What is the normal idle speed for the Changan CS55?

1 Answers
MichaelAnn
07/29/25 2:18pm
Changan CS55's normal idle speed ranges between 600 to 850 RPM. Idle speed refers to the engine operating without any load, only overcoming the internal friction resistance of its components, without delivering any external power output. The minimum speed required to maintain stable engine operation is known as idle speed, which is one of the fundamental operating conditions of an engine. Idle condition means the engine is running without any load. The Changan CS55 is an SUV model launched by Changan Automobile, with a body length of 4500mm, width of 1855mm, height of 1690mm, and a wheelbase of 2650mm. The vehicle is equipped with Changan's H-series engine, the BlueCore 1.5T VVT DOHC all-aluminum engine, delivering a maximum power of 115kW and a maximum torque of 225Nm.
Was this review help?
2
0
Share
More Forum Discussions

What is the normal temperature of car coolant?

Car coolant's normal temperature is indicated by the center of the gauge at 90 degrees. Normally, after turning on the ignition switch, the coolant temperature gauge's pointer should deflect from 100°C towards 40°C, then gradually indicate the correct coolant temperature. Here's some information about coolant: 1. The full name of coolant is antifreeze coolant. It prevents the engine from freezing in winter and cools the engine when it generates high temperatures during operation, ensuring the vehicle can function properly in various environments. 2. Car coolant is composed of water, antifreeze, and additives. Based on its composition, it can be classified into alcohol-based, glycerol-based, and ethylene glycol-based types.
2
1
Share

What Causes the Friction Sound Between Tires and the Ground When Turning?

When a car turns, the abnormal sound from the tires is the friction noise between the rubber and the ground, which is a normal phenomenon. Car tires in contact with the ground will produce various levels of noise due to the type or unevenness of the road, the speed of the car, the type of tires, and the air pressure in the tires themselves. Other reasons for abnormal tire sounds when turning are introduced as follows: 1. Reason one: The sound of tires rubbing against the ground, alignment is needed. 2. Reason two: If it's a rattling sound, the CV joint is problematic and must be replaced. 3. Reason three: A metallic scraping sound could be the brake pad shield rubbing against the brake pad, which can be resolved by prying the shield with a screwdriver.
7
0
Share

What does the yellow P light indicate?

This indicates that the parking brake is engaged. It could mean that the handbrake is not released or not fully released. The following explains the meanings of the P light illumination: 1. A red P light indicates that the parking brake system is active, meaning the handbrake is engaged, and it is displayed in red on the instrument cluster as a normal status, not a fault. If it lights up or flashes along with other warning lights, such as the ABS light, it indicates a system malfunction. 2. A yellow P light generally indicates that there is a fault stored in the parking brake or ABS system. Further diagnosis and repair are required. 3. A green or blue P light indicates that the automatic parking system (AUTOHOLD) is functioning normally. The P light will illuminate to alert the driver when the system is active.
19
4
Share

What are the three horizontal buttons on the Kicks key?

The three horizontal buttons on the Kicks key are for opening the trunk. More information about the Kicks is as follows: 1. The Kicks is positioned as a compact SUV, with a design that appeals to young consumers. 2. The domestic version of the Kicks has the same styling as the overseas version, featuring the new V-Motion family front grille with bold V-shaped chrome accents paired with a matte black front grille, and a thick black honeycomb matte mesh that creates a strong sporty vibe. 3. The Kicks has a minimum ground clearance of 188mm, with approach and departure angles of 20 degrees and 28 degrees respectively, ensuring good off-road capability.
16
1
Share

How to Add Windshield Washer Fluid to a Camry?

Add the windshield washer fluid through the opening of the black cap closest to the right headlight. Below is some relevant information about windshield washer fluid: 1. Windshield washer fluid, commonly known as glass water, is a consumable used in cars. There is usually a windshield washer fluid level indicator on the car's dashboard. If the fluid is running low while driving, this light will start flashing, reminding you to add more. High-quality windshield washer fluid mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. 2. Windshield washer fluid is commonly referred to as glass water. When the transparency of the front windshield deteriorates, spraying some glass water can restore a clear and bright view. Especially during nighttime driving, dust on the glass can scatter light, making it necessary to spray glass water to maintain optimal transparency of the windshield.
16
4
Share

What is the Scrap Life of a Pickup Truck?

Currently, most regions in China follow the "Mandatory Scrapping Standards for Motor Vehicles" regulation, which stipulates that pickup trucks must be scrapped when they reach 15 years of service or 600,000 kilometers of mileage. However, in some areas, the 15-year scrapping rule for pickup trucks has been abolished, but vehicles that fail the annual inspection must still be scrapped. For household pickup trucks, there is no mandatory scrapping period. Here is some related information: The vehicle scrapping period refers to a safety inspection system based on the number of seats and the duration of use. According to the regulations, small and micro non-operational passenger vehicles, large non-operational cars, and wheeled special machinery vehicles have no usage time limit.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.