What is the normal kPa tire pressure for the H6?

2 Answers
AngeloAnn
09/06/25 4:33am
The H6's standard tire pressure is generally around 230 kPa. In addition to following the manufacturer's recommended standard tire pressure, these important factors should also be considered: 1. Seasonal factors: In winter, it is advisable to slightly increase the tire pressure by about 0.2 bar based on the standard tire pressure. In summer, follow the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the pressure can generally be about 0.1 bar lower than the standard to avoid tire blowouts due to high temperatures. 2. Load capacity: Follow the lower limit of the standard tire pressure (the tire pressure indicated on the vehicle's sticker can serve as a reference for the minimum tire pressure). When fully loaded, follow the upper limit of the standard tire pressure (the maximum tire pressure indicated on the tire can serve as a reference for the theoretical maximum tire pressure). 3. Tire pressure measurement environment: The tire pressure of a cold tire and a hot tire is different, so attention should be paid during measurement. The difference between the two is about 0.2 bar. Ensure that the tire has been parked for at least three hours and has not been driven more than 2 kilometers. If tire pressure can only be measured when the tire is hot, subtract approximately 0.2 bar from the measured value to obtain the tire's cold inflation pressure.
Was this review help?
19
4
Share
StJasper
09/18/25 4:29am
I've been driving an SUV for several years, and the tire pressure is usually most suitable between 220 to 250 kPa. I remember one time when the tire pressure was low, only 180 kPa, and driving felt particularly strenuous with increased fuel consumption. Later, I inflated the tires to 240 kPa at a gas station, and it immediately felt much better. In winter when it's cold, tire pressure tends to drop, so I check it more frequently, keeping it around 230 kPa. In summer when it's hot, tire pressure rises, so don't overinflate—250 kPa is enough. The manufacturer's recommended values are usually on the door edge or in the manual, and it's best to refer to those. Regular checks can prevent uneven tire wear and extend their lifespan.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Is the Shadow Leopard an automatic or manual transmission?

Shadow Leopard is automatic. Below is a relevant introduction about the Trumpchi Shadow Leopard: Product Introduction: The GAC Trumpchi Shadow Leopard is a sporty-styled sedan built on the GPMA platform, featuring the brand's latest design language with two styling options for consumers. In terms of powertrain, the new car initially comes equipped with the all-new 1.5T engine from the Julang Power series, with a potential 2.0T version to be added later. Configuration Parameters: The Shadow Leopard is powered by the all-new third-generation 1.5T-GDI engine from the Julang Power series, delivering a maximum power of 130kW and peak torque of 270N·m. With GCCS technology at its core, it integrates dual-flow turbocharging, top-mounted water-cooled intercooler, high-pressure injection, large-inertia balance shaft, intelligent thermal management, and low-friction technology, achieving a fuel consumption as low as 5.7L per 100km.
12
5
Share

What is the optimal tire pressure for the Tayron?

The normal tire pressure range for the Tayron is around 2.3-2.5 bar. According to the international standard GBT2978-2008, the recommended tire pressures for different types of tires are as follows: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and misalignment, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate the tire, leading to internal cracks or blowouts. Hazards of underinflated tires: Increases friction with the road surface, raising fuel consumption; Causes heavy steering and misalignment, compromising driving safety; Increases movement of tire components, leading to abnormal heat generation due to excessive rolling; Weakens cord and rubber functionality, causing delamination, cord breakage, or excessive friction with the rim, damaging the bead area and causing abnormal wear; Multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to blowouts; Increases tire deformation, causing sidewall cracks and flexing movements, leading to overheating, rubber aging, cord fatigue, and breakage. It also increases the tire's contact area, accelerating shoulder wear.
18
2
Share

What is the fuel tank capacity of the new Bora?

Volkswagen Bora has different fuel tank capacities of 50L and 55L depending on the version. The manufacturer recommends using 92-octane gasoline. For safety reasons, the engine must be turned off before refueling, and the fuel tank cap can be opened by pressing it without locking the car. Here are the relevant details: Refueling precautions: To prevent safety hazards, ensure the fuel nozzle is fully inserted into the fuel tank. The fuel tank cap must be tightly closed; otherwise, it may lead to fuel evaporation at best or accidents at worst. Refueling process: First, press the left side of the fuel tank cap to open it. Turn the fuel tank cap counterclockwise to remove it. The fuel tank cap has a designated placement position; simply insert it there. Insert the fuel nozzle into the fuel filler neck until it reaches the limit position. If the fuel pump is automatically stopped for the first time, it indicates the tank is full. Do not continue refueling, as this may fill the expansion chamber in the tank with fuel. Do not remove the fuel nozzle immediately; leave it in the filler neck for 5 seconds to allow any remaining fuel to drain into the tank. Tighten the fuel tank cap clockwise until you hear a click sound indicating it is properly sealed. Close the fuel tank cap firmly until you hear a "click" sound.
14
4
Share

What is the normal tire pressure for the Geely Boyue?

The normal tire pressure range for the Geely Boyue is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Geely Boyue's tire pressure monitoring can be viewed on the dashboard. The tire pressure monitoring system automatically monitors the tire pressure in real-time during driving and alerts the driver in case of tire leakage or low pressure to ensure driving safety. Generally, a tire pressure exceeding 2.8bar is considered too high, while a pressure below 2.0bar is too low. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure. The system usually alerts if the pressure is below 1.8bar or above 3.0bar. In this case, a tire inspection and pressure adjustment are required. Tire pressure monitoring not reset. After inflating the tires, if the tire pressure is not reset in time, the system still records the previous data, causing the indicator light to come on. Simply resetting the tire pressure will resolve this issue. Damaged tire pressure sensor. The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors the tire pressure. If the sensor is damaged during driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new one.
6
3
Share

What Causes the Steering Wheel of Wuling Hongguang to Become Heavier?

Wuling Hongguang steering wheel becomes heavier due to lack of lubrication in the steering gear, low tire pressure, battery depletion, and unmaintained return oil filter in the oil reservoir. Below are detailed explanations: Lack of lubrication in the steering gear: When the car's steering gear lacks lubrication, symptoms such as steering jamming and a heavier steering wheel may occur. Low tire pressure: When the car's tire pressure is too low, the contact area between the tire and the ground increases, leading to greater resistance during driving, which makes the steering wheel feel heavier. Battery depletion: After prolonged battery depletion, the steering wheel loses the assistance from the electric motor. Unmaintained return oil filter in the oil reservoir: Long-term lack of maintenance or untimely replacement of the return oil filter in the oil reservoir can easily cause blockages, resulting in poor circulation of power steering fluid and a heavier steering wheel. The issue of a heavy steering wheel can be resolved by replacing the power steering fluid, checking the power steering system, and ensuring sufficient front tire pressure. Replace the power steering fluid: To ensure the car operates normally. Check the power steering system: Most components in a car rely on electricity to function. Ensure sufficient front tire pressure: If the pressure is insufficient, it should be promptly replenished to ensure the car operates normally. The Mazda 6's heavy steering wheel can also be resolved by replacing the power steering fluid, checking the power steering system, and ensuring sufficient front tire pressure. Replace the power steering fluid: Prolonged use of power steering fluid may lead to contamination. In such cases, the fluid should be replaced as soon as possible to ensure the car operates normally. Check the power steering system: Since most car components rely on electricity to function, if the steering wheel becomes difficult to use, the power steering system should be checked for issues, and the car should be taken to a repair shop for professional maintenance. Ensure sufficient front tire pressure: If the steering wheel becomes heavier during turns, check if the front tire pressure is adequate. If the pressure is insufficient, it should be promptly replenished to ensure the car operates normally.
3
1
Share

How to Regain Your Driver's License After Losing All 12 Points?

For drivers holding Class A or B licenses, if they accumulate 12 points within one scoring cycle, they must apply for a license downgrade within 30 days. If a driver's license is revoked for accumulating 12 points, the license will be temporarily suspended, and the driver must retake the written test (Subject 1). Only after passing the test can they resume driving.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.