What is the normal fuel consumption for the Jiefang 550?

1 Answers
LilyAnn
07/30/25 5:15am
The Jiefang 550 has a fuel consumption of 33L per 100 kilometers. Below are the relevant details about the Jiefang 550: 1. Power: Equipped with a 550 Xichai engine, it delivers a maximum output power of 550 horsepower and a maximum torque of 2600 Nm, with an average fuel consumption of 33L per 100 kilometers. It also uses a Parker 1000FH coarse filter, which not only effectively filters impurities in the fuel system but also protects the expensive fuel system, eliminating the need for later modifications for drivers using 'small oil'. 2. Range: The J6P 550 features a dual-tank design with capacities of 800+500 liters. Even if the fuel consumption is slightly high, the total tank capacity reaches 1300 liters. Based on a fuel consumption of 33L per 100 kilometers, the theoretical single-trip range is 4000 kilometers, meeting the demands of long-distance cargo transport.
Was this review help?
3
0
Share
More Forum Discussions

Does Geely Car System Upgrade Cost Money?

Geely car system upgrade costs money, and the price varies depending on different manufacturers' 4S stores. Introduction to car system upgrade: The car multifunctional upgrade control system retains all the original functions of the car. It uses dedicated plug-in connectors, imported original automotive standard wires, and independently developed host technology to upgrade the related functions of the car, improving the car's configuration and equipping it with the functions of a high-end car. Methods for car system upgrade: When parking and turning off the engine, press the lock button on the original car remote control once to lock the car's starting system. Using advanced wiring technology, even if a thief removes the anti-theft host, the vehicle's starting device can still be locked, making it more difficult for the thief to remove the anti-theft device. The anti-theft concept of this product is to intercept and interfere with the input signal sent by the key chip to the engine electronic control unit, while also providing an alarm prompt.
15
0
Share

What Causes the Car to Shake When Shifting to D Gear?

Shifting to D gear causes the car to shake for the following reasons: 1. The engine speed is too high: When the engine is cold and just started, the engine speed is too high, and the torque converter transmits more power, resulting in greater impact force and more noticeable shaking when shifting to D gear. 2. The brake is not pressed firmly: At the moment of shifting, the engine power is directly transmitted to the wheels. If the brake is not pressed firmly, the wheels will move slightly when shifting to D gear, and the car will suddenly move forward, causing a stronger shaking sensation. 3. The brake is released too early: This causes abrupt power engagement. Without the limiting effect of the brake, the drive wheels suddenly receive power at the moment of gear engagement, causing the car to move forward directly and resulting in shaking.
17
0
Share

Where is the seat ventilation in the Mercedes-Benz E300L?

Mercedes-Benz E300L is not equipped with seat ventilation function. The following is a detailed introduction to the central control buttons of the Mercedes-Benz E300L: 1. Electronic Stability Program (ESP): The system is enabled by default. It is generally not recommended to turn it off unless driving on slippery roads such as rain or snow. 2. Parking Radar/Image: The central control screen displays the image, and the radar will emit an alarm sound. 3. Blind Spot Warning System: When there are other vehicles in the blind spots on both sides of the rear, the indicator lights on the rearview mirror will flash to alert the driver not to change lanes. If the driver does not notice the indicator lights and prepares to change lanes, the system will emit a warning sound. 4. Forward Collision Prevention System: When the distance between the vehicle and the car in front is too close, the system will sound an alarm to alert the driver. If the driver does not take action, the system will automatically brake the vehicle.
16
1
Share

How fast can you drive in a 70 km/h average speed check zone?

In a 70 km/h average speed check zone, the maximum speed you can drive is 77 km/h, but it's best to maintain a speed below 77 km/h throughout the entire zone. According to regulations, if your speed exceeds the limit by less than 10%, you will only receive a warning without any penalty points or fines. Here are more details about speeding penalties: 1. Exceeding the speed limit by less than 10%: no penalty. 2. Exceeding the speed limit by 10% to less than 20%: a fine of 200 RMB and 3 penalty points. 3. Exceeding the speed limit by 20% to less than 50%: a fine of 200 RMB and 6 penalty points. 4. Exceeding the speed limit by 50% or more: a fine of 2000 RMB, 12 penalty points, and possible license suspension.
9
2
Share

What is the maximum speed of the Geely Vision X3 on the highway?

Geely Vision X3 can reach a speed of 140 km/h on the highway. Overtaking: It is important to clearly identify the driving lane, overtaking lane, and road signs. On the highway, the lane closest to the central barrier is the overtaking lane. If you are not overtaking, avoid staying in the overtaking lane for an extended period. Generally, the far-right lane is the emergency lane, and you should never overtake from the emergency lane. Driving speed: Pay attention to your driving speed. On the highway, driving slower does not necessarily mean safer. A speed of 80 to 100 km/h is considered relatively safe for small vehicles. Exiting the highway: When exiting the highway, make sure to identify the correct exit. If you miss your exit, continue driving and take the next exit. Never reverse or make a U-turn on the highway.
8
3
Share

What is the normal range of run-flat tire pressure for a BMW X3?

The normal range of run-flat tire pressure for a BMW X3 is 2.3-2.5 bar, with a maximum not exceeding 3.0 bar and a minimum not below 2.1 bar. Tire pressure is crucial for tires; it should neither be too high nor too low. If the pressure is too high, it will reduce the contact area between the tire and the ground, leading to decreased tire grip. If the pressure is too low, it can cause the tire to exhibit wave-like deformation during high-speed driving, accelerating tire aging and increasing the risk of a blowout. Tires are rubber products and should normally be replaced every four years. After installing new tires, it is essential to perform a balance test on each wheel to prevent abnormal vibrations during high-speed driving.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.