···
Log in / Register

What is the normal high pressure for a car air conditioning system?

1Answers
StRichard
09/07/2025, 02:45:15 AM

Under normal operating conditions of the air conditioning system, the low pressure typically ranges between 1.0—2.5 bar, while the high pressure ranges between 15—18 bar. The car air conditioning refrigeration system consists of components such as the compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. These parts are connected into a sealed system using copper pipes (or aluminum pipes) and high-pressure rubber hoses. When the refrigeration system is in operation, the refrigerant circulates in different states within this sealed system, with each cycle comprising four basic processes. Below is an introduction to air conditioning maintenance: 1. Comprehensive inspection of the air conditioning system: Before using the air conditioning for the first time in summer, it is advisable to inspect the system, such as checking the refrigerant and whether the air filter is too dirty via the receiver-drier, and checking for any foreign objects in the radiator. 2. Pay attention to air conditioning cleaning: The air filter should be replaced regularly to prevent moldy odors from developing in the air conditioning system. Additionally, the condenser should be cleaned periodically, and for a thorough cleaning, the radiator should be removed.

Was this review help?
101
Share
More Q&A

Is running a yellow light considered a traffic violation? Will points be deducted?

Running a yellow light is not considered a violation if the vehicle has already crossed the pedestrian crossing line. However, if the vehicle has not crossed the line, it is considered a yellow light violation. Traffic authorities will not deduct points from the driver but will issue an educational warning. Below are the relevant penalty regulations for traffic light violations: Running a yellow light primarily results in an educational warning, with no immediate penalties. Running a red light results in 6 points deducted and an unspecified fine. Traffic rules: When the light is green, vehicles are permitted to proceed, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the light is yellow, vehicles that have already crossed the stop line may continue. When the light is red, vehicles are prohibited from proceeding.
115
Share

Is the passing rate for driver's license exams higher in summer?

Whether it's easy to pass varies from person to person. As long as the qualifications are good and the basic skills are solid, the passing rate naturally won't be a problem, whether in winter or summer. Introduction: Reverse parking is a mandatory test item for obtaining a small car driver's license after 2013. It assesses the driver's ability to operate the vehicle in a confined space. Reverse parking is a key evaluation point in the driver's test, which involves maneuvering the vehicle correctly into a garage from both sides while in motion. Categories: The three most common types of reverse parking are: the first is the "non"-shaped reverse parking, commonly found in large shopping malls. The second is the roadside "one"-shaped reverse parking, also known as parallel parking. The third is the less common diagonal reverse parking.
120
Share

Are Electric Mopeds Classified as Motor Vehicles or Non-Motor Vehicles?

Electric mopeds fall under the category of motor vehicles because their maximum speed exceeds 25 kilometers per hour, and their total weight surpasses 55 kilograms, meeting the national standards for motor vehicles. Regulations: According to the mandatory national standard for electric bicycle safety technical specifications implemented in China on April 15, 2020, the maximum speed of an electric bicycle must not exceed 25 kilometers per hour, and the total weight of the vehicle must not exceed 55 kilograms. Exceeding these limits classifies the vehicle as an electric moped under the motor vehicle category. Regarding Driver's License: To operate an electric moped, a motorcycle driver's license is required. Driving without a license constitutes unlicensed operation of a motor vehicle, and in the event of a traffic accident, the driver will bear full or primary responsibility.
107
Share

How Many Seconds Can the Clutch Be Pressed During Subject 3 Starting?

Subject 3 starting requires the clutch to be pressed for no more than 5 seconds, as the entire starting process must be completed within 10 seconds. Generally, pressing the clutch for over 5 seconds will cause the entire starting process to exceed 10 seconds. Observe the surroundings: Before starting, check the rearview mirror to ensure there are no vehicles approaching from behind before proceeding. This not only alerts other drivers of your intention to start but also helps you stay calm by being aware of your surroundings. Pay attention to clutch operation: Turn on the turn signal before starting. Gently lift the clutch to the biting point and hold it steady. Once the car begins to move forward slowly, gradually release the clutch and lightly press the accelerator to start smoothly.
120
Share

Is the 12123 Driving Test Extension Accurate?

12123 Driving Test Extension is accurate information, because 12123 is the only official APP of the traffic management department, so the extension information on it is the same as that of the vehicle management office. Content: After completing the subject one test of the driver's license, subject two and subject three tests should be passed within three years. If they cannot be passed, the content of the test will be invalid, and you should re-register for the subject one test. After the new test regulations, both subject two and subject three have five chances. If you cannot pass the test within five chances, you will have to retake the subject one test. Sequence: The order of the test subjects is carried out in sequence according to traffic regulations and related knowledge, field driving, and road driving.
115
Share

Can a large iron barrel hold 220 liters of diesel?

A large iron barrel cannot hold 220 liters of diesel. Generally, the maximum capacity of an iron barrel is 210 liters, which is insufficient for 220 liters of diesel. Gasoline and engine oil should not be mixed for use. Reasons: Although both diesel engine oil and gasoline engine oil are blended from base oils and additives (including detergents, dispersants, antioxidants, anti-wear agents, anti-corrosion agents, etc.), there are some differences in the requirements for gasoline engine oil and diesel engine oil due to the structural and operational differences between diesel engines and gasoline engines. Gasoline selection: Higher compression ratios result in better power performance, higher thermal efficiency, and improved vehicle acceleration and top speed. However, due to limitations in cylinder material performance and gasoline combustion knock, the compression ratio of gasoline engines cannot be too high. Simply put, high-compression-ratio vehicles require high-octane fuel.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.