What is the normal fuel consumption for the Ford Kuga 2.0T AWD?

1 Answers
LeCarson
07/30/25 3:24am
The actual fuel consumption of the Ford Kuga 2.0T AWD is around 10L. The following factors affect vehicle fuel consumption: 1. Influencing factors: Engine displacement, vehicle weight, driving conditions, and air resistance can all affect fuel consumption. Even for the same vehicle, different driving habits result in different fuel consumption. 2. Increased fuel consumption: Frequent sudden acceleration or deceleration while driving can increase fuel consumption by 5-30%. 3. Driving conditions: The road conditions can also affect fuel consumption. Driving on poor road conditions increases the engine load, requiring more fuel consumption.
Was this review help?
7
4
Share
More Forum Discussions

How to Flip Up the Front of a Chenglong M3 Truck?

Generally, there is a smaller handle next to the truck cab, which is the safety pin. You need to pull it first. Then press the larger handle to flip it up. However, different types of trucks may have different operation methods.
18
3
Share

How to Restore Plastic Damaged by Perfume?

Dip some Baihua oil on the stain, then gently wipe it with a soft cloth, starting lightly and gradually increasing pressure until the stain is just removed. You can also apply some toothpaste and gently scrub with a toothbrush, which will remove many of the stains.
20
3
Share

How to Adjust a Car Steering Wheel That is Off to the Right?

Adjust it from the tie rods on the steering gear—tighten one side and loosen the other to align the steering wheel. If the steering wheel is off by just one spline tooth, you can also remove the steering wheel and rotate it by one tooth to correct the angle.
1
3
Share

How to repair the power folding mirror of CX5?

Prepare the tools needed for disassembling the Bora's mirror. Follow the wiring harness to locate the connector of the tweeter, then gently unplug it by hand. Find the connector of the mirror's wiring harness and unplug it by hand as well. There are three small screws in total. Take out a Phillips screwdriver and use it to remove these three screws. Make sure to keep the removed screws safe. Simply hold the base of the mirror with your hand and gently pull it outward. This will separate the mirror from the door panel.
20
2
Share

How to perfectly solve the steering gear noise issue in the Mazda Atenza?

The cause of abnormal noise when turning the steering wheel should be determined based on the specific location from which the sound originates. If the noise occurs only after activating the turn signal switch and then turning the steering wheel, it is likely the sound from the return spring of the turn signal auto-return mechanism. If the noise is heard from beneath the steering wheel whenever the steering wheel is turned, whether stationary or while driving, the steering column dust cover should be inspected. If the noise seems to come from beneath the steering wheel during rotation, it may be due to the universal joint in the steering column.
20
3
Share

How to Shift to Neutral (N) Gear When the BMW is Turned Off?

First, locate the position of the gear lever dust cover. After opening the gear lever dust cover, find the unlocking slot. Use a screwdriver from the vehicle toolkit to insert into the slot. Pull the screwdriver backward until you hear a click sound, then leave it inserted in the slot to unlock the transmission lock. You can then shift into Neutral (N) gear.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.