What is the normal mileage for a new car when taking delivery?

2 Answers
LailaLynn
07/24/25 6:28am
Mileage displayed within the range of 0-100 kilometers is considered normal. Under normal circumstances, for domestically produced vehicles, a mileage of generally within 50 kilometers is considered normal, as a car inevitably needs to travel a certain distance from the factory to the 4S dealership. However, for imported vehicles, considering factors such as transportation, port handling, and customs clearance, the mileage generally should not exceed 100 kilometers. There are three key points to note when inspecting a new car: 1. Check the paintwork: The uniformity and smoothness of the seams are the focus of inspection. It is best to compare with two vehicles of the same model. The gaps between the doors, bumpers, and engine hood should be consistent. If the gaps are too large or the width differs from other vehicles, careful consideration is needed; 2. Check the tires: The tires of a new car should have no damage on the sidewalls, and the front tire sidewalls and tread should show no puncture marks. It is ideal if the tread hairs are intact on both front and rear tires, at least the rear tire hairs should be visible. If tread hair marks are missing on both front and rear tires but the odometer shows only a few kilometers, this is abnormal; 3. Check the nameplate: Each vehicle's nameplate corresponds to the unique engine number and chassis number. Verify these numbers with the certificate of conformity to ensure the codes match. Also, check the manufacturing date on the nameplate; the time between delivery and manufacturing should not exceed three months.
Was this review help?
14
3
Share
VonGrant
08/11/25 2:15am
I specifically researched this when I picked up my car. After a new car rolls off the production line, it undergoes factory testing, transportation, and the dealership's PDI inspection, so it's impossible for the mileage to be zero. Under normal circumstances, the mileage of a domestically produced car at delivery should be within 50 kilometers, while imported cars might have around 100 kilometers due to longer transportation distances. When picking up the car, it's best to check the production date as well. If it's a new car within three months, even 30-40 kilometers is completely normal. I remember last time my friend picked up a German imported car with 89 kilometers on the odometer, and the salesperson explained that the distance from the port to the dealership was quite long. I recommend paying attention to details like whether the tire hairs are intact and if the interior protective film has been removed when picking up the car. These details can better reflect the car's usage condition than just looking at the mileage.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is a Tiptronic Transmission?

Tiptronic transmission refers to a car that has both manual and automatic gear functions. The automatic transmission includes a Tiptronic transmission, which is an automatic transmission that can shift gears on its own. Below is relevant information about Tiptronic transmissions: 1. Introduction: A Tiptronic transmission is essentially a type of automatic transmission that simulates the operation of a manual transmission through an electronic control system. The Tiptronic transmission is designed to enhance the fuel efficiency and handling of an automatic transmission by allowing the driver to control the shift timing, which would otherwise be determined by the computer. At the same time, in urban traffic jams, the automatic mode can still be used for convenience. 2. Pros and Cons: Besides the advantages of an automatic transmission, a Tiptronic car also allows manual control, offering some driving pleasure. The biggest drawback of a Tiptronic car is its higher fuel consumption. The manual mode is not entirely manual and is limited by sensors, meaning it is impossible to directly shift to gears 1, 2, or 3 when driving at 120 km/h. According to reports, the manual mode in Tiptronic transmissions is rarely used. Compared to automatic transmissions, the technology is not yet mature.
5
4
Share

What is the purpose of paddle shifters?

Paddle shifters are a quick-shifting device installed on semi-automatic clutches in cars. Their function is to allow gear changes without stepping on the clutch pedal, directly through the paddle shifters, significantly enhancing driving operability and convenience. The paddles are typically located behind the steering wheel, enabling gear shifts without the driver's hands leaving the wheel. Paddle shifters can be categorized into two types based on their form: Fixed type: Fixed paddle shifters remain stationary relative to the dashboard, meaning they do not rotate with the steering wheel during turns. Moving type: Moving paddle shifters remain stationary relative to the steering wheel, meaning they rotate along with the steering wheel during turns. The most common placement for paddle shifters is on the left and right inner arcs of the steering wheel. Both paddles serve the same function—they are not dedicated to upshifting or downshifting individually. Instead, lifting the paddle toward the driver with the index and middle fingers triggers an upshift, while pressing it toward the steering wheel with the thumb triggers a downshift. With paddle shifters, when the vehicle is in Drive (D) mode, the driver can manually override the transmission at any time using the paddles, which is particularly useful for rapid acceleration during overtaking. For example, when the left paddle is used to downshift consecutively, the engine RPM surges, providing ample power to swiftly pass slower vehicles ahead. This is the exhilarating driving experience paddle shifters offer. However, in D mode, if the paddles are not used for a certain period, the transmission will revert to automatic mode. To fully engage manual mode, drivers can try the Sport (S) mode, where the transmission remains in manual control as long as no shift commands are issued via the paddles. Important notes on using steering wheel paddle shifters: Automatic cars equipped with paddle shifters are invariably equipped with a manual mode, as the paddles' primary function is to allow manual gear changes. Even in manual mode, the transmission remains an automatic at its core. Human control can never match the precision of computer-controlled shift timing, so manual mode typically results in higher fuel consumption. When moving forward, turning the steering wheel to the left steers the car left, and turning it right steers the car right—similar to how it works in reverse. When correcting the car's direction, if the car veers to one side, the driver must steer in the opposite direction to straighten it. For example, if the car drifts left, the steering wheel should be turned right. If the car continues to veer in the same direction, it doesn't mean the correction was wrong; rather, the initial correction only reduces the degree of deviation. Only after the steering wheel is centered can further turning in the opposite direction change the car's heading.
17
2
Share

What Causes the Inability to Start After Parking?

The reasons for the inability to start after parking are fuel injector leakage and a damaged carbon canister solenoid valve. Below are detailed explanations: Fuel Injector Leakage: Fuel injectors normally spray fuel, but leakage constitutes additional fuel supply. The more severe the fuel injector leakage, the richer the air-fuel mixture becomes, leading to difficulty in starting a hot engine. Damaged Carbon Canister Solenoid Valve: During a hot start, fuel atomization is normal and does not require additional fuel vapor. If the carbon canister continues to supply fuel vapor to the intake manifold, the air-fuel mixture becomes too rich, making it difficult to start. Faulty Intake Air Temperature Sensor: A faulty intake air temperature sensor results in incorrect fuel injection correction values, causing difficulty in starting a hot engine.
9
5
Share

Why do some Teslas have blue license plates?

Some Teslas have blue license plates because they were registered early and were not in the first batch of pilot cities for new energy vehicle license plates. Below is a detailed introduction to vehicle license plates: Common classifications of vehicle license plates: They are usually divided into small vehicle license plates (blue background with white characters and white borders), special license plates for new energy vehicles (green background with black characters and black borders, gradient green), large vehicle license plates (yellow background with black characters and black borders), and Hong Kong-Macau entry-exit vehicle license plates (black background with white characters, white "Hong Kong" or "Macau" characters, and white borders), etc. Composition of vehicle license plate numbers: The front part of the license plate consists of the abbreviation of the province and the code of the prefecture-level city, followed by five digits combining numbers and letters. Currently, the country has implemented a new license plate policy where you can choose your own license plate number, but the first two characters must be letters, which can be selected as desired, and the last three are numbers, which can also be freely chosen.
8
2
Share

What to Do When the Fuel Filler Door Won't Pop Open?

Use the emergency release switch or go to a 4S repair shop for assistance. Here is more information about the fuel filler door: 1. Introduction: The fuel filler door is the cover on a car's fuel tank used for storing gasoline. It is square-shaped, made of stainless steel, and has excellent sealing. There is only a small circular opening, about the size of a bottle cap, for easy storage. It is usually located at the rear of the vehicle. 2. Left vs. Right Opening: The placement considers road traffic rules in different countries, driver safety, and convenience for refueling. There is no inherent advantage to having it on the left or right side.
7
2
Share

What is the principle of a torque wrench?

The principle of a torque wrench is based on the bending principle of beams, the bending principle of torsion bars, and the compression principle of helical springs, allowing it to measure the torque applied to a nut. A torque wrench, also known as a moment wrench, torque adjustable wrench, is a type of wrench generally categorized into three types: manual torque wrenches, pneumatic torque wrenches, and electric torque wrenches. The torque wrench has a long elastic rod, with a handle at one end and a square or hexagonal head at the other end. A replaceable socket is fitted over the square or hexagonal head and secured with a steel ball. A long pointer is also mounted at the top. The scale plate is fixed on the handle base, with each division representing 1 Newton.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.