100 km, but anything over 150 km should raise red flags as it might affect the car's condition or resale value. I once picked up a car with just 15 km on it and was extremely satisfied because low mileage proves the car is fresh and unworn. Don't forget to check the factory report and transport records when taking delivery, and asking the salesperson a few more questions can help avoid any tricks. In short, keeping it under 50 km is the safest bet, making the car feel more reliable and durable to drive.

Was this review help?
4
Share
Expand All
KaiLynn
11/17/2025, 09:37:39 PM

After years of experience with cars, I believe the normal mileage for a new car at delivery should be under 100 km. Factory testing is the primary reason, such as short-distance driving to verify performance. If the mileage exceeds 200 km, it's necessary to check whether it's a display car or a transportation issue. Consumers should verify the report, inspect the paint and tire condition upon delivery. Ensuring everything is normal allows for worry-free driving without affecting future resale value.

Was this review help?
8
Share
Expand All
McElliana
01/07/2026, 11:14:11 PM

I remember when I bought my first new car, nervously checking the mileage—it was 25 km. The salesperson laughed and said test drives don’t count. The normal range is 10 to 50 km; anything higher and you should ask questions to avoid getting shortchanged. That time, my buddy and I inspected the car inside and out, making sure everything was flawless before paying. With low mileage to this day, I can recoup more when selling it secondhand. My advice: don’t slack off during pickup—inspect thoroughly, and your car will last longer.

Was this review help?
4
Share
Expand All
Ramos
04/04/2026, 04:49:14 AM

When buying a car, I pay attention to the mileage because it directly affects the future resale value. A normal new car should have no more than 50 kilometers, preferably under 30 kilometers. If the mileage is higher, say over 80 kilometers, it might be considered a used car, depreciating faster and causing potential issues. Always check the report and the car's condition upon delivery to ensure the mileage meets the standard. From my personal experience, a car with 25 kilometers retains its value well even after several years. This small detail can save you a lot of hassle.

Was this review help?
9
Share
Expand All
More Q&A

Can National V Vehicles Still Be Licensed After the Implementation of National VI?

After the implementation of the National VI standard, National V vehicles cannot be licensed. Here are some details about the National VI emission standard: How to check if a car meets National VI: Check the vehicle conformity certificate: The vehicle comes with a conformity certificate upon leaving the factory, which clearly states the vehicle's emission standard. You can also refer to the accompanying vehicle list: Find the vehicle's emission standard in the vehicle information section. Introduction to the National VI emission standard: The standard requires a 50% reduction in carbon monoxide emissions for gasoline vehicles, a 50% reduction in total hydrocarbon and non-methane hydrocarbon emission limits, and a 42% stricter nitrogen oxide emission limit. According to the plan, the National VI standard will be implemented in two phases: 6A and 6B.
107
Share

What Causes the Engine Warning Light to Illuminate When Accelerating Hard?

The engine warning light may illuminate due to the following 7 main reasons: Sensor malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or their signals are interrupted, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel quality issues: Failure to use the fuel and engine oil as specified by the manufacturer may cause engine wear, leading to the warning light illuminating. Poor combustion of air-fuel mixture: Poor combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all lead to poor combustion. Turbocharging issues: The intake turbocharging pipeline or turbocharger can also cause the engine warning light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake issues: Problems with the vehicle's intake system can cause engine pipeline blockages, and in severe cases, trigger the engine warning light. A dirty air filter that is not regularly cleaned can lead to intake problems. Exhaust issues: Exhaust system faults can also cause the engine warning light to illuminate. Common causes include rear oxygen sensor failure, catalytic converter issues, exhaust camshaft and bearing failures, with the catalytic converter being the most frequent culprit. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can all contribute to catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller is incompatible with the engine ECU, the anti-theft system may prevent the engine from operating normally, while also illuminating the engine warning light. If the engine warning light illuminates, follow these steps: First, check if the engine is running normally, looking for symptoms like shaking or black smoke. If present, avoid restarting the engine. Note: Never restart the engine if the red warning light is on. If the engine can be started, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the "on" position (without depressing the clutch). The vehicle will enter self-diagnosis mode upon powering up. Wait 5-10 seconds to see if the warning light turns off. If the warning light remains on, visit a service center as soon as possible. Technicians can use a portable diagnostic tool to read fault codes, identify the issue, and perform targeted repairs.
120
Share

What is the principle of tire repair fluid?

The principle of tire repair fluid is to utilize the fibers and rubber particles or the suspended fine rubber in the glue. When the tire is deflated, the rubber particles or fine rubber particles precipitate and form clumps to block the air holes. The advantages and disadvantages of tire repair fluid are as follows: Advantages of tire repair fluid: Simple operation, can be done by yourself without stopping the car; uses a glue injection method to quickly repair tire punctures, with repairs taking as little as 3 seconds; strong repair capability, capable of repairing the smallest micro-holes up to 6mm holes; the glue itself is non-flammable and safe, non-toxic. Disadvantages of tire repair fluid: The glue is a chemical compound that can corrode the tire itself, to some extent reducing the tire's lifespan. It can only be used for short-term emergency repairs, as over time the repaired punctures may still leak air.
109
Share

What is the speed of the Fuxing Hao?

The standard speed of the Fuxing Hao is 350 kilometers per hour, with a maximum speed of up to 400 kilometers per hour. Here is more information about the Fuxing Hao: 1. The Fuxing Hao electric multiple unit (EMU) was developed under the leadership of the China Railway Corporation, with complete independent intellectual property rights. It represents a world-class level of electric multiple units and is the fastest high-speed train in operation globally. 2. The early two models were the Red Dragon CR400AF and the Golden Phoenix CR400BF. The Fuxing Hao CR400 series has a top speed of 400 kilometers per hour and a standard speed of 350 kilometers per hour.
112
Share

What Causes the Brake Light Malfunction?

Reasons for the brake system warning light to illuminate indicate a malfunction in the brake system. The specific causes are as follows: Low brake fluid level: This affects braking performance and driving safety. The vehicle should be taken to a repair shop for inspection as soon as possible. Handbrake not released: If the handbrake is not fully released or not released at all, it should be checked immediately. ABS (Anti-lock Braking System) malfunction: During emergency braking, the ABS adjusts the pressure in the brake lines based on wheel speed to prevent wheel lock-up, ensuring the wheels remain in a state of controlled slip and intermittent braking to avoid danger.
112
Share

What are the functions of an engine underguard?

Engine underguards serve to protect the underside of the engine compartment, reduce aerodynamic drag, and maintain cleanliness in the engine bay. Below are details regarding chassis underguards: Functions of chassis underguards: Chassis underguards enhance the flatness of the underbody, reducing air resistance during driving. They also prevent mud and water from splashing into the engine compartment. In poor road conditions, they can protect the engine oil pan and transmission. Common materials for chassis underguards: Common materials for chassis underguards include steel plates, aluminum alloy, titanium alloy, and resin materials. Each material has its own advantages and disadvantages. Metal underguards offer high strength but may cause resonance and increased noise. Resin materials are lighter and provide better underbody flatness.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.